EN
Chlorinated Polyolefin - 343-3 - 25% Solids in Xylene

This product is a 25% solids solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. CP 343-3 has a good solvent tolerance for a wide range of solvents. The higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.

1,4-Diisopropylbenzene (DIPB)

Eastman™ 1,4-Diisopropylbenzene is a chemical intermediate for the preparation of stabilizers, polymers, synthetic lubricants, hydroperoxides, and a variety of other products.

Meta-Diisopropylbenzene (DIPB) (1,3-Diisopropylbenzene)

Eastman™ meta-DIPB (1,3-Diisopropylbenzene) is a chemical intermediate for the preparation of stabilizers, polymers, synthetic lubricants, hydroperoxides, and a variety of other products.

Chlorinated Polyolefin - 343-1 - 100% Solids

Chlorinated Polyolefin 343-1 is supplied as a white powder and is soluble in both Toluene and Xylene. It has a 18-23 wt % chlorine content. This product is 100% solids and is supplied in powder form. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.

Chlorinated Polyolefin - 343-3 - 50% Solids in Xylene

This product is a 50% solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. CP 343-3 has a good solvent tolerance for a wide range of solvents. Higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.

Chlorinated Polyolefin - 153-2 - 25% Solids in Xylene

This product is a 25% solids solution of Chlorinated Polyolefin 153-2 in Xylene. It has a 21-25 wt % chlorine content and a Gardner color value of 12-15. It is recommended as an adhesion-promoting primer for untreated polyethylene-based substrates.

Chlorinated Polyolefin - 343-1 - 25% Solids in Xylene

This product is a 50% solids solution of Chlorinated Polyolefin 343-1 in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.

Chlorinated Polyolefin - 343-1 - 50% Solids in Xylene

This product is a 50% solids solution of Chlorinated Polyolefin 343-1 in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.

Chlorinated Polyolefin - 515-2 - 40% Solids in Xylene

This product is a 40% solids solution of Chlorinated Polyolefin 515-2 in Xylene and is a liquid at room temperature. CP 515-2 is compatible with a variety of resins. Recommended as stir-in additive to promote adhesion to PP and other difficult to coat substrates.

Chlorinated Polyolefin - 515-2 - 40% in Aromatic 100

This product is a 40% solids solution of Chlorinated Polyolefin 515-2 in Aromatic 100 and is a liquid at room temperature. CP 515-2 is compatible with a variety of resins. Recommended as stir-in additive to promote adhesion to PP and other difficult to coat substrates.

Chlorinated Polyolefin - 343-1 - 40% Solids in Xylene

This product is a 40% solids solution of Chlorinated Polyolefin 343-1 solids in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanised steel, phosphated steel, wood and rigid PVC.

Chlorinated Polyolefin Adhesion Promoter - 310W - Water-Reducible

CP 310W is a water dispersion of a chlorinated polyolefin. Oil in water type emulsion containing ammonia as a neutralizing amine. The faster evaporating ammonia makes it more useful in adhesion promoting primers that are air dried prior to application of a topcoat. Recommended for adhesion to untreated polypropylene-based substrates.

Chlorinated Polyolefin Adhesion Promoter - 349W - Water-Reducible

CP 349W is a water dispersion of a chlorinated polyolefin. Oil in water-type emulsion. It contains 5 wt % ethylene glycol, and has 2-amino-2-methyl-1-propanol as the neutralizing amine which makes it more compatible with other waterborne resins and more useful as an additive. Recommended for promoting adhesion to untreated polypropylene-based substrates.

Chlorinated Polyolefin Adhesion Promoter - 347W - Water-Reducible

CP 347W is a water dispersion of a chlorinated polyolefin. Oil in water-type emulsion. It contains 2-amino-2-methyl-1-propanol as the neutralizing amine which makes it more compatible with other waterborne resins and more useful as an additive. Recommended for promoting adhesion to untreated polypropylene-based substrates.

Chlorinated Polyolefin - 515-2 - 40% Solids in Toluene

This product is a 40% solids solution of Chlorinated Polyolefin 515-2 in Toluene and is a liquid at room temperature. CP 515-2 is compatible with a variety of resins.

Ethylene - Liquid

Eastman™ liquid ethylene is a highly flammable, colorless, nontoxic gas with a characteristic sweet odor and taste. Applications include refrigerant fluid for low temperatures, monomer for polyethylene and waxes, and a reactant.

N-Butanol

Eastman™ n-Butanol is a four carbon straight chain oxo alcohol. It is a medium-boiling liquid that is useful as a chemical intermediate and as a solvent for ambient dry and baking coatings.

N-Propyl Alcohol (N-Propanol)

Eastman™ n-Propanol, a three-carbon straight chain oxo alcohol, is a medium-boiling, colorless liquid that is widely used in flexographic and other printing ink applications. It has a very mild odor, similar to that of ethanol and is completely soluble in water.

Acetaldehyde

Eastman™ Acetaldehyde is a highly reactive, flammable, colorless liquid. It is miscible with water, ethyl alcohol, ethyl ether, acetone, benzene, gasoline, toluene, xylene, and acetic acid.

2-Ethylhexanol

This eight-carbon branched chain oxo alcohol with a high boiling point and slow evaporation rate features excellent reactivity as a chemical intermediate. It serves as a chain terminator in synthesizing condensation polymers and as an intermediate for plasticizers.

Propionaldehyde

Eastman™ Propionaldehyde is a colorless, flammable liquid used primarily as a chemical intermediate.

EB Solvent (Ethylene Glycol Monobutyl Ether)

Eastman EB Solvent (Ethylene Glycol Monobutyl Ether) offers numerous benefits in coating, ink, and cleaner applications. It is an excellent solvent for many coatings resin types, including alkyd, phenolic, maleic, epoxy, and nitrocellulose resins. Its unique combination of properties enables the effective removal of contaminants when used in Industrial & Institutional and/or household cleaners.

Isobutanol

Eastman™ Isobutanol is a medium-boiling, slow-evaporating, colorless liquid that is useful in organic synthesis, as a chemical intermediate, and as a solvent in coating applications.

Isobutyl Acetate

Eastman™ Isobutyl Acetate is a medium-boiling solvent with a typical mild, fruity, ester odor. Its combination of good solvent activity, desirable evaporation rate, and pleasant odor enables it to be used in a wide range of coating applications.

Isobutyric Acid

Isobutyric Acid is a colorless, medium boiling liquid. Esters of isobutyric acid are used as solvents for various applications where desirable odors and flavor characteristics are important.

Eastman cellulose acetate butyrate (CAB-531-1)

Eastman Cellulose Acetate Butyrate CAB-531-1 is a cellulose ester with a higher butyryl level than CAB-381 series esters. It offers improved compatibility, and due to its flexibility, it requires lower plasticizer modification. When combined with thermoplastic acrylic resins, it produces tough, weather and mar resistant films.

Eastman cellulose acetate propionate (CAP-482-20)

Eastman cellulose acetate propionate CAP-482-20 has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks, overprint varnishes, and nail lacquer topcoats.

Eastman cellulose acetate butyrate (CAB-381-0.1)

Eastman Cellulose Acetate Butyrate CAB-381-0.1 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels are needed. CAB-381-0.1 is used when lower viscosity for higher solids formulations and increased toughness with excellent surface hardness is desired. It is used in automotive basecoats for metallic flake control and is supplied as a dry, free-flowing powder.

Eastman cellulose acetate butyrate (CAB-381-0.5)

Eastman Cellulose Acetate Butyrate CAB-381-0.5 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels is needed. It is supplied as a dry, free-flowing powder.

Isobutyric Anhydride - Kosher

Isobutyric Anhydride, Kosher is a liquid with a boiling range of 180-187°C used primarily when a kosher product is required in chemical processing and as a chemical intermediate.

Propionic Acid - Food Grade - Kosher

Propionic Acid, Food Grade, Kosher is a food ingredient used in applications where a kosher food grade product is required. It is often used as an antimicrobial or flavoring agent.

N-Butyric Anhydride - Kosher

n-Butyric Anhydride is a water-white liquid that hydrolyzes to butyric acid. It has a minimum assay of 98%. This kosher product is for use in food as a reactant only.

Hydroxypivalyl Hydroxypivalate (HPHP) Glycol - Molten

HPHP, Molten is a difunctional ester-glycol used for manufacturing polyester resins for the powder, coil, and automotive coatings market. The bulk molten form of HPHP is shipped in tank trucks requiring a heated tank for storage.

EastaPure - PM Acetate (PGMEA or propylene glycol monomethyl ether acetate)

Eastman EastaPure™ PM acetate is being offered for photoresist formulations. It is a slow evaporating solvent with both ether and ester functional groups.

Eastman C-A-P cellulose ester NF (pellets)

Eastman™ C-A-P enteric coating material is a pH-sensitive cellulose derivative designed for coating pharmaceutical tablets, capsules or granules. It may also be used as a matrix material in solid dose forms and will withstand prolonged contact with acidic gastric fluids.

Methyl Propyl Ketone (MPK) - Ultra High Purity

Eastman™ MPK, UHP (Ultra High Purity) is a medium-evaporating, urethane grade, highly active solvent for most synthetic resins. It is ideal as a letdown solvent for high solids, air-dry resins used in low VOC alkyd and polyester/urethane coatings. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.

Eastar GN007 Copolyester - Natural

Eastar™ GN007 Copolyester is a water-clear glycol modified polyethylene terephthalate (PET) with an added mold release. This material offers an excellent combination of clarity, toughness, and melt strength that makes it useful for a variety of processing techniques and end-use applications.

Tenite Butyrate 285A2R30020 - Natural - Trsp

Tenite™ Cellulose Acetate Butyrate 285-20 has a plasticizer level of 20% and contains an odor mask.

Tenite Butyrate 565A2R30016 - Natural - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 565-16 has a 16% plasticizer level and an odor mask.

Eastman Spectar UV copolyester

Eastman Spectar UV™ copolyester is a versatile copolyester that extrudes into plastic sheet that is sparkling clear, tough, chemically resistant, odor free, easy to work with, and affordable. It is easy to fabricate, allowing greater design freedom. It can be laser cut, routed, welded, drilled, die-punched, bent hot or cold, or joined by screws, rivets, or bolts.

Sustane SAIB ET-10 (Sucrose Acetate Isobutyrate) - Food Grade - Kosher

Eastman Sustane™ SAIB ET-10 Food Grade, Kosher is primarily used as a weighting agent in beverages. It provides a pourable liquid that can be added directly to flavoring oil without heating.

Tenite Acetate 105E3V36327 - Clear - Trsp

Tenite™ Acetates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Acetate 105-27 is heat stabilized and has a plasticizer level of 27%.

Tenite Butyrate 285A2R30018 - Natural - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 285-18 has an 18% plasticizer level and odor mask.

Tenite Butyrate 485E3720008 - Clear - Trsp

Tenite cellulosic plastics are noted for their excellent balance of properties including toughness, hardness, strength, surface gloss, clarity, and a warm feel.

Eastar GN071 Copolyester - Natural

Eastar™ GN071 copolyester is a clear copolyester used in a variety of packaging and consumer product applications, including food and beverage packaging, general-purpose packaging, flexible film packaging, and consumer products.

Tenite Propionate 360E0096916 - Natural - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary depending on the plasticizer level. Tenite Propionate 360-16 has a natural, transparent color and a 16% plasticizer level.

Ethyl Acetate - Urethane Grade

Eastman™ Ethyl Acetate, Urethane Grade is a low-boiling, fast-evaporating solvent with a mild, pleasant odor. It is widely used in formulating printing inks, adhesives, and lacquers. Ethyl acetate is miscible with most organic solvents and can be used in cleaner blends fo the removal of oils, grease, and soils.

EastaPure - N-Butyl Acetate

Eastman EastaPure™ n-Butyl Acetate solvent is offered for negative and positive photoresist formulations and is used to make semiconductor chips.

Eastar MN210 Copolyester - Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ copolyester MN210, Natural is a brilliantly clear polymer with good impact strength, chemical resistance, dimensional stability, and low shrinkage rates. The slower rate of crystallization of this material makes it excellent for use in hot runner systems with valve or thermal gates.

Acetic Anhydride - Reagent Grade

Acetic Anhydride is manufactured by Eastman and supplied in various grades. This product is the reagent grade and is available in tank trucks, tank cars, and 55-gallon drums.

EEH Solvent (Ethylene Glycol 2-Ethylhexyl Ether)

Eastman EEH solvent (Ethylene Glycol 2-Ethylhexyl Ether) has long been used in performance specialty coatings applications. It offers an excellent balance of performance properties when used as a coalescent in architectural and industrial maintenance coatings.

Methyl Acetate - High Purity

Eastman™ Methyl Acetate - High Purity is an active, urethane grade, fast-evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in polyurethane coatings and in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate, HP is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.

Ethyl Acetate - NF/EP (National Formulary and European Pharmacopoeia)

Eastman™ Ethyl Acetate, NF/EP is a colorless, fragrant, low-boiling solvent. As a bulk pharmaceutical excipient, Ethyl Acetate, NF/EP meets the National Formulary (NF) and European Pharmacopoeia (EP) monograph specifications.

Ethyl Acetate - Food Grade

Eastman™ Ethyl Acetate, Food Grade is a colorless, fragrant, low-boiling solvent. This grade of ethyl acetate meets the monograph requirements for Ethyl Acetate, Food Grade, as set forth in the Food Chemicals Codex (FCC) and supplements. It is manufactured, processed, packed and held under appropriate Good Manufacturing Practices for use as a food chemical.

Ethyl Acetate - Food Grade - Kosher

Eastman™ Ethyl Acetate, Food Grade, Kosher is a colorless, fragrant solvent. This grade of ethyl acetate meets the monograph requirements for Ethyl Acetate, Food Grade Kosher, as set forth in the Food Chemical Codex (FCC) and supplements. It is manufactured, processed, packed and held under appropriate Good Manufacturing Practices for use as a food chemical. In addition, this grade of ethyl acetate is produced under rabbinical supervision and meets the requirements for Kosher and Pareve, including Passover.

Ethyl Acetate - NF/EP (National Formulary and European Pharmacopoeia) - Kosher

Eastman™ Ethyl Acetate, NF/EP, Kosher is a colorless, fragrant, low-boiling solvent. As a bulk pharmaceutical excipient, Ethyl Acetate, NF/EP, Kosher grade meets the National Formulary (NF) and European Pharmacopoeia (EP) monograph specifications and is a kosher product.

EastaPure - Ethyl Acetate

Eastman EastaPure™ Ethyl Acetate solvent is a viscosity reducer for resins used in photoresist formulations.

N-Butyl Propionate

Eastman™ n-Butyl Propionate is a non-HAP, slow-evaporating, and urethane grade solvent with good solvent activity for most coating resins. It provides low volatility to coatings formulations.

Provista Copolyester

Eastman Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand.

Eastar MN211 Copolyester - Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ Copolyester MN211, Natural contains a mold release for improved ejection. It is a brilliantly clear polymer with good impact strength, chemical resistance, dimensional stability, and low shrinkage rates. The slower rate of crystallization of this material makes it excellent for use in hot runner systems with valve or thermal gates.

Hydroxypivalyl Hydroxypivalate (HPHP) Glycol - Nuggets

HPHP Glycol Nuggets is a difunctional ester-glycol used for manufacturing polyester resins for the powder, coil, and automotive coatings market. The nugget form of HPHP is shipped in bags that have good resistance to caking.

Tenox TBHQ (Tertiary-Butylhydroquinone) Food Grade Antioxidant - Kosher

Eastman Tenox™ TBHQ food-grade antioxidant finds use in stabilizing oils, fats, foods, and cosmetics against oxidative deterioration and is the most effective antioxidant for highly unsaturated vegetable oils and many edible animal fats.

