Eastman
Typical Physical Properties
Polypropylene-Propylene-Ethylene Copolymer Mixtures

Some products contain physical properties that are not displayed in the columns below. To locate the information needed, please choose the product link below. The properties may be found on the datasheet, SDS or sales specification.

Polypropylene-Propylene-Ethylene Copolymer Mixtures
ProductsPhysical FormaViscosity, BrookfieldbRing and Ball Softening PointcGlass Transition Temperature (Tg)Penetration HardnessData
Sheet
SDS
ASTM D 3236ASTM E 28ASTM D 3418ASTM D 5
Eastoflex M1014 Amorphous PolyolefinMolten/Solid 1350 cP155 °C
(311 °F)
-13 °C
(9 °F)
20 dmm
Eastoflex M1018 Amorphous PolyolefinMolten/Solid 1800 cP155 °C
(311 °F)
-15 °C
(5 °F)
25 dmm
Eastoflex M1018PL-1 Amorphous PolyolefinPellets 1800 cP155 °C
(311 °F)
-15 °C
(5 °F)
25 dmm
Eastoflex M1020 Amorphous PolyolefinMolten/Solid 2000 cP150 °C
(302 °F)
-21 °C
(-6 °F)
35 dmm
Eastoflex M1020PL Amorphous PolyolefinPellets 2000 cP153 °C-21 °C35 dmm
Eastoflex M1020PL-1 Amorphous PolyolefinPellets 2000 cP150 °C
(302 °F)
-21 °C
(-6 °F)
35 dmm
Eastoflex M1025 Amorphous PolyolefinMolten/Solid 2500 cP155 °C
(311 °F)
-14 °C
(7 °F)
20 dmm
Eastoflex M1030 Amorphous PolyolefinMolten/Solid 3000 cP155 °C
(311 °F)
-12 °C
(10 °F)
20 dmm
Eastoflex M1030PL Amorphous PolyolefinPellets 3000 cP155 °C
(311 °F)
-12 °C
(10 °F)
20 dmm
Eastoflex M1030PL-1 Amorphous PolyolefinPellets 3000 cP155 °C
(311 °F)
-12 °C
(10 °F)
20 dmm
Eastoflex M1058 Amorphous PolyolefinMolten/Solid 5800 cP155 °C
(311 °F)
-15 °C
(5 °F)
20 dmm
Eastoflex M1058PL Amorphous PolyolefinPellets 5800 cP155 °C
(311 °F)
-15 °C
(5 °F)
20 dmm
a - Molten available in tank trucks or railcars. Solid may be available in cylinders or drums.
b - Viscosity, Brookfield @ 190°C
c - RBSP of pellet coating on formulas ending in “PL” is 163 deg C. Pellet coating typically 1.5% to 2% by weight.
© 2018 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.