Eastman
PrintBookmark and Share
Typical Physical Properties
EASTOTAC resins

Some products contain physical properties that are not displayed in the columns below. To locate the information needed, please choose the product link below. The properties may be found on the datasheet, SDS or sales specification.

Eastotac E-Series (Economic grade)
ProductsSoftening PointaColor, GardnerbCloud PointcMolecular WeightdData
Sheet
SDS
DACPMMAPMnMwMw/MnMz
ASTM D 6090ASTM D 1544
Eastotac™ H-100E100 °C561 °C77 °C45010502.32450
Eastotac™ H-115E115 °C570 °C80 °C45010502.32600
Eastotac™ H-130E130 °C572 °C78 °C50010502.12350
a - ASTM D6090 allows a heating rate of 1.0 to 2.5°C/Min. Eastman uses a heating rate of 1.4°C/Min. for this method.
b - 50% resins solids in toluene
c - MMAP: cloud point measured in a 1:2 mixture of methylcyclohexane and aniline; DACP: cloud point measured in a 1:1 mixture of xylene and 4-hydroxy-4-methyl-2-pentanone; For more information see "Hydrocarbon Spectrum" brochure WA-86
d - Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards
Eastotac L-Series (Light grade)
ProductsRing and Ball Softening PointColor, GardneraYellowness IndexbCloud PointcMolecular WeightdData
Sheet
SDS
2 cm cell5 cm cellDACPMMAPMnMwMw/MnMz
ASTM E 28ASTM D 1544ASTM D 6166ASTM E 313ASTM E 313
Eastotac™ C-100L
(Asia/Pacific Region only)
100 °C-<191857 °C81 °C55011002.01900
Eastotac™ C-115L
(Asia/Pacific Region only)
115 °C-<191861 °C80 °C55011002.02250
Eastotac™ H-100L-<1---65 °C78 °C45010002.22300
Eastotac™ H-115L-<1-91875 °C82 °C45010002.22400
Eastotac™ H-130L-<1-91877 °C83 °C50010502.12350
a - 50% resins solids in toluene
b - 50% resins solids in toluene
c - MMAP: cloud point measured in a 1:2 mixture of methylcyclohexane and aniline; DACP: cloud point measured in a 1:1 mixture of xylene and 4-hydroxy-4-methyl-2-pentanone; For more information see "Hydrocarbon Spectrum" brochure WA-86
d - Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards
Eastotac R-Series (Regular grade)
ProductsRing and Ball Softening PointColor, GardneraYellowness IndexbCloud PointcMolecular WeightdData
Sheet
SDS
1 cm cellDACPMMAPMnMwMw/MnMz
ASTM E 28ASTM D 1544ASTM D 6166ASTM E 313
Eastotac™ C-100R
(Asia/Pacific Region only)
100 °C-1.51156 °C78 °C55011002.02100
Eastotac™ C-115R
(Asia/Pacific Region only)
115 °C-1.51160 °C78 °C55011502.12300
Eastotac™ H-100R-1.5-1168 °C79 °C45010502.32550
Eastotac™ H-115R-1.5-1176 °C82 °C45010502.32450
Eastotac™ H-130R-1.5-1170 °C81 °C50010502.12400
Eastotac™ H-142R-1.5-1174 °C82 °C50010502.12300
a - 50% resins solids in toluene
b - 50% resins solids in toluene
c - MMAP: cloud point measured in a 1:2 mixture of methylcyclohexane and aniline; DACP: cloud point measured in a 1:1 mixture of xylene and 4-hydroxy-4-methyl-2-pentanone; For more information see "Hydrocarbon Spectrum" brochure WA-86
d - Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards
Eastotac W-Series (White grade)
ProductsRing and Ball Softening PointColor, GardneraYellowness IndexbCloud PointcMolecular WeightdData
Sheet
SDS
2 cm cell5 cm cellDACPMMAPMnMwMw/MnMz
ASTM E 28ASTM D 1544ASTM D 6166ASTM E 313ASTM E 313
Eastotac™ C-100W
(Asia/Pacific Region only)
100 °C-<14864 °C83 °C55010001.81900
Eastotac™ C-115W
(Asia/Pacific Region only)
115 °C-<14868 °C85 °C55010501.92000
Eastotac™ H-100W-<1-4869 °C81 °C45010002.22150
Eastotac™ H-115W-<1-4868 °C80 °C4509502.12100
Eastotac™ H-130W-<1-4876 °C83 °C50010002.02200
Eastotac™ H-142W-<1-4876 °C85 °C5009501.92000
a - 50% resins solids in toluene
b - 50% resins solids in toluene
c - MMAP: cloud point measured in a 1:2 mixture of methylcyclohexane and aniline; DACP: cloud point measured in a 1:1 mixture of xylene and 4-hydroxy-4-methyl-2-pentanone; For more information see "Hydrocarbon Spectrum" brochure WA-86
d - Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards
© 2017 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.