DuraStar Polymer DS2010 - Natural

DuraStar™ Polymer DS2010 Natural polymer has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. Easy to process, it flows readily and fills intricate molds.

Eastman Tetrashield MP2303

Eastman Tetrashield™ protective resin MP2303 formulations are suitable for 3-piece cans and bodies with sanitary or easy-open ends for hard-to-hold (HTH) foods and beverages. MP2303 provides improved formulation latitude.

DB Solvent (Diethylene Glycol Monobutyl Ether)

Eastman DB Solvent (Diethylene Glycol Monobutyl Ether) improves the flow-out and gloss of baking enamels, is an effective coalescent in both architectural and industrial maintenance formulations, can be used in printing inks to increase dry times, and provides excellent coupling ability for the effective removal of contaminants in Industrial & Institutional and/or household cleaners.

2-Ethylhexaldehyde

Eastman™ 2-Ethylhexaldehyde is an aldehyde product.

TMPD - Glycol

Eastman TMPD™ Glycol is used to formulate saturated polyester resins for liquid coatings and unsaturated polyester laminating resins sold into a wide variety of markets. It is available in cast solid form in drums or bulk molten form delivered in tank trucks.

Neopentyl Glycol (NPG) - Glycol Platelets

Eastman NPG is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. The platelet form is supplied in bags that exhibit excellent caking stability on storage.

Isobutyl Isobutyrate (IBIB)

Eastman™ IBIB is a slow-evaporating, economical retarder solvent used in nitrocellulose lacquers, coatings for plastic substrates, and high solids coatings. It exhibits high electrical resistance and low surface tension.

Texanol Ester Alcohol

Eastman Texanol™ is an high-performance coalescing aid, particularly under adverse conditions of high humidity and low temperature. Demonstrating excellent properties with associative thickeners, Texanol is a low-evaporating solvent in polyester coil coatings and high bake enamels.

Neopentyl Glycol (NPG) - Molten

Eastman NPG (Molten) is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. The bulk molten form is shipped in tank trucks that require a heated tank for storage.

Butyraldehyde - Dry

Eastman™ butyraldehyde is used as a fragrance intermediate.

Isobutyraldehyde - Dry

Eastman Isobutyraldehyde, Dry is a colorless, flammable liquid, and is used primarily as a chemical intermediate.

Neopentyl Glycol (NPG) 90

Eastman NPG 90 is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. This product is 90 parts NPG™ and 10 parts water, a liquid at or above 38°C, and delivered in bulk.

PM Solvent (Propylene Glycol Monomethyl Ether)

Eastman™ PM Solvent, a medium-boiling glycol ether, is an active solvent for cellulose acetate butyrate, nitrocellulose, epoxy, phenolic, acrylic, and alkyd resins. It is used in a variety of coating, printing ink, and cleaning applications.

PM Acetate (Propylene Glycol Monomethyl Ether Acetate )

Eastman™ PM Acetate is a slow evaporating solvent with both ether and ester functional groups. It is a colorless liquid with a mild odor used as an effective retarder solvent as well as being an excellent solvent for many coating polymers.

DE-HG Solvent

Eastman™ DE HG solvent is a blend of Eastman DE glycol ether and EG (70/30 wt. %). It is a colorless liquid, has very mild odor, and completely water miscible. It is used as a coalescent in latex paints and in floor polishes.

DP Solvent (Diethylene Glycol Monopropyl Ether)

Eastman DP Solvent (Diethylene Glycol Monopropyl Ether) is a slow-evaporating, water-miscible solvent useful in solution and water-based coatings. It is an active solvent for many coating materials and demonstrates very good coupling efficiency with resin systems in water-based coatings. Additionally, its low odor is advantageous in formulating printing inks and can be used in aqueous cleaners.

EP Solvent (Ethylene Glycol Monopropyl Ether)

Eastman™ EP Solvent (Ethylene Glycol Monopropyl Ether) is colorless and water-miscible over a wide range of temperatures with a slow evaporation rate. It is used in coatings and inks where a milder, less detectable odor is required and provides good viscosity control and high flash point. It can also be used to develop customized aqueous cleaners.

DB Solvent (Diethylene Glycol Monobutyl Ether) - Stabilized

Eastman™ DB Solvent, Stabilized is a high-boiling glycol ether used in baking enamels, printing inks, textile dyeing, or as a coalescent in latex paints. This grade contains BHT antioxidant.

Ethyl Acetate - Spectro Grade

Eastman™ Ethyl Acetate, Spectro Grade is a colorless, fragrant, low-boiling, fast evaporating solvent. This product is available as 99.9% pure.

TMPD - Glycol Platelets

Eastman TMPD™ is used to formulate saturated polyester resins for liquid coatings and unsaturated polyester laminating resins sold into a wide variety of markets. This form of Eastman TMPD™ is supplied as white, waxy platelets that are shipped in bags.

EP Solvent (Ethylene Glycol Monopropyl Ether) - Stabilized

Eastman™ EP Solvent is colorless and water-miscible over a wide range of temperatures with a slow evaporation rate. It is used in coatings where a milder, less detectable odor is required. This product is stabilized with BHT.

Acetic Acid - Glacial

For applications in drugs, foods, or feeds, Eastman provides glacial acetic acid in grades appropriate for these regulated uses.

Butyl Acetate

Eastman™ Butyl Acetate is a medium-boiling ester solvent with an evaporation rate of 1.0 making it ideal for quick drying nitrocellulose lacquers. A colorless liquid with a fruity odor, it is an active solvent for film-formers.

Triacetin

Eastman™ Triacetin is used as a plasticizer for cellulosic resins and is useful for imparting plasticity and flow to laminating resins. It is also used as a plasticizer for vinylidene polymers and copolymers. It is an ingredient in inks for printing on plastics, and as a plasticizer in nail polish.

Propyl Acetate

Eastman™ Propyl Acetate is a colorless liquid with a mild, fruity odor. It is an active solvent for nitrocellulose, cellulose acetate butyrate, polyester, alkyd, and acrylic resins. It has a medium evaporation rate and is a non-HAP solvent.

DE Acetate (Diethylene Glycol Monoethyl Acetate)

Eastman™ DE Acetate (diethylene glycol monoethyl ether acetate) is a colorless liquid, soluble in water and miscible in most organic solvents. It is primarily used as a coalescing aid in paints and as a solvent in inks. With broad resin solubility, it is suitable for use in coil coatings.

Methyl N-Amyl Ketone (MAK)

The high solvent activity, slow evaporation rate, low density and surface tension, and high boiling point of Eastman™ MAK (Methyl n-Amyl Ketone) make it ideal in formulating high solids coatings that meet VOC guidelines.

TEG-EH (Triethylene Glycol Bis (2-EthylHexanoate)) Plasticizer

Eastman TEG-EH (Triethylene Glycol Bis (2-Ethylhexanoate)) plasticizer is usually blended with plasticizers in PVC. For PVB resins, Eastman TEG-EH offers low viscosity for ease of compounding and low color for excellent clarity in automotive and residential and commercial window applications.

DOP Plasticizer

Food Contact Status compliant – Eastman™ DOP plasticizer (Bis(2-Ethylhexyl) Phthalate) is a light colored, low volatility, odorless liquid. It is the most widely used all-purpose plasticizer offered by Eastman for use with PVC resins. It features good stability to heat and ultraviolet light, a broad range of compatibility, and excellent resistance to hydrolysis.

DOA Plasticizer

Eastman™ DOA plasticizer (Bis(2-Ethylhexyl) Adipate) is a light colored, oily liquid generally used as a plasticizer for PVC. Eastman™ DOA features flexibility at low temperatures, good electrical properties, good resistance to weathering, and good stability to heat.

Triethyl Phosphate (TEP)

TEP is a clear, colorless liquid with a mild odor useful as a solvent in many applications, a plasticizer in tough, fire-resistant plastics, and as an agricultural chemical intermediate.

DuraStar Polymer DS1010 - Natural

DuraStar™ Polymer DS1010 Natural polymer contains a mold release. It has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. In addition, it flows readily, fills intricate molds, and is well suited for thick-wall applications.

Eastman Spectar 14471 copolyester clear frosted

Eastman Spectar Frost™ copolyester has a matte finish with outstanding durability and toughness that enables displays and fixtures to use thinner gauge sheet than other common materials. Eastman Spectar Frost™ retains its matte finish when thermoformed, hot bent and after other fabrication processes.

Sustane SAIB MCT (Sucrose Acetate Isobutyrate) - Food Grade - Kosher

Eastman Sustane™ SAIB MCT is a weighting agent designed for customers needing improved handling traits, enhanced cloud properties, and taste neutrality in beverages. Due to low viscosity, it can be added at common operating temperatures and conditions. The INCI (cosmetic ingredient) name for Eastman Sustane™ SAIB MCT is Sucrose Acetate Isobutyrate (and) Caprylic/Capric Triglyceride.

Provista Copolymer UVI

Provista™ UVI is a Provista™ copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand.

Provista Copolymer UVO

Eastman Provista™ UVO is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand.

DuraStar Polymer MN611 - Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>DuraStar™ Copolyester MN611 contains a mold release. It has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics.

Eastar MN200 Copolyester - Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ Copolyester MN200 is an amorphous copolyester with excellent flow characteristics as well as radiation resistance and chemical resistance.

Eastman Cadence GS3 copolyester

Eastman Cadence™ GS3 is a clear copolyester resin specifically for calendered film applications including decorative laminates, general purpose packaging, transaction and identification cards, and protective films. It has enhanced processing ease and higher melt strength compared to Cadence™ GS2.

DuraStar Polymer MN621 - Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>DuraStar™ Copolyester MN621 contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. This resin is the toughest of the Durastar™ family of products.

DuraStar Polymer DS1110UVI - Natural

DuraStar™ Polymer DS1110UVI Natural polymer contains an ultraviolet light stabilization package. It is recommended for indoor applications requiring enhanced color stability upon extended exposure to fluorescent light.

DuraStar Polymer DS2110UVI Natural

DuraStar™ Polymer DS2110UVI Natural polymer contains an ultraviolet light stabilization package. It is recommended for indoor applications requiring enhanced color stability upon extended exposure to fluorescent light..

Eastar 6763 Copolyester

<i>Eastar™ 6763 copolyester meets ISO 10993 and/or USP Class VI biocompatibility requirement; Food Contact Status compliant</i><br> Eastar 6763 is a clear, amorphous material that can be molded and extruded with ease. Its excellent performance properties include clarity, toughness, good melt strength, no dusting, no stress whitening, good heat sealability, easy cutting and thermoforming. Eastar 6763 may be colored using color concentrates, dry colors, or liquid colorants. Eastar 6763 can be safely sterilized with proper ethylene oxide, radiation, or electron beam methods without property loss or color shift. It is well suited for medical packaging.

Tenite Propionate 307E4000018 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. This Tenite™ Propionate 307-18 is clear and an 18% plasticizer level.

Eastar GN119 Copolyester

Eastar™ GN119 Copolyester is a low-I.V. PETG, for sale only in Asia as a high-flow formulation.

Eastman Cadence ADD2 copolyester

Release additives are required to calendar Eastman Cadence™ materials.

Adhesion Promoter - 550-1 (25% in Xylene)

Eastman AP 550-1 (25% in Xylene) is a nonchlorinated polyolefin for improved coating adhesion on TPO and polypropelene-based substrates. It has excellent humidity & gasoline resistance particularly under 1K systems. It allows the formulation of melamine-cured systems with excellent performance properties previously only available in 2K systems.

Chlorinated Polyolefin - 730-1 - 100% Solids

Eastman™ Chlorinated Polyolefin 730-1 is designed to be the active component in adhesion promoter primers used to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) plastics.

Eastman Tritan Renew TX1501HF-25 copolyester

Eastman Tritan™ Renew TX1501HF-25 is a high flow grade of Eastman Tritan. Tritan Renew TX1501HF-25 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1001, as well as Tritan Renew TX1001-25 and TX1001-50. Eastman Tritan Renew TX1501HF-25 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TX1501HF-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1501HF-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Metam Potassium 690

<b>Metam potassium is a “Restricted Use Pesticide” in the US.</b><br>Soil disinfectant for controlling nematodes, soil diseases, weeds and germinating weed seeds. The product works by fumigation. It is applied prior to seeding or planting, creating a favorable biotope that promotes healthy crop growth.

Diethylaminoethanol

Diethylaminoethanol (DEAE) is a clear liquid. It is used as a neutralizing amine for boiler water, coatings, etc.

Monoethylamine

Monoethylamine (MEA) is available as an anhydrous liquid. MEA has an ammonia-like odor and is miscible with water, alcohol and ether.

Monoethylamine 70%

Monoethylamine 70% (MEA-70%) is an aqueous colorless solution. MEA-70% has an ammonia-like odor.

Diethylamine

Diethylamine (DEA) is available as an anhydrous colorless liquid. DEA has an ammonia-like odor.

Triethylamine

Triethylamine (TEA) is a colorless liquid with an ammonia-like odor.

Mono-N-Propylamine

Mono-n-Propylamine (MNPA) is a clear colorless liquid with an ammonia-like odor. MNPA is miscible with water, alcohol and ether.

Di-N-Propylamine

Di-n-Propylamine (DNPA) is a colorless liquid with an ammonia-like odor. DNPA is moderately soluble in water.

Di-N-Propylamine HP

Di-n-Propylamine (DNPA) is a colorless liquid with an ammonia-like odor. DNPA is moderately soluble in water.

Tri-N-Propylamine

Tri-n-Propylamine (TNPA) is a colorless liquid.

Monoisopropylamine

Monoisopropylamine (MIPA) is a colorless flammable liquid. MIPA has an ammonia-like odor and is miscible with water, alcohol and ether.

Monoisopropylamine 70%

Monoisopropylamine (MIPA-70%) is an aqueous colorless solution with an ammonia-like odor.

Mono-N-Butylamine

Mono-n-Butylamine (MNBA) is available as a colorless liquid. MNBA has an ammonia-like odor and is miscible with water, alcohol and ether.

Di-N-Butylamine

Di-n-Butylamine (DNBA) is available as a colorless liquid with an ammonia-like odor

Di-N-Butylamine HP

Di-n-Butylamine (DNBA) is available as a colorless liquid with an ammonia-like odor.

Tri-N-Butylamine

Tri-n-Butylamine (TNBA) is a clear liquid. TNBA is insoluble in water and very soluble in alcohol and ether.

Tri-n-Butylamine (TNBA) High Purity

Tri-n-Butylamine (TNBA) is a clear liquid. TNBA is insoluble in water and very soluble in alcohol and ether.

Trimethylamine - 25% Aqueous Solution

TMA 25% is a versatile building block that is used in a limited number of applications

Trimethylamine - 40% Solution (TMA-40)

TMA 40% is a versatile building block that is used in a limited number of applications.

Diamylamine

Diamylamine is used in the rubber chemical processing process, primarily as diamyldithiocarbamates for rubber accelerators.

Monoamylamine

Monoamylamine (MAA) is a specialty mixture of n-amylamine and 2-methylbutylamine. A unique neutralizing agent and versatile intermediate for the synthesis of boramides, neutralized fatty acids and triazines.

Triamylamine

Triamylamine (TAA) is a statistical mixture of four tertiary amines with n-amyl and 2-methylbutyl groups.

Thiram SC

Thiram SC is a broad-spectrum, protectant fungicide that protects strawberries from disease development with multiple site activity.

T-Butylaminoethanol

T-Butylaminoethanol (TBAE) is available as a white solid with an ammoniacal odor. TBAE is a useful intermediate and niche neutralizing agent.

