Eastman - Building & Construction Market

Manage Profile

Home

Markets

Building & Construction

FAQs

Building & Construction

Product Selector

Eastman Innovation Lab


		Contact


General

	What is a common adhesion promoter for automotive plastics?
	Which Eastman adhesion promoter is recommended for use as an adhesion promoter for polyethylene?
	Does Eastman offer any non-chlorinated adhesion promoters?
	To obtain adhesion for one-step coatings for polyolefin plastics, can the adhesion promoter be simply postadded to the existing coating formula?
	What publications are available on the application of Eastman adhesion promoters?
	Is there an alternative to chlorinated polyolefin adhesion promoters?
	Why are coatings difficult to adhere to plastics?
	Which products does Eastman offer in low-HAPs solvents?
	Will CP 310W Water-Reducible Chlorinated Polyolefin Adhesion Promoter, CP 347W Water-Reducible Chlorinated Polyolefin Adhesion Promoter, or Eastman CP 349W Water-Reducible Chlorinated Polyolefin Adhesion Promoter give properties equivalent to solventborne adhesion promoters?
	Can waterborne Eastman CPOs be used as stir-in additives?
	Is there a universal adhesion promoter that is good for a variety of plastics such as polyethylene, polypropylene, thermoplastic polyolefin, ABS, nylon, PVC, and other plastic polymers?
	Which solvent borne adhesion promoters are recommended for use as primers for polypropylene and thermoplastic olefin (TPO)?
	What is a TPO and what factors affect adhesion to TPOs?
	What is a good coalescing aid for high-gloss architectural and maintenance coatings?
	What is a good non-VOC plasticizer to substitute for a coalescing aid in a flat interior latex paint?
	Where can I find information on MIR values for Eastman solvents?
	What is Eastman TEG-EH plasticizer, and how is it used?
	If paint is applied at temperatures below painting conditions on the can or label, can problems be expected?
	What are the major differences in water-based adhesion promoters offered by Eastman?
	Why can't any solvent work as a coalescing agent?
	Gels appear in my clear coating. What could cause this problem?
	Why should a coalescing aid have low water solubility?
	Why should I use Texanol ester-alcohol (2,2,4-trimethyl-1, 3- pentanediol monoisobutyrate) instead of another coalescing aid?
	What is Texanol ester-alcohol (2,2,4-trimethyl-1, 3- pentanediol monoisobutyrate) and why is it used as a coalescing agent?
	If the paint finish has craters, what can be done to correct the coating?
	How can a coalescing agent be selected for a latex paint?
	What happens if too much or too little coalescing agent is used in latex paint?
	What is the function of a coalescing aid in waterbased paints?
	Which solvent borne adhesion promoters are recommended for use as stir-in additives to paints, inks, or adhesives?
	Why is evaporation rate of the solvents in paint important to a successful coating?