Eastman
Typical Physical Properties
Propylene Homopolymers

Some products contain physical properties that are not displayed in the columns below. To locate the information needed, please choose the product link below. The properties may be found on the datasheet, SDS or sales specification.

Propylene Homopolymers
ProductsPhysical FormaViscosity, BrookfieldbRing and Ball Softening PointcGlass Transition Temperature (Tg)Penetration HardnessData
Sheet
SDS
ASTM D 3236ASTM E 28ASTM D 3418ASTM D 5
Eastoflex P1010 Amorphous PolyolefinMolten/Solid 1000 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
Eastoflex P1010PL Amorphous PolyolefinPellets 1000 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
Eastoflex P1023 Amorphous PolyolefinMolten/Solid 2300 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
Eastoflex P1023PL Amorphous PolyolefinPellets 2300 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
a - Molten available in tank trucks or railcars. Solid may be available in cylinders or drums.
b - Viscosity, Brookfield @ 190°C
c - RBSP of pellet coating on formulas ending in “PL” is 163 deg C. Pellet coating typically 1.5% to 2% by weight.
© 2018 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.