Di-N-Butylaminoethanol

Di-n-butylaminoethanol (DBAE) is available as a colorless liquid with an ammoniacal odor. DBAE is an oil soluble alkanolamine.

N-Butylaminoethanol

N-Butylaminoethanol (BAE) is available as a colorless to light yellow liquid with a slight odor. BAE is an excellent multipurpose alkanolamine.

Isopropylaminoethanol - Mixed

Isopropylaminoethanol (IPAE) is available as a light yellow to amber liquid with an ammoniacal or amine-like odor.

N-Butyldiethanolamine

N-Butyldiethanolamine (BDEA) is available as a colorless to light yellow liquid with a slight odor. BDEA has a very low vapor pressure.

Eastman Synergex

Synergex™ is available as a colorless to light yellow liquid with a slight odor. This low-odor N-alkylalkanolamine is ideal for use as a neutralizing agent in semi-synthetic and full-synthetic emulsion lubricants.

Eastman Synergex T

Synergex™ T is available as a colorless to light yellow liquid with a slight odor. This high-performance tertiary amine additive is capable of boosting the performance of metalworking fluids.

Dimethylamino-2-Propanol

Dimethylamino-2-propanol (DMA 2P) is available as a colorless liquid with an ammoniacal odor. DMA 2P has the lowest boiling point of any available alkanolamin.

Advantex

Advantex™ is available as a colorless to light yellow liquid with a mild amine-like odor. This product is used as a neutralizing amine additive for coatings.

Eastman Synergex T Plus

Synergex™ T Plus is available as a colorless to light yellow liquid with no odor. This excellent multi-purpose tertiary amine additive offers very low vapor pressure and ideal partition properties.

Vantex T

Vantex™ T is a neutralization amine additive that will allow paint manufacturers to formulate high quality paints, having virtually no amine odor.

Diethylhydroxylamine (DEHA) - 85%

DEHA 85% solutions is available as a yellow liquid with an amine-like odor

Diethylhydroxylamine (DEHA) - Anhydrous

Anhydrous is available as a light yellow liquid with an amine-like odor

Term-N-ator P

Term-N-Ator P is available as a yellow liquid with an amine-like odor

N, N - Dimethyldecanamide (C10 Amide)

N-N-Dimethyldecanamide is a clear liquid with colorless to brownish color. The product is insoluble in water.

TMTD (Tetramethylthiuram Disulfide)-PDR

This product is designed for the rubber industry. Two grades are available: pdr; pdr-d. All grades are white to off white.

TMTD (Tetramethylthiuram Disulfide)-PDR-D

This product is designed for the rubber industry. Two grades are available: pdr; pdr-d. All grades are white to off white.

Choline Chloride - 75 Energy

Choline Chloride 75 can be used as a clay stabilizer, whose function it is to prevent clay swelling in the shale rocks and minimize the migration of clay fines and can replace materials such as quaternary ammonium salts and KCl.

TETD (Tetraethylthiuram Disulfide) Ultra

This product is designed for the rubber industry. Two grades are available: Ultra & grs-3mm. Both grades are off white.

Flowsan FS

Flowsan FS is a new seed-treatment formulation specifically designed for the dressing of maize seeds. It is adapted to the newest industrial technologies as well as to farm scale processes

Dimethyldodecylamine (DIMLA) 12

Dimla 12 mainly contains alkyldimethylamines with a chain length C12. The product is a clear to slighty yellow liquid at room temperature and has the characteristic odor of fatty amines.

Dimethyldodecylamine (DIMLA) 14

Dimla 14 mainly contains alkyldimethylamines with a chain length C14. The product is a clear to slighty yellow liquid at room temperature and has the characteristic odor of fatty amines.

Eastman TamiSolve CB

TamiSolve CB is a strong organic base. It finds its main application in cleaning and degreasing of metal surfaces.

Eastman TamiSolve NxG

TamiSolve™ NxG is a high-boiling, dipolar aprotic solvent. TamiSolve NxG has good solvency for a wide range of compounds and has high chemical and thermal stability.

Choline Chloride - 70 Energy

Choline Chloride 70 can be used as a clay stabilizer, whose function it is to prevent clay swelling in the shale rocks and minimize the migration of clay fines and can replace materials such as quaternary ammonium salts and KCI.

AdapT 100

AdapT 100 is a MDEA-based solvent designed for the selective removal of H<sub>2</sub>S from H<sub>2</sub>S and CO<sub>2</sub> containing gas streams.

AdapT 201

AdapT 201 is a formulated MDEA-based solvent designed for the deep removal of CO<sub>2</sub> from CO<sub>2</sub> containing gas streams.

AdapT 202

AdapT 202 is a formulated MDEA-based solvent designed as a solvent with high concentration of activation agent in order to replenish or modify the concentration of the activation agent in the acid gas removal unit whilst avoiding handling problems with the pure activation agent.

AdapT 203

AdapT 203 is a formulated MDEA-based solvent designed for the deep removal of CO<sub>2</sub> from CO<sub>2</sub> containing gas streams.

Clearway F1

Based on a formulation of potassium formate and corrosion inhibitors, Clearway F1 is an effective de-icer for airport runways, taxiways and aprons.

Clearway 3

Clearway® is acknowledged as one of the leaders in airport runway de-icing and the product range has been developed and expanded to include both liquid and solid formatebased and acetate-based products.

Clearway 1

Based on a formulation of potassium acetate and corrosion inhibitors, Clearway 1 has been on the market for nearly 30 years as an effective liquid runway de-icer with low environmental impact.

Formic Acid - 99%

Formic acid 99% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Formic Acid - 85%

Formic acid 85% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Formic Acid - 94%

Formic acid 94% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Freezium - 60C

Freezium™ is a secondary coolant developed specifically for use in indirect cooling systems and heat pumps.

Mould Control LP2 NC

Eastman™ Mould Control LP2 NC is a non-corrosive propionic acid-based liquid product for aerobic preservation against molds in feedstuffs.

Formic Acid - A-15

Formic acid A-15 is an activated formic acid with enhanced acidification and pH adjustment properties.

Yeast Control LF2

Eastman™ Yeast Control LF2 provides wide-ranging efficacy against spoiling organisms. Unbuffered formic acid drops feed pH efficiently enabling formation of undissociated organic acid molecules which disturb cell functions of spoiling flora thus hindering their growth. Eastman Yeast Control LF2 is especially needed when moist by-products of food industry are delivered to farms to be used within several days. Typically, in those circumstances microbial contamination easily happens and due to the properties of the feed micro-organisms can rapidly multiply consequently spoiling the feed. Eastman Yeast Control LF2 can efficiently improve shelf life of the feed, especially when used before severe multiplication of the spoiling organism. Therefore, the product application should preferably take place already on the feed production site.

Clearway 6S

Based on sodium acetate, Clearway 6s is an effective solid runway de-icer with low environmental impact.

Eastman cellulose acetate butyrate (CAB-381-0.1) food contact

Eastman Cellulose Acetate Butyrate CAB-381-0.1, Food Contact is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels are needed. CAB-381-0.1, Food Contact is used when lower viscosity for higher solids formulations and increased toughness with excellent surface hardness is desired. It is supplied as a dry, free-flowing powder.

Eastman cellulose acetate (CA-398-3) food contact

Eastman Cellulose Acetate CA-398-3, Food Contact is one of the lower viscosity solution grades of cellulose acetate with an average ASTM viscosity of 3 seconds. Blended with appropriate solvents, plasticizers, and other modifying resins, it is used in coatings formulations for a variety of substrates. This multipurpose rheology enhancer provides high strength and good resistance to ultraviolet light, heat, oils and greases.

Eastman cellulose acetate propionate (CAP-482-0.5) food contact

Eastman Cellulose Acetate Propionate CAP-482-0.5, Food Contact is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats. It is compliant with FDA additive regulations for use in certain food-contact applications.

Eastman cellulose acetate butyrate (CAB-381-20) food contact

Eastman Cellulose Acetate Butyrate CAB-381-20, Food Contact is a cellulose ester with medium butyryl content, very high ASTM(A) viscosity, and great rheological modification. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness and good film strength. It is supplied as a dry, free-flowing powder.

Eastman cellulose acetate butyrate (CAB-381-2) food contact

Eastman Cellulose Acetate Butyrate CAB-381-2, Food Contact is a cellulose ester with medium butyryl content and high viscosity. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. It is supplied as a dry, free-flowing powder.

AIV - 2000 Plus Na

AIV 2000 Plus Na is a formic acid based product recommended for pre-wilted silage, and crimping applications.

Ethylene Glycol - Polyester Grade

Eastman™ Ethylene Glycol, Polyester Grade is a high purity grade of ethylene glycol with excellent appearance and clarity. Eastman™ Ethylene Glycol, Polyester Grade is used for manufacturing polyester fibers and polyethylene terephalate (PET) resins.

AIV - 2 Plus Na

AIV&reg; 2 Plus Na is a concentrated formic acid-based product, used for anaerobic preservation of silage and also to control growth of bacteria and yeasts in liquid feed and easily spoiled fresh feed.

Protural Granular

Eastman Protural™ is a solid zootechnical feed additive for application in weaning piglets improving their performance.

Protural Powder

Eastman Protural™ is a solid zootechnical feed additive for application in weaning piglets improving their performance.

Formic Acid - 85 Na Feed

Eastman™ Formic Acid 85 Na Feed is a liquid preservative to protect feeding stuffs against deterioration caused by a broad spectrum of microorganisms.

Enhanz

Eastman Enhanz™ reduces the feed conversion rate and effects of oxidative stress and improves the digestibility of proteins and fat.

Mould Control LF2 Na

Eastman Mould Control LF2 Na is a buffered liquid blend, especially developed for grain treatment, for storage times up to 12 months.

AIV - Ässä Na

AIV&reg; Ässä Na is an advanced formic acid-based product having a broad inhibitory effect on spoilage micro-organisms.

Eastar EN001 Copolyester

Eastar™ EN001 is a clear copolyester for single use food and beverage and general purpose packaging. It is designed for injection stretch blow molding (ISBM) and has enhanced processing capability compared to commodity PET.

Stabilizer Pig Na

Eastman™ Stabilizer Pig Na is used in liquid pig feed to control pH and bacteria growth in mixing tank and in feeding pipeline and valves.

Eastar DG021 Glass Filled Polyester

Eastar™ copolyester DG021 contains 20% glass fiber as well as a mold release agent derived from vegetable based sources.

Protaq LF1 Na

Eastman Protaq™ LF1 Na is a complementary feed to be used in drinking water to reduce the pH of the drinking water and the stomach.

Protaq LF3 Na

Eastman Protaq<sup>TM</sup> LF3 Na is a complementary feed to be used via drinking water for broilers.

Eastman Tetrashield IC3000

Eastman Tetrashield™ IC3000 is a durable TMCD-based resin system that improves the performance of both clearcoats and pigmented topcoats.

GEM Retinyl Linoleate

INCI: <I>retinyl linoleate</I></br>A naturally derived pro-retinol composed of retinol and high-purity linoleic acid from safflower oil, Eastman GEM retinyl linoleate is a biobased, formulation-stable, easy-to-handle, nonirritating antiaging ingredient. At room temperature, it is a pourable liquid and is supplied as a high-purity (>95%) assay; therefore, it is free of solvent, diluents, and carriers.</br></br>Eastman GEM retinyl linoleate is approved in China.

Formic Acid - 85 Feed

In Europe, the feed additive formic acid is authorized for the following functions: preservative, silage additive and hygiene condition enhancer.

Eastman Tetrashield PC4000

Eastman Tetrashield™ PC4000 is a high-performance TMCD-based resin system for 2K topcoats.

Eastman GMX200 Copolyester

A versatile amorphous polymer, the properties of Eastman GMX200 enable it to be used in a broad array of manufacturing processes including injection molding, injection stretch blow molding, reheat stretch blow molding, and extrusion. The unique impact and heat resistance properties of Eastman GMX200 copolyester can extend the life span of containers that are historically viewed as single use products.

Formic Acid - 75 Feed

<p>Eastman™ Formic Acid 75 Feed is a liquid preservative to protect feeding stuffs against deterioration caused by a broad spectrum of micro-organisms.

AIV - 3 Plus Na

AIV 3 Plus Na is a formic acid-based product used for pre-wilted silage (DM 25 - 45%) and crimping applications.

Eastman cellulose acetate butyrate (CAB-531-1) food contact

Eastman Cellulose Acetate Butyrate CAB-531-1, Food Contact is a cellulose ester with a higher butyryl level than CAB-381 series esters. It offers improved compatibility, and due to its flexibility, it requires lower plasticizer modification. When combined with thermoplastic acrylic resins, it produces tough, weather and mar resistant films.

Eastman cellulose acetate butyrate (CAB-553-0.4), food contact

Eastman Cellulose Acetate Butyrate CAB-553-0.4, Food Contact is soluble in low molecular weight alcohols as well as other common organic solvents. It has alcohol solubility with excellent compatibility and pigment-wetting characteristics. High hydroxyl content allows a high level of crosslinking. CAB-553-0.4, Food Contact will produce colorless films with good ultraviolet stability and is supplied as dry, free-flowing powder, offering maximum formulating convenience and flexibility.

Eastman cellulose acetate propionate (CAP-482-20) food contact

Eastman Cellulose Acetate Propionate CAP-482-20, Food Contact has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks and overprint varnishes.

Sodium Benzoate Feed

Eastman Sodium Benzoate Feed, reduces clostridial activity, proteolysis and dry matter losses during ensiling.

Eastman GMX201 Copolyester - Natural

Eastman GMX201 Copolyester contains a mold release derived from vegetable-based sources. A versatile polymer, the properties of Eastman GMX201 Copolyester enable it to be used in a broad array of manufacturing processes including injection molding, injection stretch blow molding, reheat stretch blow molding, and extrusion. The unique impact and heat resistance properties of Eastman GMX201 Copolyester can extend the life span of containers that are historically viewed as single use products.

Eastar DG011 Glass Filled Polyester

Eastar™ copolyester DG011 contains 10% glass fiber as well as a mold release agent. Its most outstanding features are excellent chemical resistance, toughness, heat resistance, contact clarity, ease of processing, hydrolytic stability, and increased modulus or stiffness.

Treva Engineering Bioplastic GC6011 - Clear

Eastman TREVA GC6011 is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Butyric Acid - Food Grade

Esters and salts of butyric acid are used in a variety of applications including perfumes and flavorings.

Butyric Acid - Feed Grade

Eastman™ Butyric Acid Feed is a clear, colorless liquid, with a strong pungent odor. It is a synthetic chemically defined flavoring, authorized to be used in all type of feeding stuffs for all animal species.

Butyric Acid - Food Grade - Kosher

Esters and salts of butyric acid are used in a variety of applications including perfumes and flavorings. This grade of butyric acid is produced under rabbinical supervision in full accordance with Jewish dietary law including Passover.

Stabilizer Crimp

Eastman™ Stabilizer Crimp is a specialty product for crimping.

Treva Engineering Bioplastic GC6021 - Clear

Eastman TREVA GC6021 is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Eastman Tritan HM1020 glass-filled copolyester

Eastman Tritan™ HM1020 copolyester contains 10% glass fiber, as well as a mold release agent derived from vegetable based sources.

Eastman Tritan HM1040 glass-filled copolyester

Eastman Tritan™ HM1040 copolyester contains 20% glass fiber, as well as a mold release agent derived from vegetable based sources.

Eastman MXF221 Copolyester

Eastman MXF221 copolyester is an amorphous material. Eastman MXF221 copolyester contains a mold release derived from vegetable based sources.

Dimethyldodecylamine (DIMLA) 1214 RSPO MB

DIMLA TM 1214 RSPO MB mainly contains alkyldimethylamines with chain length C12 and C14. The product is a clear to slighty yellow liquid at room temperature and has the characteristic odor of fatty amines.

