Eastman

​Lighting

UV protection, high impact strength, and superior light transmission are just a few of the benefits Eastman’s lightweight plastics provide to lighting component manufacturers.

Filter products by regional availability: 
35 Results Found - Showing 1 - 35
Cellulose Acetate Propionate - CAP-482-0.5 
Eastman™ Cellulose Acetate Propionate CAP-482-0.5 is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-482-20 
Eastman Cellulose Acetate Propionate CAP-482-20 has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks, overprint varnishes, and nail lacquer topcoats.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-504-0.2 
Eastman Cellulose Acetate Propionate CAP-504-0.2 is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

1,4-Cyclohexanedimethanol (CHDM-D90) 
Eastman CHDM-D90 is a 90/10 weight % solution of CHDM-D in water. It is a liquid at room temperature for easier handling. This symmetrical, high molecular weight cycloaliphatic glycol is used to make saturated and unsaturated polyester resins. It is commonly used as a glycol modifier for resins containing Eastman NPG™ glycol. The 10 weight % water is removed during heating of the resin reaction mixture. Good chemical, stain, humidity, and corrosion resistance is achieved when using CHDM-D90 in polyester-melamine baking enamels for appliance, general metal, and automotive coatings. It delivers good hydrolytic stability to waterborne polyester resins.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

DuraStar Polymer DS1110UVI - Natural 
DuraStar™ Polymer DS1110UVI Natural polymer contains an ultraviolet light stabilization package. It is recommended for indoor applications requiring enhanced color stability upon extended exposure to fluorescent light.

Product availability by region: Europe, Middle East, & Africa | North America

DuraStar Polymer DS1910HF - Natural 
DuraStar™ Polymer DS1910HF, Natural polymer contains a mold release. It has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. Easy to process, it flows readily, fills intricate molds, and is well suited for thick-wall applications.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastar DN010 Copolyester 
Eastar™ DN010 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN010 contains no mold release.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | North America

Eastar DN011 Copolyester 
Eastar™ DN011 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN011 contains a mold release.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastar DN114 Copolyester - Natural 
Eastar™ DN114 contains an ultraviolet light inhibitor and a mold release.



Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastman DN500 Copolyester 
Eastman DN500 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, DN500 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | North America

Eastman DN501 Copolyester 
Eastman DN501 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, DN501 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Under existing United States Food and Drug Administration (FDA) regulations, DN501 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. The product is certified to ANSI/NSF Standard 51.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | North America

Spectar 14471 Copolyester 
Eastman Spectar™ 14471 copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar 14471 is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | North America

Spectar Clear Copolyester 
Eastman Spectar™ Clear copolyester offers the thermoformability and ease of fabrication of Eastman Spectar™ copolyester along with significantly improved clarity and high notch impact strength.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Spectar Frost Copolyester 
Eastman Spectar Frost™ copolyester has a matte finish with outstanding durability and toughness that enables displays and fixtures to use thinner gauge sheet than other common materials. Eastman Spectar Frost™ retains its matte finish when thermoformed, hot bent and after other fabrication processes.

Product availability by region: Europe, Middle East, & Africa | North America

Spectar Stratus Copolyester 
Spectar Stratus copolyester was formulated specifically for the lighting market. Spectar Stratus brings your projects to light with excellent diffusion and high light transmission and superb processability with a low thermoforming temperature, no need to pre-dry before thermoforming, ease of cutting, and cold bending capability.

Product availability by region: Europe, Middle East, & Africa | Latin America | North America

Spectar UV Copolyester 
Eastman Spectar UV™ copolyester is a versatile copolyester that extrudes into plastic sheet that is sparkling clear, tough, chemically resistant, odor free, easy to work with, and affordable. It is easy to fabricate, allowing greater design freedom. It can be laser cut, routed, welded, drilled, die-punched, bent hot or cold, or joined by screws, rivets, or bolts.

Product availability by region: Asia Pacific | Latin America | North America

Tenite Butyrate 485E3720013 - Clear - Trsp 
Tenite™ Cellulose Acetate Butyrate 485-13 contains an odor mask and an ultra-violet inhibitor (UVI). It has a plasticizer level of 13%.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tenite Butyrate 575E3720010 - Clear - Trsp 
Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 575-10 has a 10% plasticizer level and an odor mask.

Product availability by region: Asia Pacific | North America

Tenite Butyrate 576E3720010 - Clear - Trsp 
Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 576-10 has a 10% plasticizer level and an odor mask.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tenite Propionate 375E4000012 - Clear - Trsp 
Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 375-12 has a plasticizer level of 12%.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tenite Propionate 376E4000012 - Clear - Trsp 
Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 376-12 has a 12% plasticizer level and an ultraviolet inhibitor.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester GX100 
Tritan GX100 can be found in a variety of heavy-gauge sheet end uses, including sneeze guards, separation barriers, outdoor signs, displays/in-store fixtures, and heat-sensitive applications in hospitals, office buildings, schools, and retailers. It has glasslike clarity and is free of materials of concern, including BPA.

Product availability by region: Asia Pacific | North America

Tritan Copolyester TX1000 
Eastman Tritan TX1000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX1001 
Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX1501HF 
Eastman Tritan™ copolyester TX1501HF is a high flow grade of Eastman Tritan™. Eastman Tritan™ copolyester TX1501HF has viscosity reductions of 40-50% relative to Eastman Tritan™ copolyester TX1001.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX1800 
Eastman Tritan™ TX 1800 copolyester is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX2001 
Eastman Tritan(tm) TX2001 is an amorphous copolyester with excellent appearance and clarity. Tritan TX2001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Renew Copolyester TX1000-25 
Eastman Tritan™ Renew TX1000-25 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan™ Renew TX1000-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America

Tritan Renew Copolyester TX1000-50 
Eastman Tritan™ Renew TX1000-50 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Eastman Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1000-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1000-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America

Tritan Renew Copolyester TX1001-25 
Eastman Tritan™ Renew TX1001-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX1001-25 contains a mold release derived from vegetable based sources. This product's most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1001-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1001-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX1001-50 
Eastman Tritan™ Renew TX1001-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX1001-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1001-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1001-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX1501HF-25 
Eastman Tritan™ Renew TX1501HF-25 is a high flow grade of Eastman Tritan. Tritan Renew TX1501HF-25 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1001, as well as Tritan Renew TX1001-25 and TX1001-50. Eastman Tritan Renew TX1501HF-25 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TX1501HF-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1501HF-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX1501HF-50 
Eastman Tritan™ Renew TX1501HF-50 is a high flow grade of Eastman Tritan. Tritan Renew TX1501HF-50 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1001, as well as Tritan Renew TX1001-25 and TX1001-50. Tritan Renew TX1501HF-50 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TX1501HF-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1501HF-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX2001-25 
Eastman Tritan™ Renew TX2001-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX2001-25 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX2001-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX2001-50 
Eastman Tritan™ Renew TX2001-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX2001-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX2001-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

1
Results per page: 25  50  100  500  all
© 2022 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.