Acetic Anhydride 
Acetic Anhydride is manufactured by Eastman and supplied in various grades.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Adhesion Promoter - 550-1 (25% in Aromatic 100)
AP 550-1 (25% in Aromatic 100) is a nonchlorinated polyolefin for improved coating adhesion on TPO and PP. It allows the formulation of melamine-cured systems with excellent performance properties previously only available in 2K systems.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Adhesion Promoter - 550-1 (25% in Xylene)
Eastman AP 550-1 (25% in Xylene) is a nonchlorinated polyolefin for improved coating adhesion on TPO and polypropelene-based substrates. It has excellent humidity & gasoline resistance particularly under 1K systems. It allows the formulation of melamine-cured systems with excellent performance properties previously only available in 2K systems.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Admex - 523 Polymeric Plasticizer
Admex™ 523 is a low molecular weight, polymeric plasticizer. It is characterized by a mild ester odor and very light color. It imparts excellent processability to PVC compositions and is compatible with a wide variety of other polymers.
Product availability by region: Asia Pacific | Latin America | North America
|
Admex - 525 Polymeric Plasticizer
| Admex™ 525 is a low molecular weight, polymeric plasticizer. |
Product availability by region: Asia Pacific | Latin America | North America
|
Eastman Advantis 153-2 25X adhesion promoter
Eastman Advantis™ 153-2 25X adhesion promoter is a 25% solution of a chlorinated polyolefin in xylene. It has a 21-25 wt % chlorine content and a Gardner color value of 12-15. It is recommended as an adhesion-promoting primer for untreated polyethylene-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 343-1 25X adhesion promoter
Eastman Advantis™ 343-1 25X adhesion promoter is a 25% solution of a chlorinated polyolefin in xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Advantis 343-1 25X demonstrates excellent adhesion to polypropylene-based substrates and promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 343-1 40X adhesion promoter
Eastman Advantis™ 343-1 40X adhesion promoter is a 40% solids solution of chlorinated polyolefin 343-1 solids in xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Advantis 343-1 40X demonstrates excellent adhesion to polypropylene-based substrates and promotes adhesion to steel, galvanised steel, phosphated steel, wood and rigid PVC.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 343-3 25X adhesion promoter
Eastman Advantis™ 343-3 25X adhesion promoter is a 25% solids solution of chlorinated polyolefin 343-3 in xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. Advantis 343-3 25X has a good solvent tolerance for a wide range of solvents. The high chlorine content of Advantis 343-3 25X gives improved compatibility with co-resins. It is also recommended as stir-in additive to promote adhesion to PP-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 343-3 50X adhesion promoter
Eastman Advantis™ 343-3 50X adhesion promoter is a 50% solution of chlorinated polyolefin in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. Eastman Advantis 343-3 50X adhesion promoter has a good solvent tolerance for a wide range of solvents. High chlorine content in Advantis 343-3 50X gives improved compatibility with co-resins. It is also recommended as stir-in additive to promote adhesion to PP-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 515-2 40A adhesion promoter
Eastman Advantis™ 515-2 40A adhesion promoter is a 40% solids solution of chlorinated polyolefin in Aromatic 100 and is a liquid at room temperature. Advantis 515-2 40A is compatible with a variety of resins. It is recommended as stir-in additive to promote adhesion to PP and other difficult-to-coat substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 515-2 40X adhesion promoter
Eastman Advantis™ 515-2 40X adhesion promoter is a 40% solids solution of chlorinated polyolefin in Xylene and is a liquid at room temperature. It is compatible with a variety of resins and is recommended as stir-in additive to promote adhesion to PP and other difficult-to-coat substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 550-1 25X adhesion promoter
Eastman Advantis™ 550-1 25X adhesion promoter (25% in xylene) is a nonchlorinated polyolefin for improved coating adhesion on TPO and polypropelene-based substrates. It has excellent humidity and gasoline resistance, particularly under 1K systems. It allows the formulation of melamine-cured systems with excellent performance properties previously only available in 2K systems.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
Eastman Advantis 730-1 20A adhesion promoter
Eastman Advantis™ 730-1 20A adhesion promoter (20% solids in Aromatic 100) is an efficient adhesion promoter in primers to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) substrates. It has excellent humidity and gasoline resistance and superior high temperature performance.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America
|
AQ - 55S Polymer
Eastman AQ™ 55S polymer is a water-dispersible sulfopolyester that has good film integrity when combined with other cosmetic ingredients. It is the preferred AQ polymer to improve water and smudge resistance of water-based makeup and mascaras, and in hairstyling products, it provides excellent hold under high-humidity conditions and tunable firmness. It has a Tg of about 55° C. The "S" indicates the product is supplied as solid pellets.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
AQ - 65S Polymer
Aqueous dispersions of Eastman AQ™ 65S polymer provide excellent water resistance, alcohol resistance, fast drying rates, low odor, and a consistently low coefficient of friction.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Benzoflex - 50 Plasticizer
Benzoflex™50 is a versatile benzoate ester plasticizer providing exceptional utility in polyvinyl acetate adhesives, efficiency in acrylic latex caulks, and excellent solvating characteristics in plastisol and dry blended vinyl formulations.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Benzoflex - 352 Plasticizer
Benzoflex™ 352 is a solid modifier with a very high melt point for use in hot melt adhesives and powder coatings to improve processing characteristics and physical properties. As a processing aid for plastics, Benzoflex™ 352 improves the flow of vinyls.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
N-Butanol
Eastman™ n-Butanol is a four carbon straight chain oxo alcohol. It is a medium-boiling liquid that is useful as a chemical intermediate and as a solvent for ambient dry and baking coatings.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Butyl Acetate
Eastman™ Butyl Acetate is a medium-boiling ester solvent with an evaporation rate of 1.0 making it ideal for quick drying nitrocellulose lacquers. A colorless liquid with a fruity odor, it is an active solvent for film-formers.