AdapT 251

AdapT 251 is a formulated MDEA-based solvent designed for total removal of acid gases from natural gas streams.

AdapT 253

AdapT 253 is a formulated MDEA-based solvent designed for total removal of acid gases from natural gas streams.

NB3HB Solvent

Eastman™ NB3HB solvent is an ester alcohol solvent that offers an exceptional combination of performance, safety, and value.

Therminol 54 Heat Transfer Fluid

Therminol 54 is a synthetic fluid designed to provide reliable, consistent heat transfer performance over a long service life at maximum bulk temperatures up to 280°C (540°F).

Eastman Tritan HM1060 glass-filled copolyester

Eastman Tritan™ HM1060 copolyester contains 30% glass fiber as well as a mold release agent derived from vegetable based sources.

Resin Dispersion 38276

Resin Dispersion 38276 is an anionic, aqueous, solvent-free, and APE (alkylphenol ethoxylate) free dispersion of a stabilized rosin ester.

Cedroz

Cedroz™ is an innovative new post-planting, terpene-based nematicide for the control of root-knot nematodes in fruit and vegetables.

Treva Engineering Bioplastic OP6026 - Clear

Eastman TRĒVA™ is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Propcorn NC

Eastman™ Propcorn NC is a non-corrosive propionic acid-based product for aerobic preservation and for improved aerobic stability of crimped feeds and haylage.

Propcorn Plus

Eastman Propcorn™ Plus is a highly concentrated, slightly buffered liquid blend of propionic acid and its ammonium salt for mold control in feedingstuffs and for improving aerobic stability after silo opening by controlling yeasts and molds.

ProGIT SF2

Eastman ProGIT SF2 prevents the growth of harmful bacteria in the feed and improves the quality and shelf life.

Mould Control LP3 NC

Eastman Mould Control LP3 NC is a non-corrosive propionic acid-based liquid product for aerobic preservation against molds in feedstuffs.

Bacteria Control SF1

Eastman Bacteria Control SF1 preserves compound feeds and raw materials and prevents recontamination micro-organisms.

ProGIT SF1

Eastman ProGIT SF1 prevents the feed against deterioration by micro-organisms and improves the quality and shelf-life of the feed.

ProGIT SF3

Eastman ProGIT SF3 prevents the feed against deterioration by microorganisms and improves the quality and shelf life of the feed.

AdapT 115

AdapT 115 is a clear hygroscopic liquid with an amine-like odor. The product as supplied is colorless, but prolonged storage may cause a yellowish discoloration.

Eastman Tetrashield MP2101

MP2101 formulations are designed for applications which require improved flexibility, such as easy-open end (EOE) applications or interior twist-off caps. Formulation requires co-resin to achieve desired properties.

AdapT 231

AdapT 231 is a formulated MDEA-based solvent designed for the deep removal of CO<sub>2</sub> from CO<sub>2</sub> containing gas streams.

Eastman Tetrashield MP2100

MP2100 formulations are suitable for 3-piece sanitary ends and bodies for both easy-to-hold and medium-aggressive foods and beverages. Specific formulation needs to be used to achieve desired properties.

Treva Engineering Bioplastic GC6021NAT - Natural

Eastman TREVA GC6021 is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Engineering Bioplastic OP6026NAT - Natural

Eastman TREVA™ is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Zendex DB-300

Eastman Zendex™ DB-300 agricultural solvent is a non-VOC, high-boiling, nonpolar solvent with good solvency for a wide range of agricultural chemical active ingredients, specifically designed for agricultural formulations.

Methyldiisopropanolamine (MDIPA)

MDIPA is a clear hygroscopic liquid with an amine-like odor. The freshly distilled product is colorless.

Eastman TamiSolve NxG-PS

TamiSolve™ NxG-PS is a high-boiling, dipolar aprotic solvent used in pharmaceutical synthesis. TamiSolve NxG-PS has good solvency for a wide range of compounds and a favorable safety profile.

GEM Retinyl Sunflowerate

INCI: <I>retinyl sunflowerseedate</I></br>A naturally derived pro-retinol composed of retinol and sunflower fatty acids, Eastman GEM retinyl sunflowerate is a biobased, formulation-stable, easy-to-handle, nonirritating antiaging ingredient. At room temperature, it is a pourable liquid and is supplied as a high-purity (>95%) assay; therefore, it is free of solvent, diluents, and carriers.

Treva Engineering Bioplastic GC6011NAT - Natural

Eastman TREVA GC6011 is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Eastman Calcium Propionate Feed

Eastman Calcium Propionate Feed prevents growth of mold and other harmful microbes in different types of feedstuffs and prevents recontamination after production of the compound feed.

Eastman DN500 Copolyester

Eastman DN500 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, DN500 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates.

Marlotherm SH heat transfer fluid

Marlotherm SH is a high-performance synthetic organic heat transfer medium for use in the liquid phase in closed and forced circulation heat-transfer systems.

Marlotherm LH heat transfer fluid

Marlotherm LH is a low-viscosity, synthetic organic heat transfer medium for use in both the liquid and vapor phase for closed, forced-circulation heat transfer systems.

Membrane Material M230

Eastman Membrane Material M230 is a high-viscosity, high molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane, especially for osmotic and gas filtration applications..<P>For applications that require food contact compliance, please refer to Eastman Membrane Material M230, Food Contact.</P>

Membrane Material M203

Eastman Membrane Material M203 is a low viscosity, low molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane, especially for osmotic and gas filtration applications.<P>For applications that require food contact compliance, please refer to Eastman Membrane Material M203, Food Contact.</P>

Membrane Material M203 - Food Contact

Eastman Membrane Material M203, Food Contact is a low viscosity, low molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane.<P>This product is manufactured, stored, handled, and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/2011) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.</P><P>For applications that do not require food contact compliance, please refer to Eastman Membrane Material M203.</P>

Membrane Material M210 - Food Contact

Eastman Membrane Material M210, Food Contact is a medium viscosity, medium molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane.<P>This product is manufactured, stored, handled and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/2011) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.</P><P>For applications that do not require food contact compliance, please refer to Eastman Membrane Material M210.</P>

Membrane Material M230 - Food Contact

Eastman Membrane Material M230, Food Contact is a high-viscosity, high molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane.<P>This product is manufactured, stored, handled and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/2011) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.</P><P>For applications that do not require food contact compliance, please refer to Eastman Membrane Material M230.</P>

Membrane Material M300 - Food Contact

Eastman membrane material M300 is a high-viscosity, high molecular weight cellulose triacetate. It is supplied as dry pellets. Its high purity permits manufacturing of membranes with improved quality control.<P>This product is manufactured, stored, handled and transported by Eastman under conditions adhering to current Good Manufacturing Practices for food contact applications. This product meets requirements for use in certain food contact applications under regulations of the U.S. Food and Drug Administration (21 CFR), European Commission (Regulation 10/2011) and Switzerland Ordinance of the FDHA on materials and articles intended to come into contact with foodstuffs (817.023.21, Annex 10). Contact your Eastman representative or authorized Eastman distributor for specific regulatory compliance documentation.</P><P>For applications that do not require food contact compliance, please refer to Eastman Membrane Material M300.</P>

Membrane Material M210

Eastman Membrane Material M210 is a medium viscosity, medium molecular weight cellulose diacetate. It is supplied as fine, dry, free-flowing powder. The powder is free from coarse particles and excessive fines. Its high purity permits manufacturing of membranes with fewer defects in the separating layer of the membrane, especially for osmotic and gas filtration applications..<P>For applications that require food contact compliance, please refer to Eastman Membrane Material M210, Food Contact.</P>

Eastar BR403 Copolyester

Eastar™ BR403 copolyester is a water-clear polymer that is great for toothbrush applications. It will not crystallize and thus offers wider processing latitude than conventional crystallizable polyesters while still providing an excellent combination of clarity, toughness, and melt strength.

Eastar BR303 Copolyester

Eastar™ BR303 copolyester is a brilliantly clear polymer with excellent impact strength, chemical resistance, and low shrinkage, making it a great choice for toothbrush applications.

Zendex DB-120

Zendex™ DB-120 agricultural solvent is a non-VOC, high-boiling, nonpolar solvent. With good solvency for a wide range of chemical active ingredients, it is specifically designed for agriculture formulations. Zendex DB-120 is currently commercial in the United States, Brazil, Belgium, Estonia, France, Germany, Hungary, Ireland, Italy, The Netherlands, Spain, Switzerland, and the United Kingdom.

Eastman Tetrashield AC1040

Eastman Tetrashield™ AC1040 is a durable TMCD-based resin system that improves the performance of automotive clearcoats.

Marlotherm XC heat transfer fluid

Marlotherm XC is a high performance, wide temperature-range heat transfer fluid for heating and cooling in the most varied fields of applications.

Eastman Tetrashield MP2103

MP2103 formulations are suitable for 3-piece cans and bodies with sanitary or easy-open ends for hard-to-hold (HTH) foods and beverages. Resin provides improved formulation latitude.

Treva Engineering Bioplastic TR6021NAT - Natural

Eastman TREVA™ TR6021 is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Engineering Bioplastic TR6021 - Clear

Eastman TREVA TR6021 is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Eastman Embrace Encore copolyester

The world's leading shrink film just got better with the introduction of Eastman Embrace™ Encore to the Eastman Embrace™ family of resins.

Eastman Tritan MX731-09016FC copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><br>Eastman Tritan™ Copolyester MX731 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ copolyester MX731 is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ copolyester MX711.

Eastman Tritan MXF321-19164FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Keitex LF1

Eastman Keitex<sup>TM</sup> LF1 is an anhydrous (water max. 2.0 m-%) short and medium chain fatty acid blend, containing formic acid which favorably affects the hygienic characteristics of feed and raw materials by reducing a specific microbiological contamination, e.g. <i>Salmonella</i> and other harmful micro-organisms for all animal species.

Eastman Tritan MXF321HF-19164FC copolyester

Eastman Tritan MXF321HF copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321HF has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321HF has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability to fill complex parts. Tritan MXF321HF contains a mold release derived from vegetable-based sources.

Eastman Tritan Renew TX1001-25 copolyester

Eastman Tritan™ Renew TX1001-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX1001-25 contains a mold release derived from vegetable based sources. This product's most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1001-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1001-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Eastman Tritan Renew TX2001-25 copolyester

Eastman Tritan™ Renew TX2001-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX2001-25 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX2001-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Eastman cellulose acetate butyrate (CAB-381-2)

Eastman Cellulose Acetate Butyrate CAB-381-2 is a cellulose ester with medium butyryl content and high viscosity. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. It is supplied as a dry, free-flowing powder.

Eastman cellulose acetate butyrate (CAB-381-20)

Eastman Cellulose Acetate Butyrate CAB-381-20 is a cellulose ester with medium butyryl content, very high ASTM(A) viscosity, and great rheological modification. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness and good film strength. It is supplied as a dry, free-flowing powder.

Eastman cellulose acetate butyrate (CAB-500-5)

Eastman Cellulose Acetate Butyrate CAB-500-5 is a cellulose ester with high butyryl content, low hydroxyl content and medium viscosity. It produces a relatively soft, flexible film requiring little or no plasticizer in many applications and offers a wide range of solubility and compatibility. It is useful in leather coatings and as a flow control additive in polyurethanes.

Eastman cellulose acetate butyrate (CAB-551-0.2)

Eastman Cellulose Acetate Butyrate CAB-551-0.2 is a cellulose ester with high butyryl content and relatively low molecular weight. Its good compatibility with various resin systems and its solubility in a wide variety of solvents makes it useful as an additive in numerous coating compositions, including high-solids and thermoset coatings, and as a modifier for UV-curing systems.

Eastman cellulose acetate (CA-320S)

Eastman Cellulose Acetate CA-320S is a cellulose ester with a high hydroxyl content. It is supplied as pellets.

Acetic Acid - Glacial - Reagent Grade

Eastman™ reagent-grade glacial acetic acid can be used in the semiconductor industry, in chemical laboratories or in other industrial applications where an exceptionally pure grade of glacial acetic acid is required.

Eastman cellulose acetate propionate (CAP-504-0.2)

Eastman cellulose acetate propionate CAP-504-0.2 is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.

Eastman cellulose acetate (CA-394-60LF)

Eastman cellulose acetate CA-394-60LF is a very high-melting, low odor cellulose ester having limited solubility and compatibility. This multipurpose rheology enhancer offers high strength and good resistance to ultraviolet light, heat, oils, and greases. It is useful in lacquers for glass, plastic, wire and release coatings.

Eastman cellulose acetate butyrate (CAB-551-0.01)

Eastman Cellulose Acetate Butyrate (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio.

Eastman cellulose acetate butyrate (CAB-381-2 BP)

Eastman Cellulose Acetate Butyrate CAB-381-2BP grade ester is a slight modification of the standard CAB-381-2 and has a higher hydroxyl and acetyl content and lower butyryl content. The BP grade was designed primarily to meet the needs of European formulators.

Eastman cellulose acetate butyrate (CAB-381-20BP) 100%

Eastman cellulose acetate butyrate CAB-381-20BP grade ester is a lower hydroxyl content version of the standard CAB-381-20 and has a lower viscosity. The BP grade was designed primarily to meet the needs of European formulators.

Eastman cellulose acetate butyrate (CAB-321-0.1)

Eastman Cellulose Acetate Butyrate CAB-321-0.1 is a cellulose ester with a low butyryl content (32.5%) and low molecular weight. Designed for use in automotive basecoats, it is resistant to attack and resistant to redisolve by solvents typical in clearcoats. It has a viscosity of 0.10 sec and 0.38 poise. CAB-321-0.1 is supplied as a fine white powder.

EastaPure - Acetic Acid

Eastman EastaPure™ acetic acid has an extremely low metal content and is an excellent choice for use in etching solutions for semiconductor chips and other electronic applications.

Mono T-butyl Hydroquinone (MTBHQ)

Eastman™ MTBHQ (2-Tert-Butylhydroquinone) is a light tan solid used primarily as a polymerization inhibitor and industrial antioxidant. Its higher solubility and increased potency at higher temperatures combine to make it more useful than unsubstituted hydroquinone in many applications.

Poly TDP-2000

Eastman™ Poly TDP-2000 antioxidant is typically used as a secondary antioxidant along with phenolic primary antioxidants in plastics. Eastman™ Poly TDP-2000 shows excellent stability in high-temperature applications and functions well in the presence of UV light stabilizers and other additives.

Hydroquinone - Photographic Grade

Hydroquinone is a white, crystalline solid and is used as a good general-purpose inhibitor, stabilizer, antioxidant, and intermediate. This product is the Photographic Grade of Hydroquinone.

Tenox R Food Grade Antioxidant - Kosher

Antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Tenox 4 Food Grade Antioxidant - Kosher

Antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Tenox 8 Food Grade Antioxidant - Kosher

Antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life. Eastman Tenox™ 8 Food-Grade Antioxidant, Kosher is a formulation of Eastman Tenox™ BHT.

3(N-Benzyl-N-Ethylamino) Acetanilide

3-(N-Benzyl-N-ethylamino)acetanilide is a brown solid melting at 104&deg; C that is used as a photographic chemical.

Tenox 20 Food Grade Antioxidant - Kosher

Eastman Tenox™ 20 food-grade antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Tenox 20A Food Grade Antioxidant - Kosher

Eastman Tenox™ 20A food-grade antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Hydroquinone - USP (United States Pharmacopeia)

Hydroquinone has been formulated for many years into creams, lotions, and gels to produce effective skin-lightening products. Eastman™ Hydroquinone, USP Grade, meets or exceeds the requirements of the United States Pharmacopeia.

