Eastman

Wax ingredients

Compounds based on petroleum waxes are used for a wide variety of moisture or grease barrier applications where or when a material that is pliable, moldable, chemically inert, and processable at low temperatures is required. Wax compounds are used extensively in food packaging applications as a coating or saturant for paper or cardboard. Modified wax is also an essential component for investment casting compounds used in metal molding via the "lost wax" process. Waxes are used in wire and fiber-optic cables to provide waterproofing and flexibility. Wax compounds find use in numerous specialty applications as diverse as dental molding, depilatory compounds, candles, and hard surface polishes.

For most of these applications petroleum, wax alone is not satisfactory due to brittleness, lack of adhesion, low solvent resistance, or insufficient hardness. Using additives, including the following products from Eastman, compounded with wax can impart the desired properties to the material.

Filter products by regional availability: 
128 Results Found - Showing 1 - 50
Dresinate 91 Rosin Soap 
Dresinate™ 91 rosin soap is a fluid, high solids, aqueous solution of potassium soap of tall oil rosin. Designed for low viscosity, low water content soap solution applications. It is used as an emulsifier ingredient in solvent cleaners and soluble oils for metal cleaning.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Dresinate TX Tall Oil Soap 
Dresinate™ TX tall oil soap is a free flowing solid, fully saponified sodium soap of tall oil. It is designed mainly as an emulsifier promoting detergent or cleaning activity, particularly in highly built industrial metal cleaners.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Dymerex Polymerized Rosin 
A pale, acidic, thermoplastic, high softening point resin, composed of dimeric acids derived from rosin. High viscosity (molten and in solution) and excellent oxidation resistance. Reacts readily with polyalcohols or hydrated lime to yield high melting derivatives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1003 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 300 mPa·s at 190°C.


Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1015 Amorphous Polyolefin 
Eastoflex™ E1015 is a copolymer of propylene and ethylene, having a melt viscosity of 1,500 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1015 PL-1 Amorphous Polyolefin 
Eastoflex™ E1015PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder, having a melt viscosity of 1,500 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1016 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 1600 mPa·s at 190°C.

Product availability by region: North America

Eastoflex E1016PL-1 Amorphous Polyolefin 
A copolymer of propylene and ethylene with a melt viscosity of 1,600 mPa•s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1045 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 4,500 mPa·s at 190°C.

Product availability by region: North America

Eastoflex E1045PL Amorphous Polyolefin 
A copolymer of propylene and ethylene with a melt viscosity of 4,500 mPa•s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1060 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 6,000 mPa·s at 190°C.

Product availability by region: North America

Eastoflex E1060PL Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 5,700 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1060PL-1 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 6,000 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1175 Amorphous Polyolefin 
Eastoflex™ E1175 is a copolymer of propylene and ethylene, having a melt viscosity of 17,500 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1175PL-1 Amorphous Polyolefin 
Eastoflex™ E1175PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder, having a melt viscosity of 17,500 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E1200 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 20,000 mPa·s at 190°C.

Product availability by region: North America

Eastoflex E1200PL Amorphous Polyolefin 
A low molecular weight copolymer of propylene and ethylene.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex E2030 Amorphous Polyolefin 
A copolymer of propylene and ethylene having a melt viscosity of 3,000 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1014 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 1,350 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1018 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer of with a melt viscosity of 1,800 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1018PL-1 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 1,800 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex M1020 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 2,000 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1020PL Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 2,000 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex M1020PL-1 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 2,000 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex M1025 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 2,500 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1030 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 3,000 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1030PL Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 3,000 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex M1030PL-1 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 3,000 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex M1058 Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a meltl viscosity of 5,800 mPa·s at 190°C.

Product availability by region: North America

Eastoflex M1058PL Amorphous Polyolefin 
A mixture of propylene homopolymer and ethylene copolymer having a melt viscosity of 5,800 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex P1010 Amorphous Polyolefin 
A propylene homopolymer having a melt viscosity of 1,000 mPa·s at 190°C.

Product availability by region: North America

Eastoflex P1010PL Amorphous Polyolefin 
A propylene homopolymer having a melt viscosity of 1,000 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastoflex P1023 Amorphous Polyolefin 
A propylene homopolymer having a melt viscosity of 2,300 mPa·s at 190°C.

Product availability by region: North America

Eastoflex P1023PL Amorphous Polyolefin 
A propylene homopolymer having a melt viscosity of 2,300 mPa·s at 190°C.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac C-100L Resin 
Eastotac™ C-100L Resin has a softening point of 100°C and a molten Gardner color of 2. Component of hot-melt adhesives.

Product availability by region: Asia Pacific

Eastotac C-100R Resin 
Eastotac™ C-100R Resin has a softening point of 100°C and a molten Gardner color of 4. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Eastotac C-100W Resin 
Eastotac™ C-100W Resin has a softening point of 100°C and a molten Gardner color of <1. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Eastotac C-100XF 
Eastotac™ C-100XF Resin is a tackifier resin with a ring and ball softening point of 100°C and a molten Gardner color of <1.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Eastotac C-115R Resin 
Eastotac™ C-115R Resin has a softening point of 115°C and a molten Gardner color of 4. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Eastotac C-115W Resin 
Eastotac™ C-115W Resin has a softening point of 115°C and a molten Gardner color of <1. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Eastotac H-100E Resin 
Eastotac™ H-100E is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of 8. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-100L Resin 
Eastotac™ H-100L is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of 2. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-100R Resin 
Eastotac™ H-100R is a hydrogenated hydrocarbon resin, having a softening point of 100°C and a molten Gardner color of 4. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-100W Resin 
Eastotac™ H-100W is a hydrogenated hydrocarbon resin, having a softening point of 108°C and a Gardner color (molten state of <1. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-115E Resin 
Eastotac™ H-115E is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 8. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-115L Resin 
Eastotac™ H-115L is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 2. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-115R Resin 
Eastotac™ H-115R is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of 4. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-115W Resin 
Eastotac™ H-115W is a hydrogenated hydrocarbon resin, having a softening point of 115°C and a molten Gardner color of <1. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-130E Resin 
Eastotac™ H-130E is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of 8. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastotac H-130L Resin 
Eastotac™ H-130L is a hydrogenated hydrocarbon resin, having a softening point of 130°C and a molten Gardner color of 2. Component of hot-melt adhesives.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

1 2 3
Results per page: 25  50  100  500  all
© 2020 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.