Eastman
Typical Physical Properties
Propylene-Ethylene Copolymers

Some products contain physical properties that are not displayed in the columns below. To locate the information needed, please choose the product link below. The properties may be found on the datasheet, SDS or sales specification.

Propylene-Ethylene Copolymers
ProductsPhysical FormaViscosity, BrookfieldbRing and Ball Softening PointcGlass Transition Temperature (Tg)Penetration HardnessData
Sheet
SDS
ASTM D 3236ASTM E 28ASTM D 3418ASTM D 5
Eastoflex E1003 Amorphous PolyolefinMolten/Solid 300 cP120 °C
(248 °F)
-30 °C
(-22 °F)
100 dmm
Eastoflex E1015 Amorphous PolyolefinMolten/solid 1500 cP130 °C
(266 °F)
-38 °C
(-36 °F)
20 dmm
Eastoflex E1015 PL-1 Amorphous PolyolefinPellets 1500 cP130 °C
(266 °F)
-38 °C
(-36 °F)
20 dmm
Eastoflex E1016 Amorphous PolyolefinMolten/Solid 1600 cP135 °C
(275 °F)
-25 °C
(-13 °F)
50 dmm
Eastoflex E1016PL-1 Amorphous PolyolefinPellets 1600 cP135 °C
(275 °F)
-25 °C
(-13 °F)
50 dmm
Eastoflex E1045 Amorphous PolyolefinMolten/Solid 4500 cP135 °C
(275 °F)
-22 °C
(-8 °F)
40 dmm
Eastoflex E1045PL Amorphous PolyolefinPellets 4500 cP140 °C
(284 °F)
-22 °C
(-8 °F)
40 dmm
Eastoflex E1060 Amorphous PolyolefinMolten/Solid 6000 cP135 °C
(275 °F)
-20 °C
(-4 °F)
40 dmm
Eastoflex E1060PL Amorphous PolyolefinPellets 5700 cP140 °C
(284 °F)
-20 °C
(-4 °F)
35 dmm
Eastoflex E1060PL-1 Amorphous PolyolefinPellets 6000 cP135 °C
(275 °F)
-20 °C
(-4 °F)
35 dmm
Eastoflex E1175 Amorphous PolyolefinMolten/solid 17500 cP125 °C
(257 °F)
-38 °C
(-36 °F)
25 dmm
Eastoflex E1175PL-1 Amorphous PolyolefinPellets 17500 cP125 °C
(257 °F)
-38 °C
(-36 °F)
25 dmm
Eastoflex E1200 Amorphous PolyolefinMolten/Solid 20000 cP135 °C
(275 °F)
-22 °C
(-8 °F)
25 dmm
Eastoflex E1200PL Amorphous PolyolefinPellets 17000 cP143 °C
(289 °F)
-22 °C
(-8 °F)
25 dmm
Eastoflex E2030 Amorphous PolyolefinMolten/Solid 3000 cP135 °C
(275 °F)
-23 °C
(-9 °F)
50 dmm
a - Molten available in tank trucks or railcars. Solid may be available in cylinders or drums.
b - Viscosity, Brookfield @ 190°C
c - RBSP of pellet coating on formulas ending in “PL” is 163 deg C. Pellet coating typically 1.5% to 2% by weight.
© 2018 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.