Eastman
SustainabilityNews CenterInvestorsCareersWorldWideCustomer Center
FAQs
General
Which solvent borne adhesion promoters are recommended for use as primers for polypropylene and thermoplastic olefin (TPO)?
What is a common adhesion promoter for automotive plastics?
What is Eastman TEG-EH plasticizer, and how is it used?
What is a good non-VOC plasticizer to substitute for a coalescing aid in a flat interior latex paint?
Why are coatings difficult to adhere to plastics?
Gels appear in my clear coating. What could cause this problem?
Will CP 310W Water-Reducible Chlorinated Polyolefin Adhesion Promoter, CP 347W Water-Reducible Chlorinated Polyolefin Adhesion Promoter, or Eastman™ CP 349W Water-Reducible Chlorinated Polyolefin Adhesion Promoter give properties equivalent to solventborne adhesion promoters?
Is there an alternative to chlorinated polyolefin adhesion promoters?
Why can't any solvent work as a coalescing agent?
Which Eastman™ adhesion promoter is recommended for use as an adhesion promoter for polyethylene?
What are the major differences in water-based adhesion promoters offered by Eastman?
Where can I find information on MIR values for Eastman™ solvents?
If paint is applied at temperatures below painting conditions on the can or label, can problems be expected?
What is Eastman Texanol™ ester-alcohol (2,2,4-trimethyl-1, 3- pentanediol monoisobutyrate) and why is it used as a coalescing agent?
If the paint finish has craters, what can be done to correct the coating?
Does Eastman offer any non-chlorinated adhesion promoters?
Why should I use Eastman Texanol™ ester-alcohol (2,2,4-trimethyl-1, 3- pentanediol monoisobutyrate) instead of another coalescing aid?
What is the function of a coalescing aid in waterbased paints?
What is a good coalescing aid for high-gloss architectural and maintenance coatings?
What publications are available on the application of Eastman™ adhesion promoters?
Which products does Eastman offer in low-HAPs solvents?
Can waterborne Eastman™ CPOs be used as stir-in additives?
To obtain adhesion for one-step coatings for polyolefin plastics, can the adhesion promoter be simply postadded to the existing coating formula?
What is a TPO and what factors affect adhesion to TPOs?
Is there a universal adhesion promoter that is good for a variety of plastics such as polyethylene, polypropylene, thermoplastic polyolefin, ABS, nylon, PVC, and other plastic polymers?
Which solvent borne adhesion promoters are recommended for use as stir-in additives to paints, inks, or adhesives?
Why is evaporation rate of the solvents in paint important to a successful coating?
How can a coalescing agent be selected for a latex paint?
What happens if too much or too little coalescing agent is used in latex paint?
Why should a coalescing aid have low water solubility?
Legal InfoPrivacy PolicySite IndexContact UsCopyright 2009 Eastman Chemical Company. All rights reserved.