Tenox 21 Food Grade Antioxidant - Kosher

Eastman Tenox™ 21 food-grade antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Tenox 25 Food Grade Antioxidant - Kosher

Eastman Tenox™ antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Tenox 4B Food Grade Antioxidant - Kosher

Antioxidants stabilize various fats, oils, food, and cosmetics against oxidative deterioration, thus extending product shelf life.

Eastman Eastek 1100 polymer dispersion

Eastek™ 1100 polymer is a film forming polyester polymer supplied as an aqueous dispersion containing 33% polymer solids.

Eastman Eastek 1200 polymer dispersion

Eastek™ 1200 polymer dispersion is a film forming polyester polymer supplied as an aqueous solution containing 2% n-propanol and 30% polymer solids.

Eastar Renew DN501-50 Copolyester

Eastman Eastar™ Renew DN501-50 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, Eastar™ Renew DN501-50 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Eastar™ Renew DN501-50 is also ideally suited for two-shot molding due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastar™ Renew DN501-50 contains a mold release derived from vegetable based sources.

Eastman Cristal One Renew 30

Eastman Cristal™ One Renew-30 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One is recommended for thicker luxury bottles with complex shapes.

Eastman Cristal One Pro Renew 30

Eastman Cristal™ One Pro Renew-30 is a copolyester designed to be fully compatible with the PET recycling stream.

AIV - Via

AIV<sup>®</sup> Via is a premixture of silage additives for several feed ensiling purposes where risks are related to porosity of ensiled material as well as moisture range favoring molds.

Eastman Tritan Renew VX351HF-50 copolyester

Tritan™ Renew VX351HF-50 is an amorphous copolyester with excellent clarity and impact resistance.

Acitra LH2 NC

Eastman Acitra<sup>TM</sup> LH2 NC is a buffered, liquid product to preserve feedstuffs from harmful microorganisms.

Eastman Tritan Renew EX401-25 copolyester

Tritan™ Renew copolyester EX401-25, specifically developed for the Infant Care market, is an amorphous copolyester with excellent appearance and clarity.

Eastman Tritan MXF321-21060FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Tritan MXF321-21061FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Cristal One E

Eastman Cristal™ One E is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Cristal One E Renew 30

Eastman Cristal™ One E Renew-30 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Cristal One E Renew 50

Eastman Cristal™ One E Renew-50 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Tritan MXF321-21077FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Tritan MX811-08003FC copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Eastman Tritan MX711-21095FC copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX711 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Tritan MX711 has been formulated for medical devices.

Eastman Cristal One E Renew 100

Eastman Cristal™ One E Renew-100 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Tritan MXF321-21043FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Tritan MXF321HF-21090FC copolyester

Eastman Tritan MXF321HF copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321HF has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321HF has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability to fill complex parts. Tritan MXF321HF contains a mold release derived from vegetable-based sources.

Eastman Tritan MX711-21058FC copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX711 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Tritan MX711 has been formulated for medical devices.

Eastman Tritan MXF321HF-21092FC copolyester

Eastman Tritan MXF321HF copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321HF has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321HF has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability to fill complex parts. Tritan MXF321HF contains a mold release derived from vegetable-based sources.

Eastman Tritan Renew LX101-30 copolyester

Eastman Tritan™ Renew LX101-30 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew LX101-30 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

Eastman Tritan Renew LX101-50 copolyester

Eastman Tritan™ Renew LX101-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew LX101-50 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

Eastman Tritan Renew LX150HF-30 copolyester

Eastman Tritan™ Renew LX150HF-30 copolyester is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Tritan Renew LX150HF-30 has viscosity reductions of 40-50% relative to standard grades of Tritan.

Eastman Tritan Renew LX150HF-50 copolyester

Eastman Tritan™ Renew LX150HF-50 copolyester is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Tritan Renew LX150HF-50 has viscosity reductions of 40-50% relative to standard grades of Tritan.

Eastman Tritan Renew LX151HF-50 copolyester

Eastman Tritan™ Renew LX151HF-50 is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Tritan Renew LX151HF-50 has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan.

Eastman Cristal One Pro MR

Eastman Cristal™ One Pro MR is a copolyester product that contains mold release for ease of injection. It is designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to approximatively 12mm), while maintaining clarity and color.

Eastman Tritan Renew LX151HF-30 copolyester

Eastman Tritan™ Renew LX151HF-30 is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Tritan Renew LX151HF-30 has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan™.

Eastman Tritan Renew EX501-50 copolyester

Eastman Tritan™ Renew EX501-50 is an amorphous copolyester specifically developed for the Infant Care market. Its most outstanding features are consistent glass-like clarity even after multiple dishwasher cycles.

Eastman Tritan Renew LX100-30 copolyester

Eastman Tritan™ Renew LX100-30 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance.

Eastman Cristal One Pro Renew 50-MR

Eastman Cristal™ One Pro MR Renew-50 is a copolyester that contains mold release for ease of ejection. It is designed to be fully compatible with the PET recycling stream.

Eastman Cristal One Pro Renew 30-MR

Eastman Cristal™ One Pro MR Renew-30 is a copolyester that contains mold release for ease of injection. It is designed to be fully compatible with the PET recycling stream.

Eastman Cristal One MR

Eastman Cristal™ One MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal One MR is recommended for thicker luxury bottles with complex shapes.

Eastman Tritan Renew LX500-50 copolyester

Eastman Tritan™ Renew LX500-50 is an amorphous copolyester specifically developed for use in blow molding applications for the cosmetic, fragrance, and personal care markets.

Eastman Tritan Renew LX500-30 copolyester

Eastman Tritan™ Renew LX500-30 is an amorphous copolyester specifically developed for use in blow molding applications for the cosmetic, fragrance, and personal care markets.

Eastman Tritan Renew LX100-50 copolyester

Eastman Tritan™ Renew LX100-50 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance.

Eastman Spectar Renew 14471-30 copolyester

Eastman Spectar™ Renew 14471-30 copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar™ 14471-30 is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.

Eastman Cristal One Pro Renew 25

Eastman Cristal™ One Pro Renew-25 is a copolyester designed to be fully compatible with the PET recycling stream.

Eastar Renew DN501-10 Copolyester

Eastman Eastar™ Renew DN501-10 copolyester is a high flow product designed and engineered for many different applications. With its excellent color and clarity and its ability to mold thick parts with improved gate aesthetics, Eastar™ Renew DN501-10 is clearly a well-suited copolyester for many applications. Other outstanding features are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and lower scrap rates. Eastar™ Renew DN501-10 is also ideally suited for two-shot molding due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. Eastar™ Renew DN501-10 contains a mold release derived from vegetable based sources.

Eastar EB364 Copolyester

Eastman Eastar™ EB364 is a copolyester designed to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the beverage, food, and homecare markets.

Eastman Cristal One Renew 25

Eastman Cristal™ One Renew-25 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-25 is recommended for thicker luxury bottles with complex shapes.

Eastman Cristal Renew EN067-25 copolyester

Eastman Cristal™ Renew copolyester EN067-25 is a copolyester designed to be fully compatible with the PET recycling stream.

Eastman Cristal Renew EN076-25 copolyester

Eastman Cristal™ Renew copolyester EN076-25 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin.

Sustane CG 200 Fragrance Fixative

Eastman Sustane™ CG 200 fragrance fixative promotes longevity in fine fragrance and personal care formulations.

Eastman Cristal One E Renew 25

Eastman Cristal™ One E Renew-25 is a copolyester designed to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Cristal One Pro Renew 25-MR

Eastman Cristal™ One Pro MR Renew-25 is a copolyester that contains mold release for ease of injection. It is designed to be fully compatible with the PET recycling stream.

Eastman Cristal One Renew 25-MR

Eastman Cristal™ One Renew-25 MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-25 MR is recommended for thicker luxury bottles with complex shapes.

Eastman Cristal One Renew 50-MR

Eastman Cristal™ One Renew-50 MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-50 MR is recommended for thicker luxury bottles with complex shapes.

Eastman Cristal One Renew 30-MR

Eastman Cristal™ One Renew-30 MR is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One Renew-30 MR is recommended for thicker luxury bottles with complex shapes.

Eastman Tetrashield PW5100

Eastman Tetrashield™ PW5100 is a high-performance resin system designed for powder coating applications. Tetrashield protective resin systems are designed to enhance coating performance for architectural powder and protective coatings.

Eastman Cristal Renew AN014-30 copolyester

Eastman Cristal™ Renew copolyester AN014-30 Natural is a high flow product that contains a mold release.

Eastman Cristal Renew AN014-50 copolyester

Eastman Cristal™ Renew copolyester AN014-50 Natural is a high flow product that contains a mold release.

Eastman Cristal AN001 copolyester

Eastman Cristal™ copolyester AN001 Natural has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but Eastman Cristal™ copolyester AN001 Natural maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. It is one of our premier materials for the cosmetics and personal care packaging market.

Eastman Cristal Renew AN004-30 copolyester

Eastman Cristal™ Renew copolyester AN004-30 Natural contains a mold release. It has an excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Its processability coupled with its outstanding chemical resistance makes it well suited for thick-wall applications.

Eastman Cristal Renew AN004-50 copolyester

Eastman Cristal™ Renew copolyester AN004-50 Natural contains a mold release. It has an excellent appearance and is nearly water clear. Its most outstanding features are its chemical resistance and processing capabilities. These features make it well suited for thick-wall applications.

Eastman Eastek 4100 polymer

Eastman Eastek 4100 is a high-performance polyester resin for polyurethane hot melt adhesive applications. Eastman Eastek 4100 resin is designed to improve cross linking, increase Tg, and improve formulation flexibility. These attributes enable greater productivity, application consistency, long-term durability, and expanded application space for woodworking, packaging, assembly, and automotive applications.

Eastman Tritan Renew HM1020-50 copolyester

Eastman Tritan™ Renew HM1020-50 copolyester contains 10% glass fiber, as well as a mold release agent derived from vegetable based sources.

Eastman Tritan Renew HM1060-50 copolyester

Eastman Tritan™ Renew HM1060-50 copolyester contains 30% glass fiber as well as a mold release agent derived from vegetable based sources.

Eastman Cristal EN059 copolyester

Eastman Cristal™ EN059 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance.

Eastman Advantis 343-1 25X adhesion promoter

Eastman Advantis™ 343-1 25X adhesion promoter is a 25% solution of a chlorinated polyolefin in xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Advantis 343-1 25X demonstrates excellent adhesion to polypropylene-based substrates and promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.

Eastman Advantis 343-1 40X adhesion promoter

Eastman Advantis™ 343-1 40X adhesion promoter is a 40% solids solution of chlorinated polyolefin 343-1 solids in xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Advantis 343-1 40X demonstrates excellent adhesion to polypropylene-based substrates and promotes adhesion to steel, galvanised steel, phosphated steel, wood and rigid PVC.

Eastman Advantis 343-3 25X adhesion promoter

Eastman Advantis™ 343-3 25X adhesion promoter is a 25% solids solution of chlorinated polyolefin 343-3 in xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. Advantis 343-3 25X has a good solvent tolerance for a wide range of solvents. The high chlorine content of Advantis 343-3 25X gives improved compatibility with co-resins. It is also recommended as stir-in additive to promote adhesion to PP-based substrates.

Eastman Advantis 730-1 20A adhesion promoter

Eastman Advantis™ 730-1 20A adhesion promoter (20% solids in Aromatic 100) is an efficient adhesion promoter in primers to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) substrates. It has excellent humidity and gasoline resistance and superior high temperature performance.

Eastman Advantis 550-1 25X adhesion promoter

Eastman Advantis™ 550-1 25X adhesion promoter (25% in xylene) is a nonchlorinated polyolefin for improved coating adhesion on TPO and polypropelene-based substrates. It has excellent humidity and gasoline resistance, particularly under 1K systems. It allows the formulation of melamine-cured systems with excellent performance properties previously only available in 2K systems.

Eastman Advantis 153-2 25X adhesion promoter

Eastman Advantis™ 153-2 25X adhesion promoter is a 25% solution of a chlorinated polyolefin in xylene. It has a 21-25 wt % chlorine content and a Gardner color value of 12-15. It is recommended as an adhesion-promoting primer for untreated polyethylene-based substrates.

Eastman Advantis 343-3 50X adhesion promoter

Eastman Advantis™ 343-3 50X adhesion promoter is a 50% solution of chlorinated polyolefin in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. Eastman Advantis 343-3 50X adhesion promoter has a good solvent tolerance for a wide range of solvents. High chlorine content in Advantis 343-3 50X gives improved compatibility with co-resins. It is also recommended as stir-in additive to promote adhesion to PP-based substrates.

Eastman Advantis 515-2 40X adhesion promoter

Eastman Advantis™ 515-2 40X adhesion promoter is a 40% solids solution of chlorinated polyolefin in Xylene and is a liquid at room temperature. It is compatible with a variety of resins and is recommended as stir-in additive to promote adhesion to PP and other difficult-to-coat substrates.

Eastman Advantis 515-2 40A adhesion promoter

Eastman Advantis™ 515-2 40A adhesion promoter is a 40% solids solution of chlorinated polyolefin in Aromatic 100 and is a liquid at room temperature. Advantis 515-2 40A is compatible with a variety of resins. It is recommended as stir-in additive to promote adhesion to PP and other difficult-to-coat substrates.

Eastman Acetic Acid/Acetic Anhydride 60/40 Blend

Eastman™ Glacial Acetic Acid/Acetic Anhydride 60/40 Blend is for general industrial uses.

Eastman Tritan MXF321-21059FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Tritan MX711-09016FC copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX711 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Tritan MX711 has been formulated for medical devices.

Eastman Advantex JS dechlorinating additive

Advantex™ JS (TEA) is a colorless liquid with an ammonia-like odor.

Eastman Cristal GN071 copolyester

Eastman Cristal™ GN071 copolyester is recommended for a variety of applications including thick-walled containers that are prevalent in the cosmetics and personal care markets. This copolyester offers good processability with the benefits of glass such as high clarity, brightness, and good color.

Eastman Cristal Renew GN071-30 copolyester

Eastman Cristal™ Renew GN071-30 copolyester is recommended for a variety of applications including thick-walled containers that are prevalent in the cosmetics and personal care markets. This copolyester offers good processability with the benefits of glass such as high clarity, brightness, and good color.

Clearway SF3

Based on sodium formate, Clearway SF3 is an effective solid runway de-icer with low environmental impact.

Meltium

Meltium® is a novel formate-based de-icing solution developed expecially for non-airport applications.

Choline Chloride - 78 Feed

Choline Chloride or (2-Hydroxyethyl) Trimethylammonium Chloride is an essential nutrient and finds its main application as a feed additive.

Eastman Synergex LA

Synergex™ LA is a hydrophobic N-alkylalkanolamine that is ideal for use as the hydrophobic amine component of a metalworking fluid biostabilization package.

Trimethylamine - 30% Solution (TMA 30)

TMA 30% is a versatile building block that is used in a limited number of applications.

AdapT 110

AdapT 110 is a clear hygroscopic liquid with an amine-like odor. The product as supplied is colorless, but prolonged storage may cause a yellowish discoloration.

Dimethylamine Anhydrous (DMA) - EU

Dimethylamine Anhydrous (DMA) is a versatile building block that is used in a wide variety of applications.

Dimethylamine 40% aqueous solution (DMA-40) - EU

Dimethylamine 40% aqueous solution (DMA40) is a versatile building block that is used in a wide variety of applications.

Dimethylamine 60% aqueous solution (DMA-60) - EU

Dimethylamine 60% aqueous solution (DMA60) is a versatile building block that is used in a wide variety of applications.

