Eastman

Product List

Filter products by regional availability: 
15 Results Found - Showing 1 - 15
Cyphrex - 10001 
Cyphrex™ 10001 microfiber is a round 2.5 micron diameter by 1.5 mm length, sub-denier PET fiber provided in wet pulp form.


Cyphrex - 10002 
Cyphrex™ 10002 microfiber is a round 4.5 micron diameter by 1.5 mm length, sub-denier PET fiber provided in wet pulp form.


Cyphrex - 10003 
Cyphrex™ 10003 microfiber is a round 4.5 micron diameter by 3.0 mm length, sub-denier PET fiber provided in wet pulp form.


Cyphrex - 10101 
Cyphrex™ 10101 is a wet pulp polyester microfiber for use in wet laid nonwovens. Cyphrex™ 10101 is a less than 0.4 denier fiber with a flat or ribbon shaped cross section and a nominal width of 18 microns, a nominal thickness of 2.5 microns, and a cut length of 1.5mm.


Eastapak Polymer 9921 
Eastapak™ Polymer 9921 is an 0.80 ltV (dL/g) copolymer PET that has proven itself as an exceptional, cost-effective option that continues to surpass expectations for quality, efficiency and convenience in a wide array applications.


Eastar Copolyester EN001 
Eastar™ EN001 Copolyester is a thermoplastic polyester copolymer that has been modified with 1,4-cyclohexanedimethanol(CHDM) to slow the crystallization rate. It is the preferred general-purpose crystallizable PET for thermoforming. It is regulated for use in food packaging applications.


Eastar Copolyester EN058 - Natural 
Eastar™ EN058 Copolyester is a copolymer PET. It is crystallized and has an lntrinsic Viscosity of 0.58. Eastar™ EN058 copolyester is tailored to meet the need of the injection-molded cosmetics and personal care market. Easter™ EN058 is crystallized to allow faster, high-temperature drying. Its high-flow characteristics allow faster cycle times.

Product availability by region: Asia Pacific | Europe, Middle East & Africa | North America

Eastar Copolyester EN067 
Eastar™ Copolyester EN067 is a copolymer PET with good color. This product is supplied as a crystalline pellet that has improved flowability characteristics. Due to slower crystallization kinetics, this product is capable of producing a part free of crystalline haze upon injection molding. This product is tailored for the injection-molded cosmetics and personal care market.

Product availability by region: Asia Pacific | Europe, Middle East & Africa | Latin America | North America

Eastar Copolyester EN076 
Eastar™ Copolyester EN076 is recommended for the thick-walled containers that are prevalent in the cosmetics and personal care markets. This copolyester offers good processability with the benefits of glass such as high clarity, brightness, and good color.

Product availability by region: Asia Pacific | Europe, Middle East & Africa | Latin America | North America

Eastar Copolyester MN021 - Natural 
Meets ISO 10993 and/or USP Class VI biocompatibility requirement
Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release.



Eastar Copolyester MN058 
Meets ISO 10993 and/or USP Class VI biocompatibility requirement
Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release.


Product availability by region: Asia Pacific | Europe, Middle East & Africa | North America

Eastar Copolyester MN059 - Natural 
Eastar™ Copolyester MN059 Natural is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates.


Eastar Polyester EN052 
Eastar™ Polyester EN052 is a thermoplastic condensation homopolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.


Eastar Polyester MN052 
Meets ISO 10993 and/or USP Class VI biocompatibility requirement
Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics.


Product availability by region: Asia Pacific | North America

Polyester F61HC 
F61HC is a low IV (0.59 dL/g) homopolymer PET that is readily crystallized by both thermal and mechanical processes.


© 2018 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.