Eastman
Typical Physical Properties
Amorphous Polyolefins

Some products contain physical properties that are not displayed in the columns below. To locate the information needed, please choose the product link below. The properties may be found on the datasheet, SDS or sales specification.

Polypropylene-Propylene-Ethylene Copolymer Mixtures
ProductsPhysical FormaViscosity, BrookfieldbRing and Ball Softening PointcGlass Transition Temperature (Tg)Penetration HardnessData
Sheet
SDS
ASTM D 3236ASTM E 28ASTM D 3418ASTM D 5
Eastoflex M1014 Amorphous PolyolefinMolten/Solid 1350 cP155 °C
(311 °F)
-13 °C
(9 °F)
20 dmm
Eastoflex M1018 Amorphous PolyolefinMolten/Solid 1800 cP155 °C
(311 °F)
-15 °C
(5 °F)
25 dmm
Eastoflex M1018PL-1 Amorphous PolyolefinPellets 1800 cP155 °C
(311 °F)
-15 °C
(5 °F)
25 dmm
Eastoflex M1020 Amorphous PolyolefinMolten/Solid 2000 cP150 °C
(302 °F)
-21 °C
(-6 °F)
35 dmm
Eastoflex M1020PL Amorphous PolyolefinPellets 2000 cP153 °C-21 °C35 dmm
Eastoflex M1020PL-1 Amorphous PolyolefinPellets 2000 cP150 °C
(302 °F)
-21 °C
(-6 °F)
35 dmm
Eastoflex M1025 Amorphous PolyolefinMolten/Solid 2500 cP155 °C
(311 °F)
-14 °C
(7 °F)
20 dmm
Eastoflex M1030 Amorphous PolyolefinMolten/Solid 3000 cP155 °C
(311 °F)
-12 °C
(10 °F)
20 dmm
Eastoflex M1030PL Amorphous PolyolefinPellets 3000 cP155 °C
(311 °F)
-12 °C
(10 °F)
20 dmm
Eastoflex M1030PL-1 Amorphous PolyolefinPellets 3000 cP155 °C
(311 °F)
-12 °C
(10 °F)
20 dmm
Eastoflex M1058 Amorphous PolyolefinMolten/Solid 5800 cP155 °C
(311 °F)
-15 °C
(5 °F)
20 dmm
Eastoflex M1058PL Amorphous PolyolefinPellets 5800 cP155 °C
(311 °F)
-15 °C
(5 °F)
20 dmm
a - Molten available in tank trucks or railcars. Solid may be available in cylinders or drums.
b - Viscosity, Brookfield @ 190°C
c - RBSP of pellet coating on formulas ending in “PL” is 163 deg C. Pellet coating typically 1.5% to 2% by weight.
Propylene Homopolymers
ProductsPhysical FormaViscosity, BrookfieldbRing and Ball Softening PointcGlass Transition Temperature (Tg)Penetration HardnessData
Sheet
SDS
ASTM D 3236ASTM E 28ASTM D 3418ASTM D 5
Eastoflex P1010 Amorphous PolyolefinMolten/Solid 1000 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
Eastoflex P1010PL Amorphous PolyolefinPellets 1000 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
Eastoflex P1023 Amorphous PolyolefinMolten/Solid 2300 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
Eastoflex P1023PL Amorphous PolyolefinPellets 2300 cP155 °C
(311 °F)
-10 °C
(14 °F)
18 dmm
a - Molten available in tank trucks or railcars. Solid may be available in cylinders or drums.
b - Viscosity, Brookfield @ 190°C
c - RBSP of pellet coating on formulas ending in “PL” is 163 deg C. Pellet coating typically 1.5% to 2% by weight.
Propylene-Ethylene Copolymers
ProductsPhysical FormaViscosity, BrookfieldbRing and Ball Softening PointcGlass Transition Temperature (Tg)Penetration HardnessData
Sheet
SDS
ASTM D 3236ASTM E 28ASTM D 3418ASTM D 5
Eastoflex E1003 Amorphous PolyolefinMolten/Solid 300 cP120 °C
(248 °F)
-30 °C
(-22 °F)
100 dmm
Eastoflex E1015 Amorphous PolyolefinMolten/solid 1500 cP130 °C
(266 °F)
-38 °C
(-36 °F)
20 dmm
Eastoflex E1015 PL-1 Amorphous PolyolefinPellets 1500 cP130 °C
(266 °F)
-38 °C
(-36 °F)
20 dmm
Eastoflex E1016 Amorphous PolyolefinMolten/Solid 1600 cP135 °C
(275 °F)
-25 °C
(-13 °F)
50 dmm
Eastoflex E1016PL-1 Amorphous PolyolefinPellets 1600 cP135 °C
(275 °F)
-25 °C
(-13 °F)
50 dmm
Eastoflex E1045 Amorphous PolyolefinMolten/Solid 4500 cP135 °C
(275 °F)
-22 °C
(-8 °F)
40 dmm
Eastoflex E1045PL Amorphous PolyolefinPellets 4500 cP140 °C
(284 °F)
-22 °C
(-8 °F)
40 dmm
Eastoflex E1060 Amorphous PolyolefinMolten/Solid 6000 cP135 °C
(275 °F)
-20 °C
(-4 °F)
40 dmm
Eastoflex E1060PL Amorphous PolyolefinPellets 5700 cP140 °C
(284 °F)
-20 °C
(-4 °F)
35 dmm
Eastoflex E1060PL-1 Amorphous PolyolefinPellets 6000 cP135 °C
(275 °F)
-20 °C
(-4 °F)
35 dmm
Eastoflex E1175 Amorphous PolyolefinMolten/solid 17500 cP125 °C
(257 °F)
-38 °C
(-36 °F)
25 dmm
Eastoflex E1175PL-1 Amorphous PolyolefinPellets 17500 cP125 °C
(257 °F)
-38 °C
(-36 °F)
25 dmm
Eastoflex E1200 Amorphous PolyolefinMolten/Solid 20000 cP135 °C
(275 °F)
-22 °C
(-8 °F)
25 dmm
Eastoflex E1200PL Amorphous PolyolefinPellets 17000 cP143 °C
(289 °F)
-22 °C
(-8 °F)
25 dmm
Eastoflex E2030 Amorphous PolyolefinMolten/Solid 3000 cP135 °C
(275 °F)
-23 °C
(-9 °F)
50 dmm
a - Molten available in tank trucks or railcars. Solid may be available in cylinders or drums.
b - Viscosity, Brookfield @ 190°C
c - RBSP of pellet coating on formulas ending in “PL” is 163 deg C. Pellet coating typically 1.5% to 2% by weight.
© 2018 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.