Monomethylamine Anhydrous (MMA) - US

Monomethylamine Anhydrous (MMA) is a versatile building block that is used in a wide variety of applications.

Monomethylamine 40% aqueous solution (MMA-40) - EU

Monomethylamine 40% aqueous solution (MMA40) is a versatile building block that is used in a wide variety of applications.

Trimethylamine Anhydrous (TMA) - EU

Trimethylamine Anhydrous (TMA) is a versatile building block that is used in a limited number of applications.

Monomethylamine Anhydrous (MMA) - EU

Monomethylamine Anhydrous (MMA) is a versatile building block that is used in a wide variety of applications.

Dimethylamine Anhydrous (DMA) - US

Dimethylamine Anhydrous (DMA) is a versatile building block that is used in a wide variety of applications.

Monomethylamine 50% aqueous solution (MMA-50) - US

Monomethylamine 50% aqueous solution (MMA50) is a versatile building block that is used in a wide variety of applications.

Trimethylamine Anhydrous (TMA) - US

Trimethylamine Anhydrous (TMA) is a versatile building block that is used in a limited number of applications.

VersaMax Plus Plasticizer

Eastman VersaMax™ Plus is a non-phthalate, general purpose solution that provides improved dry times, better efficiency, lower fusion temperatures, and a broader formulation window when compared to traditional ortho-phthalates.

Dimethylammonium Chloride 70% (DMA.HCl 70%)

Dimethylammonium Chloride 70% (DMA.HCl 70%) is available as an aqueous solution in a concentration up to 70%

Trimethylammonium Chloride 70% (TMA.HCl 70%)

Trimethylammonium Chloride 70% (TMA.HCl 70%) is a clear, colorless aqueous solution.

Ethylaminoethanol

Ethylaminoethanol (EAE) is available as a colorless liquid with an ammoniacal odor. EAE is a specialty alkanolamine.

Methyl Formate 97%

Methyl formate, a methyl ester of formic acid, is a clear liquid with an ethereal odor, high vapor pressure, and low surface tension.

Formic Acid - 95%

Formic acid 95% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Formic Acid - 90%

Formic acid 90% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Formic Acid - 82%

Formic acid 82% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Formamide - 99,7%

Formamide is an amide and it is manufactured from methyl formate and ammonia. It is a clear liquid, miscible with water, ethanol and acetone and has a slight ammoniacal odor.

Formic Acid - 99,7%

Formic acid is the strongest of the simple, unsaturated carboxylic acids. Furthermore, unlike other organic acids, formic acid has the advantage of being both a carboxylic acid and an aldehyde.

Formic Acid - 75%

Formic acid 75% is abundant in nature and has been used for many years as an environmentally friendly alternative in industries such as textiles, natural rubber and leather processing.

Choline Chloride - 75 Feed

Choline Chloride or (2-Hydroxyethyl) Trimethylammonium Chloride is an essential nutrient and finds its main application as a feed additive.

Eastman Tritan EX501 copolyester

Tritan EX501 is an amorphous copolyester specifically developed for the Infant Care market. Its most outstanding features are consistent glass-like clarity even after multiple dishwasher cycles.

Dimethylamino-2-Propanol - 77%

Dimethylamino-2-propanol 77% mixed is available as a colorless liquid with an ammoniacal odor. DMA-2P has the lowest boiling point of any available alkanolamine

Membrane Material M300

<P>Eastman membrane material M300 is a high-viscosity, high molecular weight cellulose triacetate. It is supplied as dry pellets. Its high purity permits manufacturing of membranes with improved quality control, especially for osmotic and gas filtration applications.</P><P>For applications that require food contact compliance, please refer to Eastman Membrane Material M300, Food Contact.</P>

Eastman cellulose acetate propionate (CAP-504-0.2) food contact

Eastman Cellulose Acetate Propionate CAP-504-0.2, Food Contact is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.

Advantex DM

Eastman Advantex™ DM is a colorless-to-light yellow clear liquid with a mild amine-like odor.</br></br>This product is used as a neutralizing amine additive for coatings. Advantex DM provides excellent buffering capacity and is a cost effective choice to achieve low odor paint.

Eastman Tetrashield MP2304

Eastman Tetrashield™ protective resin MP2304 formulations are designed for gold-coated 3-piece cans and bodies with sanitary or easy-open ends for both easy-to-hold and hard-to-hold foods and beverages. Resin provides improved functionality to benefit gold phenolic coatings, and offers broad formulation latitude.

Eastman Tritan MXF321-21071FC copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Tritan Renew HM1040-50 copolyester

Eastman Tritan™ Renew HM1040-50 copolyester contains 20% glass fiber, as well as a mold release agent derived from vegetable based sources.

Eastman Cristal Renew DN011-30 copolyester

Eastman Cristal™ Renew DN011-30 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastman Cristal™ Renew DN011-30 copolyester contains a mold release.

Eastman Cristal Renew DN011-50 copolyester

Eastman Cristal™ Renew DN011-50 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastman Cristal™ Renew DN011-50 copolyester contains a mold release.

Eastman Advantis 510W

Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin-based plastics (TPO, PP). Eastman Advantis 510W is chlorine-free and APEO-free.

Eastman Cristal Renew 400-15 copolyester

Eastman Cristal™ Renew 400-15 copolyester is a high flow product. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew EN059-30 copolyester

Eastman Cristal™ EN059-30 copolyester is an Eastman Specialty Plastics product for specific customer accounts only.

Eastman Cristal Renew EN059-50 copolyester

Eastman Cristal™ EN059-50 copolyester is an Eastman Specialty Plastics product for specific customer accounts only.

Eastman Cristal Renew GN071-50 copolyester

Eastman Cristal™ Renew GN071-50 copolyester is recommended for a variety of applications including thick-walled containers that are prevalent in the cosmetics and personal care markets. This copolyester offers good processability with the benefits of glass such as high clarity, brightness, and good color.

Eastman Cristal Renew GN071-100 copolyester

Eastman Cristal™ Renew GN071-100 copolyester is recommended for a variety of applications including thick-walled containers that are prevalent in the cosmetics and personal care markets. This copolyester offers good processability with the benefits of glass such as high clarity, brightness, and good color.

DOA Renew 20 Plasticizer - Kosher

Eastman DOA Renew 20 plasticizer (Bis(2-Ethylhexyl) Adipate), Kosher is a light colored, oily liquid generally used as a plasticizer for PVC. Eastman DOA Renew 20 plasticizer is used to produce clear films for food packaging applications.

Eastman Cristal DN011 copolyester

Eastman Cristal™ DN011 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN011 contains a mold release.

Treva Engineering Bioplastic TR6041NAT - Natural

Eastman Treva™ engineering bioplastic is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Eastar Renew GN071-15 Copolyester - Natural

Eastar™ Renew GN071-15 copolyester is a sustainable, clear copolyester used in a variety of packaging and consumer product applications, including food and beverage packaging, general-purpose packaging, flexible film packaging, and consumer products.

Eastar Renew EN001-25 Copolyester

Eastar™ Renew EN001-25 is a clear copolyester for single use food and beverage and general purpose packaging. It is designed for injection stretch blow molding (ISBM) and has enhanced processing capability compared to commodity PET.

Eastman Spectar Renew 14471-50 copolyester

Eastman Spectar™ Renew 14471-50 copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar™ 14471-30 is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.

2-Ethylhexanoic Acid

Eastman™ 2-Ethylhexanoic Acid is a colorless, high-boiling liquid having a mild odor. The metallic salts of Eastman™ 2-ethylhexanoic acid are used as driers for odorless paints, inks, varnishes, and enamels.

Diisobutyl Ketone (DIBK)

Eastman™ DIBK (Diisobutyl Ketone) is a slow-evaporating, low-density solvent that has good activity for many synthetic resins. It is useful as a retarder solvent to improve flow and minimize humidity blushing.

SAIB-90EA (Sucrose Acetate Isobutyrate-Ethyl Acetate)

Eastman™ SAIB-90EA is a stable liquid that has a light color, as well as good thermal, hydrolytic, and color stability. It is a blend of sucrose acetate isobutyrate with about 10% ethyl acetate, providing a low viscosity liquid that is easy to work with. It is well-suited for coatings and nail polish lacquers.

SAIB-100 (Sucrose Acetate Isobutyrate)

Eastman™ SAIB-100 (Sucrose Acetate Isobutyrate) is an odorless and tasteless, thermally stable, viscous liquid with a very light color. The electrical properties of Eastman™ SAIB are equal to or better than those of many plasticizers and it possesses an especially high volume resistivity.

2-Ethylhexyl Acetate

Eastman™ 2-Ethylhexyl Acetate is a high-boiling retarder solvent with low water solubility, mild odor, and a slow evaporation rate. It is used to promote flow and retard blushing in lacquers, NC lacquer emulsions, screen inks, baking enamels and air-dry enamels.

Methyl Isoamyl Ketone (MIAK)

The high solvent activity, slow evaporation rate, low density and surface tension, and high boiling point of Eastman™ MIAK (Methyl Isoamyl Ketone), make it ideal in formulating low-viscosity, high solids coatings with reduced VOC.

EB Acetate (Ethylene Glycol Monobutyl Ether Acetate)

Eastman™ EB Acetate (Ethylene Glycol Monobutyl Ether Acetate) is a high-boiling glycol ether-ester. Its slow evaporation rate provides excellent flow and leveling in high-bake coatings as well as air-dry systems such as epoxy coatings. It has limited water miscibility. It is supplied as a urethane grade solvent.

DB Acetate (Diethylene Glycol Monobutyl Ether Acetate)

Eastman DB Acetate (Diethylene Glycol Monobutyl Ether Acetate) is a high-boiling ester widely used as a solvent in printing inks and high-bake enamels; it is also used as a coalescing aid in low pH latex paints. It is especially applicable in screen inks and as a component in coil coatings. It has also found use as a coalescing aid, a coil coating component, and in the separation of alcohols and ketones by distillation.

Ethylene Glycol Diacetate (EGDA)

Eastman Ethylene Glycol Diacetate (EGDA) is a colorless, low odor, very slow-evaporating solvent that gives good flow-out to baking lacquers and enamels. Major uses include thermoplastic acrylic coatings as a reflow solvent and in foundry core-binding applications.

Methyl Isobutyl Ketone

Eastman™ Methyl Isobutyl Ketone (MIBK) is a medium-evaporating, low density, highly active solvent for use in inks, coatings, and adhesives. It is also used in a wide variety of other applications and markets.

Sustane SAIB (Sucrose Acetate Isobutyrate) - Food Grade - Kosher

Eastman Sustane™ SAIB (Sucrose Acetate Isobutyrate) Food Grade, Kosher is a high purity distilled product that is odorless and tasteless at levels used in beverages. It is used primarily in citrus beverages as a weighting agent or flavor emulsion stabilizer to prevent separation of essential citrus oils.

TOTM (Tris (2-Ethylhexyl) Trimellitate) Plasticizer

Eastman™ TOTM plasticizer (Tris (2-Ethylhexyl) Trimellitate) is the ideal PVC plasticizer for use in applications where low volatility is of supreme importance, such as wire and cable insulation and interior automotive. It also has properties that are required for dishwasher gaskets and photograph storage.

SAIB-90 (Sucrose Acetate Isobutyrate)

Eastman™ SAIB-90 (Sucrose Acetate Isobutyrate) is a stable liquid that has a light color, as well as good thermal, hydrolytic, and color stability. It is a blend of sucrose acetate isobutyrate with about 10% denatured ethanol, providing a low viscosity liquid that is easy to work with. This product is well-suited for coatings and nail polish lacquers.

Acetic Anhydride

Acetic Anhydride is manufactured by Eastman and supplied in various grades.

Methyl Propyl Ketone (MPK)

Eastman™ MPK (Methyl n-Propyl Ketone) is a medium evaporating, urethane-grade solvent. It is an active solvent for most synthetic resins including acrylics, polyesters, cellulosics, epoxies, vinyls, and alkyds. Its high solvency, low density, and medium evaporation rate make it attractive as a letdown solvent for high-solids resins used in formulating coatings with low VOC content. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.

Methyl Acetate

Eastman Methyl Acetate is an active, fast evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.

C-11 Ketone

Eastman C-11 Ketone is a low-cost, slow-evaporating, low-density mixture of ketone solvents. It is useful as a retarder solvent for primers, coil coatings, maintenance coatings and high-solids enamels. In these coatings, it improves gloss and leveling, reduces orange peel, minimizes solvent popping, and helps reduce VOCs. In many coatings, it can be used alone or blended with other solvents to replace isophorone and dibasic esters. Eastman C-11 Ketone has good solvency for a wide range of resins including nitrocellulose, alkyds, polyesters, acrylics, epoxies, and some vinyl chloride/vinyl acetate copolymers. Compared with other solvents in the same evaporation range, C-11 Ketone often offers an economic advantage.

Acetic Acid - Glacial - Acetic Anhydride - 40/60 Blend

Eastman™ Glacial Acetic Acid/Acetic Anhydride 40/60 Blend is for general industrial uses.

Acetic Acid - 90% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 90% dilution strength.

Acetic Acid - 84% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 84% dilution strength.

Acetic Acid - 80% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 80% dilution strength.

Acetic Acid - 70% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 70% dilution strength.

Acetic Acid - 56% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 56% dilution strength.

Acetic Acid - 95% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 95% dilution strength.

Acetic Acid - 92% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 92% dilution strength.

Triacetin - Food Grade - Kosher

Eastman™ Triacetin, Kosher, Food Grade, meets all Food Chemicals Codex (FCC) specifications and is manufactured under good manufacturing practices (GMP). One of its main uses is as a plasticizer in chewing gum.

Triacetin - Food Grade

Eastman™ Triacetin, Food Grade is used as an ingredient in many food and cosmetic products. Its high solvency power and low volatility make triacetin a good solvent and fixative for many flavors and fragrances. One of its main uses is as a plasticizer in chewing gum.

1,4-Cyclohexanedicarboxylic Acid High Purity (CHDA-HP)

CHDA is a cycloaliphatic diacid for use in polyester resins for coatings and fiberglass-reinforced plastics. It is also ideally suited improving performance of waterborne, high solids, powder coatings and coil coating applications. CHDA is supplied as white to off-white powder in various package sizes.

EastaPure - MAK Solvent (2-heptanone or methyl n-amyl ketone)

Eastman EastaPure™ MAK (Methyl n-Amyl Ketone) is being offered for positive photoresist formulations. It is a high-purity, low-trace metal solvent.

Acetic Acid - 60% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 60% dilution strength.

Acetic Anhydride - Kosher

Acetic Anhydride is supplied in various grades. This product is the kosher grade and may be used in foods as a reactant only.

Acetic Acid - Glacial - Food Grade

This grade of glacial acetic acid meets the requirements of the Food Chemical Codex and is produced under appropriate current good manufacturing practices (cGMP) for use as a food additive.

Propionic Anhydride

Eastman™ Propionic Anhydride is a colorless liquid having a pungent odor and high boiling point. It is soluble in alcohol, ether, chloroform, and alkalies, but decomposes in water.

N-Butyric Anhydride

Eastman™ n-Butyric Anhydride is a water-white liquid that hydrolyzes to butyric acid. It has a minimum assay of 98%.

Butyric Acid

Eastman™ Butyric acid (C<sub>3</sub>H<sub>7</sub>COOH) is a clear, colorless liquid, with a strong pungent odor. Esters and salts of butyric acid are used in a variety of applications including perfumes, flavorings, and animal feeds.

Propionic Acid

This product is a general sales grade Propionic Acid and may be used to produce numerous esters, salts, and other derivatives for use in the plastics, coatings, agricultural chemicals, food, flavor, and perfume industries.