Product availability by region: Latin America | North America
|
N-Butyl Propionate
Eastman™ n-Butyl Propionate is a non-HAP, slow-evaporating, and urethane grade solvent with good solvent activity for most coating resins. It provides low volatility to coatings formulations.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Butyraldehyde - Dry
Eastman™ butyraldehyde is used as a fragrance intermediate.
Product availability by region: Asia Pacific | North America
|
C-11 Ketone
Eastman C-11 Ketone is a low-cost, slow-evaporating, low-density mixture of ketone solvents. It is useful as a retarder solvent for primers, coil coatings, maintenance coatings and high-solids enamels. In these coatings, it improves gloss and leveling, reduces orange peel, minimizes solvent popping, and helps reduce VOCs. In many coatings, it can be used alone or blended with other solvents to replace isophorone and dibasic esters. Eastman C-11 Ketone has good solvency for a wide range of resins including nitrocellulose, alkyds, polyesters, acrylics, epoxies, and some vinyl chloride/vinyl acetate copolymers. Compared with other solvents in the same evaporation range, C-11 Ketone often offers an economic advantage.
Product availability by region: Asia Pacific | Latin America | North America
|
Eastman cellulose acetate (CA-394-60LF)
Eastman Cellulose Acetate CA-394-60LF is a very high-melting, low odor cellulose ester having limited solubility and compatibility. This multipurpose rheology enhancer, offers high strength and good resistance to ultraviolet light, heat, oils, and greases. It is useful in lacquers for glass, plastic, wire and release coatings.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Eastman cellulose acetate butyrate (CAB-381-20BP) 100%
Eastman Cellulose Acetate Butyrate CAB-381-20BP grade ester is a lower hydroxyl content version of the standard CAB-381-20 and has a lower viscosity. The BP grade was designed primarily to meet the needs of European formulators.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Eastman cellulose acetate butyrate (CAB-553-0.4)
Eastman Cellulose Acetate Butyrate CAB-553-0.4 is soluble in low molecular weight alcohols as well as other common organic solvents. It has alcohol solubility with excellent compatibility and pigment-wetting characteristics. High hydroxyl content allows a high level of crosslinking. It will produce colorless films with good ultraviolet stability and is supplied as dry, free-flowing powder, offering maximum formulating convenience and flexibility.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Eastman cellulose acetate propionate (CAP-482-0.5)
Eastman™ Cellulose Acetate Propionate CAP-482-0.5 is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Eastman cellulose acetate propionate (CAP-482-20)
Eastman Cellulose Acetate Propionate CAP-482-20 has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks, overprint varnishes, and nail lacquer topcoats.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Eastman cellulose acetate propionate (CAP-504-0.2)
Eastman Cellulose Acetate Propionate CAP-504-0.2 is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 153-2 - 25% Solids in Xylene
This product is a 25% solids solution of Chlorinated Polyolefin 153-2 in Xylene. It has a 21-25 wt % chlorine content and a Gardner color value of 12-15. It is recommended as an adhesion-promoting primer for untreated polyethylene-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 343-1 - 25% Solids in Xylene
This product is a 50% solids solution of Chlorinated Polyolefin 343-1 in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 343-1 - 40% Solids in Xylene
This product is a 40% solids solution of Chlorinated Polyolefin 343-1 solids in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanised steel, phosphated steel, wood and rigid PVC.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 343-1 - 50% Solids in Xylene
This product is a 50% solids solution of Chlorinated Polyolefin 343-1 in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 343-1 - 100% Solids
Chlorinated Polyolefin 343-1 is supplied as a white powder and is soluble in both Toluene and Xylene. It has a 18-23 wt % chlorine content. This product is 100% solids and is supplied in powder form. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 343-3 - 25% Solids in Xylene
This product is a 25% solids solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. CP 343-3 has a good solvent tolerance for a wide range of solvents. The higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 343-3 - 50% Solids in Xylene
This product is a 50% solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. CP 343-3 has a good solvent tolerance for a wide range of solvents. Higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 515-2 - 40% in Aromatic 100
This product is a 40% solids solution of Chlorinated Polyolefin 515-2 in Aromatic 100 and is a liquid at room temperature. CP 515-2 is compatible with a variety of resins. Recommended as stir-in additive to promote adhesion to PP and other difficult to coat substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 515-2 - 40% Solids in Xylene