Isobutyric Anhydride

Isobutyric Anhydride is a liquid with a boiling range of 180-187°C. It is used primarily in chemical processing and as a chemical intermediate.

Eastman cellulose acetate (CA-398-3)

Eastman Cellulose Acetate CA-398-3 is one of the lower viscosity solution grades of cellulose acetate with an average ASTM viscosity of 3 seconds. Blended with appropriate solvents, plasticizers, and other modifying resins, it is used in coatings formulations for a variety of substrates. This multipurpose rheology enhancer provides high strength and good resistance to ultraviolet light, heat, oils and greases.

Eastman cellulose acetate (CA-398-6)

Eastman Cellulose Acetate CA-398-6 is a low-viscosity solution grade cellulose acetate supplied in the form of fine, dry, free-flowing powder.

Eastman cellulose acetate (CA-398-10)

Eastman Cellulose Acetate CA-398-10 is a low-viscosity solution grade of cellulose acetate.

Eastman cellulose acetate propionate (CAP-482-0.5)

Eastman™ Cellulose Acetate Propionate CAP-482-0.5 is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats.

Eastman cellulose acetate butyrate (CAB-553-0.4)

Eastman cellulose acetate butyrate CAB-553-0.4 is soluble in low molecular weight alcohols as well as other common organic solvents. It has alcohol solubility with excellent compatibility and pigment-wetting characteristics. High hydroxyl content allows a high level of crosslinking. It will produce colorless films with good ultraviolet stability and is supplied as dry, free-flowing powder, offering maximum formulating convenience and flexibility.

Eastman Tritan Renew TX1000-25 copolyester

Eastman Tritan™ Renew TX1000-25 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan™ Renew TX1000-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Treva Engineering Bioplastic TR6012FPNAT Natural

Eastman Treva™ TR6012FPNAT Natural is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Renew Engineering Bioplastic GC6021-71 - Clear

Eastman TREVA™ Renew engineering bioplastic TR6021-71 Natural is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Renew Engineering Bioplastic OP6026-71 - Clear

Eastman TREVA™ Renew engineering Bboplastic OP6026-71 Clear is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact. Renew polymers enable a brand to reduce consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.

Treva Renew Engineering Bioplastic GC6021NAT-71 - Natural

Eastman TREVA™ Renew engineering bioplastic GC6021 Natural is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Renew Engineering Bioplastic OP6026NAT-71 - Natural

Eastman TREVA™ Renew engineering bioplastic OP6026-71 Natural is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Renew Engineering Bioplastic GC6011NAT-75 - Natural

Eastman TREVA™ Renew engineering bioplastic GC6011-75 Natural is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Renew Engineering Bioplastic TR6021NAT-71 - Natural

Eastman TREVA™ Renew engineering bioplastic TR6021-71 Natural is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Treva Renew Engineering Bioplastic TR6021-71 - Clear

Eastman TREVA Renew Engineering Bioplastic TR6021-71 Clear is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Eastman Tritan Renew TX1000-50 copolyester

Eastman Tritan™ Renew TX1000-50 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Eastman Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1000-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1000-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Eastman Tritan Renew TX1001-50 copolyester

Eastman Tritan™ Renew TX1001-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX1001-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1001-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1001-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Eastman Tritan MXF421HF-19164FC copolyester

Eastman Tritan MXF421HF copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF421HF has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF421HF has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability to fill complex parts. Tritan MXF421HF contains a mold release derived from vegetable-based sources.

Tenite Renew Propionate 380A4000010 - Clear - Trsp 68

Tenite™ Renew cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel.

Tenite Renew Propionate 380A4000018 - Clear - Trsp 62

Tenite™ Renew cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel.

Tenite Renew Propionate 383A2R30011 - Natural - Trsp 24

Eastman Tenite™ Renew Cellulose Acetate Propionate 383-11 contains a mold release and has a plasticizer level of 11%.

Tenite Renew Propionate 383A4000011 - Clear - Trsp 24

Tenite™ Renew cellulose acetate propionate 383-11 contains a mold release and has a plasticizer level of 11%.

Eastman Eastek 1400 polymer dispersion

Eastek(TM) 1400 polymer dispersion is a 100% sulfopolyester.

Eastman Tritan MXF321 copolyester

Eastman Tritan MXF321 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF321 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF321 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan MXF321 contains a mold release derived from vegetable based sources.

Eastman Tritan MXF421 copolyester

Eastman Tritan™ MXF421 copolyester has been formulated for medical devices and meets UL94 V2 compliance at 1.5 mm. Tritan MXF421 has passed ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity. Tritan MXF421 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability to fill complex parts. Tritan MXF421 contains a mold release derived from vegetable-based sources.

Stabilizer TMR

Eastman™ Stabilizer TMR is used in total mixed ration (TMR) for cattle to prevent heating due to microbial growth and to prevent nutrient losses.

Treva Engineering Bioplastic TR6011NAT - Natural

Eastman TREVA™ TR6011 Natural is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Eastman Cristal Renew 400-50 copolyester

Eastman Cristal™ Renew copolyester 400-50 is a high flow product. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew 401-50 copolyester

Eastman Cristal™ Renew 401-50 copolyester is a high flow product that contains mold release for ease of ejection. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew AN001-30 copolyester

Eastman Cristal™ Renew copolyester AN001-30 Natural has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities.

Eastman Cristal Renew CN015-25 copolyester

Eastman Cristal™ Renew copolyester CN015-25 Natural is a high flow product that contains a mold release to provide ease of demolding.

Eastman Cristal Renew CN005-25 copolyester

Eastman Cristal™ Renew copolyester CN005-25 Natural is a high flow product. Designed specifically for the unique requirements of luxury cosmetic packaging, our premier PCTA copolyester delivers unsurpassed color and clarity and a capability to mold thick parts with superior gate aesthetics.

Eastar Renew BR003-30 Copolyester - Natural

Eastman Eastar™ Renew BR003-30 copolyester is a brilliantly clear copolyester for toothbrushes specifically designed for brands and manufacturers who demand a more sustainable plastic material. Eastar™ Renew BR003-30 copolyester is identical in clarity, resistance to toothpaste and mouthwash, and in processing ease to Eastar™ BR003, which oral care brands around the world have come to count on for their simple and complex toothbrush designs.

Eastman Tritan Renew TX2001-50 copolyester

Eastman Tritan™ Renew TX2001-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX2001-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX2001-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Eastman Tritan Renew TX1501HF-50 copolyester

Eastman Tritan™ Renew TX1501HF-50 is a high flow grade of Eastman Tritan. Tritan Renew TX1501HF-50 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1001, as well as Tritan Renew TX1001-25 and TX1001-50. Tritan Renew TX1501HF-50 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TX1501HF-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1501HF-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Eastar Renew GN071-30 Copolyester - Natural

Eastar™ Renew GN071-30 copolyester is a sustainable, clear copolyester used in a variety of packaging and consumer product applications, including food and beverage packaging, general-purpose packaging, flexible film packaging, and consumer products.

Eastar Renew EN076-30 Copolyester

Eastar™ Renew EN076-30 copolyester is a sustainable, clear copolyester used in a variety of packaging and consumer product applications, including food & beverage packaging, general purpose packaging, flexible film packaging, and consumer products. It is fully compatible with the resin identification code 1 (RIC1) recycle stream. Eastar™ Renew EN076-30 copolyester enables fast-moving consumer goods brand owners to achieve recyclable products and packaging, reduce consumption of fossil-based resources, and replace materials of concern without sacrificing aesthetics or quality.

Formic Acid - 99 Feed

Eastman™ Formic Acid 99 Feed is a liquid preservative to protect feeding stuffs against deterioration caused by a broad spectrum of micro-organisms.

BioSustane SAIB NF

Eastman BioSustane SAIB NF pharmaceutical excipient is a high viscosity liquid depot for extended drug delivery in enteral, parenteral, and topical applications.

Eastman RP100 Performance Additive

EASTMAN RP100 Performance Additive is an extremely low odor, low emission and multi-functional product for broad sport surface applications. It is compatible with a wide variety of binders and formulations to provide superior viscosity reduction. It enables application easiness of variable sport surface formulas while providing better defoaming,levelling and a solution to resolve low temperature application constraints. It is capable of improving sport surface mechanical performance while achieving good balance between elasticity and strength.

Eastman Cristal EN067 copolyester

Eastman Cristal™ copolyester EN067 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin. This product is suitable for thinner-walled molded parts for the cosmetics and personal care market.

Eastman Tritan Renew VX401-50 copolyester

Eastman Tritan™ Renew VX401-50 is an amorphous copolyester with excellent clarity and impact resistance. The outstanding chemical resistance, hydrolytic stability, and ease of processing make Tritan Renew VX401-50 an ideal candidate for a broad spectrum of optical applications.

Eastman Cristal EN076 copolyester

Eastman Cristal™ EN076 copolyester is recommended for a variety of applications including thick-walled containers that are prevalent in the cosmetics and personal care markets. This copolyester offers good processability with the benefits of glass such as high clarity, brightness, and good color.

Eastman Cristal EB062 copolyester

Eastman Cristal™ EB062 copolyester is a resin specifically developed for extrusion-blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Cristal EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications.

Eastman Cristal AN014 copolyester

Eastman Cristal™ copolyester AN014 Natural is a high flow product that contains a mold release. Other outstanding features of Eastman Cristal™ copolyester AN014 Natural are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. Eastman Cristal™ copolyester AN014 Natural is approved for food contact. Eastman Cristal™ copolyester AN014 Natural flow lengths are increased 20-40% relative to Eastman Cristal™ copolyester AN004 as shown by spiral flow testing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Eastman Cristal™ copolyester AN014 Natural may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240.

Eastman Cristal AN004 copolyester

Eastman Cristal™ copolyester AN004 Natural contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Its processability coupled with its outstanding chemical resistance makes it well suited for thick-wall applications.

Eastman Cristal CN015 copolyester

Eastman Cristal™ copolyester CN015 Natural is a high flow product that contains a mold release to provide ease of demolding.

Eastman Cristal CN005 copolyester

Eastman Cristal™ copolyester CN005 is a high flow product. Designed specifically for the unique requirements of luxury cosmetic packaging, our premier PCTA copolyester delivers unsurpassed color and clarity and a capability to mold thick parts with superior gate aesthetics.

Propcorn Feed LP3 NC

Eastman Propcorn Feed LP3 NC is a non-corrosive propionic acid-based liquid product for aerobic preservation against molds in feedstuffs.

Acitra LG1

Eastman Acitra<sup>TM</sup> LG1 has a preservative effect and prevents the growth of harmful bacteria in the feed and improves the quality and shelf life.

Acitra LH1 - NL

Eastman Acitra LH1 preserves compound feeds and raw materials and prevents recontamination with microorganisms.

Propcorn Feed LP2 NC

Eastman Propcorn Feed LP2 NC is a non-corrosive propionic acid-based liquid product for aerobic preservation against molds in feedstuffs.

Advantex AR

Eastman Advantex(TM) AR is a clear to light yellow liquid with an amine-like odor. The freshly distilled product is colorless, but prolonged storage may cause a yellowish discoloration.

Eastman Cristal Renew 400-30 copolyester

Cristal™ Renew copolyester 400-30 is a high flow product. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew 401-30 copolyester

Eastman Cristal™ Renew copolyester 401-30 Natural is a high flow product that contains mold release for ease of ejection. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew EB062-50 copolyester

Eastman Cristal™ Renew EB062-50 copolyester is a resin specifically developed for extrusion blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Cristal EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications.

Eastman Cristal Renew EN067-30 copolyester

Eastman Cristal™ Renew copolyester EN067-30 is a copolyester designed to be fully compatible with the PET recycling stream.

Eastman Cristal Renew EN067-50 copolyester

Cristal™ Renew copolyester EN067-50 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin.

Acitra SG1

Eastman Acitra<sup>TM</sup> SG1 prevents the feed against deterioration by micro-organisms and improves the quality and shelf-life of the feed.

Acitra SG2

Eastman Acitra<sup>TM</sup> SG2 prevents the growth of harmful bacteria in the feed and improves the quality and shelf life.

Acitra Plus SG3

Eastman Acitra<sup>TM</sup> Plus SG3 prevents the feed against deterioration by microorganisms and improves the quality and shelf life of the feed.

Acitra SH1

Eastman Acitra<sup>TM</sup> SH1 preserves compound feeds and raw materials and prevents recontamination micro-organisms.

Acitra LH3 Na

Eastman Acitra LH3 Na is a buffered liquid blend, especially developed for grain treatment, for storage times up to 12 months.

Acitra LH2 Na

Eastman Acitra<sup>TM</sup> LH2 Na is a buffered, liquid product to preserve feedstuffs from harmful microorganisms.

Acitra LG2 Na

Eastman Acitra<sup>TM</sup> LG2 Na has a preservative effect, prevents the growth of harmful bacteria in the feed and improves the quality and shelf life.

Acitra LG5 Na - FI

Eastman Acitra<sup>TM</sup> LG5 Na is a buffered, liquid product to control bacteria especially in fur animal feeds and slaughterhouse by-products.

Acitra LF20 Na

Eastman Acitra<sup>TM</sup> LF20 Na is a liquid preservative for controlling harmful microorganisms in feedstuffs acting against a broad spectrum of microorganisms.

Acitra LG5 Na - NL

Eastman Acitra<sup>TM</sup> LG5 Na is a buffered, liquid product to control bacteria especially in fur animal feeds and slaughterhouse by-products.

Protaq LL2

Eastman Protaq<sup>TM</sup> LL2 is a complementary feed to be used via water for drinking for poultry, pigs and rabbits.

Eastman Tetrashield MP2104

MP2104 formulations are designed for gold-coated 3-piece cans and bodies with sanitary or easy-open ends for both easy-to-hold and hard-to-hold foods and beverages. Resin provides improved functionality to benefit gold phenolic coatings and offers broad formulation latitude.

Eastman Cristal One Pro

Eastman Cristal™ One Pro is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to approximatively 12mm), while maintaining clarity and color.

Eastman Cristal One

Eastman Cristal™ One is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough and exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal One is recommended for thicker luxury bottles with complex shapes.

Acitra LF10 Na - FI

Eastman Acitra™ LF10 Na is a liquid preservative to protect feeding stuffs against deterioration caused by a broad spectrum of microorganisms.

Acitra LF10 Na - NL

Eastman Acitra™ LF10 Na is a liquid preservative to protect feeding stuffs against deterioration caused by a broad spectrum of microorganisms.

Acitra LF30 Na

Eastman Acitra<sup>TM</sup> LF30 Na is a liquid preservative to protect feeding stuffs against deterioration caused by a broad spectrum of microorganisms.

Eastman Tritan Renew VX301-50 copolyester

Tritan™ Renew VX301-50 is an amorphous copolyester with excellent clarity and impact resistance. The outstanding chemical resistance, hydrolytic stability, and ease of processing make Tritan™ Renew VX301-50 an ideal candidate for optical applications such as eyewear frames.

Eastman Cristal One Renew 50

Eastman Cristal™ One Renew-50 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One is recommended for thicker luxury bottles with complex shapes.

Eastman Cristal One Pro Renew 50

Eastman Cristal™ One Pro Renew-50 is a copolyester designed to be fully compatible with the PET recycling stream.

GBM Performant

GBM Performant is a free flowing, dust free complementary feed containing fat coated butyrate that helps improve zootechnical performance and supports metabolism.

GBM Enhanced

GBM Enhanced is a free flowing, dust-free premixture of fat coated butyrate and other functional ingredients. GBM Enhanced maintains an optimal gut health and butyrate content helps improve the feed conversion ratio and supports a healthy metabolism

GBM Enhanced T

GBM Enhanced T is a free-flowing complementary feed containing encapsulated calcium butyrate that helps improve zootechnical performance and supports metabolism. In addition it also contains calcium lactate and chestnut extract.