This product is a 40% solids solution of Chlorinated Polyolefin 515-2 in Xylene and is a liquid at room temperature. CP 515-2 is compatible with a variety of resins. Recommended as stir-in additive to promote adhesion to PP and other difficult to coat substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 730-1 - 100% Solids
Eastman™ Chlorinated Polyolefin 730-1 is designed to be the active component in adhesion promoter primers used to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) plastics.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 730-1 - 20% Solids in Xylene
This product is a 20% solid solution of Chlorinated Polyolefin 730-1 in Xylene. It is an efficient adhesion promoter in primers to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) substrates. It has excellent humidity and gasoline resistance and superior high temperature performance.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin - 730-1 - 20% Solids in Aromatic 100
This product is a 25% solid solution of Chlorinated Polyolefin 730-1 in Aromatic 100. It is an efficient adhesion promoter in primers to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) substrates. It has excellent humidity and gasoline resistance and superior high temperature performance.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin Adhesion Promoter - 310W - Water-Reducible
CP 310W is a water dispersion of a chlorinated polyolefin. Oil in water type emulsion containing ammonia as a neutralizing amine. The faster evaporating ammonia makes it more useful in adhesion promoting primers that are air dried prior to application of a topcoat. Recommended for adhesion to untreated polypropylene-based substrates.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Chlorinated Polyolefin Adhesion Promoter - 347W - Water-Reducible
CP 347W is a water dispersion of a chlorinated polyolefin. Oil in water-type emulsion. It contains 2-amino-2-methyl-1-propanol as the neutralizing amine which makes it more compatible with other waterborne resins and more useful as an additive. Recommended for promoting adhesion to untreated polypropylene-based substrates.
Product availability by region: Asia Pacific | Latin America | North America
|
Chlorinated Polyolefin Adhesion Promoter - 349W - Water-Reducible
CP 349W is a water dispersion of a chlorinated polyolefin. Oil in water-type emulsion. It contains 5 wt % ethylene glycol, and has 2-amino-2-methyl-1-propanol as the neutralizing amine which makes it more compatible with other waterborne resins and more useful as an additive. Recommended for promoting adhesion to untreated polypropylene-based substrates.
Product availability by region: Asia Pacific | Latin America | North America
|
1,4-Cyclohexanedimethanol (CHDM-D90)
Eastman™ CHDM-D90 is a 90/10 weight % solution of CHDM-D in water. It is a liquid at room temperature for easier handling. This symmetrical, high molecular weight cycloaliphatic glycol is used to make saturated and unsaturated polyester resins. It is commonly used as a glycol modifier for resins containing Eastman NPG™ glycol. The 10 weight % water is removed during heating of the resin reaction mixture. Good chemical, stain, humidity, and corrosion resistance is achieved when using CHDM-D90 in polyester-melamine baking enamels for appliance, general metal, and automotive coatings. It delivers good hydrolytic stability to waterborne polyester resins.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
DB Acetate (Diethylene Glycol Monobutyl Ether Acetate)
Eastman DB Acetate (Diethylene Glycol Monobutyl Ether Acetate) is a high-boiling ester widely used as a solvent in printing inks and high-bake enamels; it is also used as a coalescing aid in low pH latex paints. It is especially applicable in screen inks and as a component in coil coatings. It has also found use as a coalescing aid, a coil coating component, and in the separation of alcohols and ketones by distillation.
Product availability by region: Asia Pacific | Latin America | North America
|
DB Solvent (Diethylene Glycol Monobutyl Ether) - Stabilized
Eastman™ DB Solvent, Stabilized is a high-boiling glycol ether used in baking enamels, printing inks, textile dyeing, or as a coalescent in latex paints. This grade contains BHT antioxidant.
Product availability by region: North America
|
DE Acetate (Diethylene Glycol Monoethyl Acetate)
Eastman™ DE Acetate (diethylene glycol monoethyl ether acetate) is a colorless liquid, soluble in water and miscible in most organic solvents. It is primarily used as a coalescing aid in paints and as a solvent in inks. With broad resin solubility, it is suitable for use in coil coatings.
Product availability by region: Asia Pacific | Latin America | North America
|
Diisobutyl Ketone (DIBK)
Eastman™ DIBK (Diisobutyl Ketone) is a slow-evaporating, low-density solvent that has good activity for many synthetic resins. It is useful as a retarder solvent to improve flow and minimize humidity blushing.
Product availability by region: Latin America | North America
|
Dimethyl 1,4-Cyclohexanedicarboxylate (DMCD)
Eastman™ DMCD is a low-melting, cycloaliphatic diester used for the synthesis of polyester resins, polyamides, alkyds, and plasticizers in a wide variety of coatings applications. It is also used in unsaturated polyester resin gel coats for fiberglass-reinforced plastics.
Product availability by region: Europe, Middle East, & Africa | Latin America | North America
|
|
|
Results per page: 25
50
100
500
all
|
|