GBM Microclassic

GBM Microclassic is a free flowing, dust-free complementary feed containing micro granulated calcium butyrate that helps improve zootechnical performance and supports metabolism.

Eastman Cristal Renew EN076-30 copolyester

Eastman Cristal™ Renew copolyester EN076-30 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin.

Eastman Cristal Renew EN076-50 copolyester

Eastman Cristal™ Renew copolyester EN076-50 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin.

Eastman Cristal Renew CN015-75 copolyester

Eastman Cristal™ Renew copolyester CN015-75 Natural is a high flow product that contains a mold release to provide ease of demolding.

Eastman Cristal Renew AN004-80 copolyester

Eastman Cristal™ Renew copolyester AN004-80 Natural contains a mold release. It has an excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. These features make it well suited for thick-wall applications.

Eastman Cristal Renew AN014-80 copolyester

Eastman Cristal™ Renew Copolyester AN014-80 Natural is a high flow product that contains a mold release.

Eastman Cristal Renew AN001-50 copolyester

Eastman Cristal™ Renew copolyester AN001-50 Natural has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities.

Eastman Cristal Renew AN001-80 copolyester

Eastman Cristal™ Renew copolyester AN001-80 Natural has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities.

Eastman Cristal Renew CN015-30 copolyester

Eastman Cristal™ Renew copolyester CN015-30 Natural copolyester is a high flow product that contains a mold release to provide ease of demolding.

Eastman Eastobond Renew 19412-100 copolyester

Eastman Eastobond™ Renew copolyester 19412-100 is a plastic lidding film resin designed to adhere directly to monolayer PET food trays, rendering them recyclable.

Triacetin Renew 59

Eastman Triacetin Renew 59 is used as a plasticizer for cellulosic resins and is compatible in all proportions with cellulose acetate, nitrocellulose, and ethyl cellulose. It is useful for imparting plasticity and flow to laminating resins, particularly at low temperatures, and is also used as a plasticizer for vinylidene polymers and copolymers. Eastman Renew plasticizers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency that tracks sustainable content in a variety of industries.

Propcorn Feed LP4 NC

Eastman Propcorn Feed LP4 NC has a strong anti- mold effect in the compound feeds and raw materials and helps to prevent formation of mycotoxins during storage

Eastman 168 Renew 20 Non-Phthalate Plasticizer

Eastman 168™ Renew 20 non-phthalate plasticizer performs as good as or better than most ortho-phthalate plasticizers. In general-purpose plasticizer applications, it offers good performance properties, excellent low-temperature flexibility, resistance to extraction by soapy water, and excellent nonmigration properties. Eastman Renew plasticizers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency that tracks sustainable content in a variety of industries. Renew plasticizers are produced with ISCC-certified circular content by mass balance allocation.

Eastar copolyester 6763 Renew-50

Eastar™ Renew copolyester 6763-50 meets ISO 10993 and/or USP Class VI biocompatibility requirement.

Acitra LH1 - FI

Eastman Acitra<sup>TM</sup> LH1 preserves compound feeds and raw materials and prevents recontamination with microorganisms.

DOA Renew 20 Plasticizer

Eastman DOA Renew 20 plasticizer (bis(2-ethylhexyl) adipate) is a light-colored, oily liquid generally used as a plasticizer for PVC. It features flexibility at low temperatures, good electrical properties, resistance to weathering, and heat stability. Eastman Renew plasticizers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency that tracks sustainable content in a variety of industries. Renew plasticizers are produced with ISCC-certified circular content by mass balance allocation.

Eastar Renew GN071-100 Copolyester - Natural

Eastar™ Renew GN071-100 copolyester is a sustainable, clear copolyester used in a variety of packaging and consumer product applications, including food and beverage packaging, general-purpose packaging, flexible film packaging, and consumer products.

Eastman Cristal One Renew 100

Eastman Cristal™ One Renew-100 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging that is tough, exhibits good chemical resistance and contains 100% certified recycled content*. It is suitable for molding thick-walled transparent containers or parts (up to 9mm thickness), while maintaining clarity and color. For ISBM applications, Cristal™ One is recommended for thicker luxury bottles with complex shapes.

Eastman Cristal Renew CN015-50 copolyester

Eastman Cristal™ Renew CN015-50 Natural copolyester is a high flow product that contains a mold release to provide ease of demolding.

Eastman Cristal One Pro Renew 100

Eastman Cristal™ One Pro Renew-100 is a copolyester designed to be fully compatible with the PET recycling stream.

Keitex BC

Eastman Keitex BC is a blend of organic acids that preserves and acidifies complete swine feed and complete poultry feed and prevents recontamination with micro-organisms.

DuraStar Polymer DS1900HF - Natural

DuraStar™ Polymer DS1900HF Natural polymer is a high flow grade of DuraStar™. Outstanding features of DuraStar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools.

DuraStar Polymer MN630

DuraStar™ Copolyester MN630 does not contain a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. It is easy to process with minimal drying time and has good toughness and chemical resistance.

Eastar AN014 Copolyester - Natural

Eastar™ AN014 copolyester is a high flow product that contains a mold release. Other outstanding features of Eastar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. Eastar™ AN014 is approved for food contact. Eastar™ AN014 flow lengths are increased 20-40% relative to Eastar™ AN004 as shown by spiral flow testing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Eastar™ AN014 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240.

DuraStar Polymer MN631 -Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>DuraStar™ Copolyester MN631 contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. Other features include toughness and chemical resistance. It is easy to process with minimal drying time and has good toughness and chemical resistance.

EastaPure - DB Solvent (DEGBE or Diethylene glycol monobutyl ether)

Eastman EastaPure™ DB Solvent is a high boiling, slow evaporating glycol ether providing low trace metals content for sensitive electronic applications.

Adhesion Promoter - 550-1 (25% in Aromatic 100)

AP 550-1 (25% in Aromatic 100) is a nonchlorinated polyolefin for improved coating adhesion on TPO and PP. It allows the formulation of melamine-cured systems with excellent performance properties previously only available in 2K systems.

DuraStar Polymer DS1910HF - Natural

DuraStar™ Polymer DS1910HF, Natural polymer contains a mold release. It has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. Easy to process, it flows readily, fills intricate molds, and is well suited for thick-wall applications.

Neostar Elastomer FN005

Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether for use in flexible packaging and tubing applications as well as some automotive and profile applications. Target inherent viscosity is 1.05.

Neostar Elastomer FN006

Eastman Neostar™ Elastomer FN006 is a tough, clear, durable, general purpose grade copolyester ether for use in flexible packaging and tubing applications as well as some automotive and profile applications. Target inherent viscosity is 1.6.

Neostar Elastomer FN007

Eastman Neostar™ FN007 elastomer is a tough, clear, durable, general purpose grade copolyester ether for use in flexible packaging and tubing applications as well as some automotive and profile applications. Target inherent viscosity is 1.23.

Chlorinated Polyolefin - 730-1 - 20% Solids in Xylene

This product is a 20% solid solution of Chlorinated Polyolefin 730-1 in Xylene. It is an efficient adhesion promoter in primers to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) substrates. It has excellent humidity and gasoline resistance and superior high temperature performance.

DuraStar Polymer DS2000 - Natural

DuraStar™ Polymer DS2000, Natural polymer has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. Easy to process, it flows readily and fills intricate molds.

Chlorinated Polyolefin - 730-1 - 20% Solids in Aromatic 100

This product is a 25% solid solution of Chlorinated Polyolefin 730-1 in Aromatic 100. It is an efficient adhesion promoter in primers to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) substrates. It has excellent humidity and gasoline resistance and superior high temperature performance.

DuraStar Polymer MN610 - Natural

DuraStar™ Polymer MN610 Natural polymer has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics. This product does not contain a mold release.

Provista Copolymer MP001

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Provista™ Copolymer MP001 is a resin specifically developed for extrusion into profiles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes.

Eastar A150 Copolyester

Eastar™ A150 is intended primarily for extrusion into film and sheeting for packaging applications. It has excellent hydrolytic stability and good heat stability.

Eastar BR203 Copolyester - Natural

Eastar™ BR203 copolyester has excellent appearance and is nearly water clear. With superior chemical resistance, it maintains its physical properties and appearance when exposed to aromatic oils. BR203 is specifically formulated to provide the optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes.

Eastman cellulose acetate (CA-398-10NF/EP)

Eastman™ Cellulose Acetate (CA-398-10NF/EP) is a low viscosity solution grade of cellulose acetate.

Eastar DN010 Copolyester

Eastar™ DN010 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN010 contains no mold release.

Eastar DN011 Copolyester

Eastar™ DN011 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN011 contains a mold release.

Eastalloy Polymer DA510 - Natural

Eastalloy™ Polymer DA510 is a clear copolyester/polycarbonate alloy. This product has good impact strength, chemical resistance, heat resistance, dimensional stability, and low mold shrinkage.

Eastar MN004 Copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ MN004 Copolyester contains a mold release to improve ejection. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates.

Eastar DN001HF Copolyester

Eastar™ Copolyester DN001HF has excellent flow characteristics while maintaining superior mechanical properties. It is easy to process and has exceptional clarity, toughness, and chemical resistance.

Copolyester 1223

Eastman™ copolyester 1223 is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques including film and sheet extrusion.

Eastar MN005 Copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ Copolyester MN005 has excellent appearance and is nearly water-clear. It is easy to process and can fill intricate tools. Its most outstanding features are exceptional clarity, toughness, radiation resistance, chemical resistance and excellent color and property retention following gamma and e-beam sterilization. MN005 contains a mold release.

EastaPure - PM Acetate - Stabilized (PGMEA or propylene glycol monomethyl ether acetate)

Eastman EastaPure™ PM Acetate, Stabilized is manufactured for semiconductor and electronics applications. It is a high-purity solvent which provides greater protection against organic peroxide formation.

Propionic Acid P Grain and Hay Preservative

EASTMAN Propionic Acid P Grain and Hay Preservative, which has been registered with the Environmental Protection Agency (EPA) as a pesticide and is marketed as a grain and hay preservative.

Eastman Spectar clear copolyester

Eastman Spectar™ Clear copolyester offers the thermoformability and ease of fabrication of Eastman Spectar™ copolyester along with significantly improved clarity and high notch impact strength.

Hydroxypivalyl Hydroxypivalate (HPHP) Glycol

Eastman™ HPHP Glycol is a difunctional ester-glycol used for manufacturing polyester resins for the powder, coil, and automotive coatings market. The cast solid form is shipped in drums requiring a hot room or drum heater to melt the contents for removal.

Drystar 0827 Copolyester

Drystar™ 0827 Copolyesters display an excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters.

Drystar 0601 Copolyester

Drystar™ 0601 Copolyesters display an excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters.

Drystar 0603 Copolyester

Drystar™ 0603 Copolyesters display an excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters

Drystar 0325 Copolyester

Drystar™ 0325 Copolyesters display an excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters.

Tenite Butyrate 285E0V16304 - Clear - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. Tenite™ Cellulose Acetate Butyrate 285-04 contains an odor mask and has a plasticizer level of 4%.

Eastar MB002 Copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ copolyester MB002 is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness, and chemical resistance, are desirable.

Provista Copolymer MP002

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Provista™ Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and enhanced toughness, drive demand.

Provista Copolymer ST

Eastman Provista™ Copolymer ST is a resin specifically developed for profile extrusion where high clarity and gloss, toughness, and processability are critical.

Eastar EN052 Polyester

Eastar™ Polyester EN052 is a thermoplastic condensation homopolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.

Eastar MN052 Polyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><br> Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics.

Eastman Cadence GS5 copolyester

Eastman Cadence™ GS5 is the top-of-the-line copolyester resin for calendered film applications including decorative laminates, general purpose packaging, transaction and identification cards, and protective films. It has superior processing ease and speed compared to Cadence™ GS2 and GS3.

Eastman Optifilm 300 enhancer

Eastman Optifilm™ enhancer 300 is a low odor, coalescent that is safe, efficient and nonyellowing. Used in a variety of latex types, it is also compatible with solvent borne resins, improving the rheology, flexibility, and adhesion of coatings based on these resins. Eastman Optifilm™ enhancer 300 is VOC-exempt under the European Union Decopaint directive and Solvent Emissions Directive, the Australian Paint Approval Scheme.<br> Useful for preparing low viscosity weatherable PVC coil coatings. Coalescing aid with low volatility and excellent application properties. Excellent properties with associative thickeners.

Eastman Optifilm 400 enhancer

Eastman Optifilm™ enhancer 400 is a low odor coalescent that is compatible with a variety of latex types, and it does not significantly contribute to the VOC content of paints.

Eastman cellulose acetate (CA-320S NF/EP)

Eastman™ Cellulose Acetate (CA-320S NF/EP) is a low acetyl content of CA. CA-320S NF/EP is commonly used in osmotic drug delivery and taste-masking.

Eastman Embrace high-yield HY1000 compound

Eastman Embrace™ High Yield is combined with Eastman Embrace™ LV copolyester to create a white opaque microvoided shrinkable film. Embrace High Yield has a density below 1.0 g/cc with a high ultimate shrinkage up to 70%.

Eastman Cadence ADD5 copolyester

Release additives are required to calendar Eastman Cadence™ materials.

Eastar MN006 Copolyester - Natural

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization.

N-Propyl Propionate

Eastman™ n-Propyl Propionate is a non-HAP, medium evaporating, urethane grade solvent with good activity for most coating resins.

Eastar DN114 Copolyester - Natural

Eastar™ DN114 contains an ultraviolet light inhibitor and a mold release.</p>

TXIB Formulation Additive

Eastman TXIB™ formulation additive is the lowest viscosity additive available to the flexible PVC industry, making this material particularly suitable for PVC plastisols and often allows adding additional fillers to the plastisol, resulting in a cost savings.

EEP Solvent (Ethyl 3-Ethoxypropionate)

Eastman™ EEP (Ethyl 3-Ethoxypropionate) is slow evaporating with excellent activity for a wide range of coating polymers. It has moderate odor, low surface tension, and high electrical resistance. Its unique structure provides a variety of desirable properties not found in other solvents.

Tenite Butyrate 572E3720012 - Clear - Trsp

™Tenite™ Cellulose Acetate Butyrate 572-12 contains an odor mask lubricant and an ultra-violet inhibitor(UVI). It has a plasticizer level of 12%.

Diphenyl Oxide - Refined

Applications for diphenyl oxide fluid include process media, raw materials, or solvents in many industries, including chemicals, fragrances, and petrochemicals.

HB-40

Applications for HB-40 process fluid include process media or solvents in many industries, including chemicals and petrochemicals. HB-40 can be used as an ingredient in plastics and coatings.

HB-40/00

Applications for HB-40/00 process fluid include process media or solvents in many industries, including chemicals and petrochemicals.

MCS 2361

MCS 2361 is an industrial phosphate ester fluid. It is used in fire department rescue equipment, where fire resistance is an essential attribute.

MCS 2780

MCS-2780 may be used as process media or solvents in many industries, including chemicals, petrochemicals, polymers, coatings, photography, and applications where an environmentally friendly solvent is needed.

MCS 2805

Applications for MCS 2805 include process media or solvents in many industries, including chemicals, petrochemicals, polymers, inks, and coatings.

MCS 2806

Applications for MCS 2806 include process media or solvents in the chemical industry.

MCS 2808

Applications for MCS 2808 include process media or solvents in many industries, including chemicals and petrochemicals industries.

MCS 2809

Applications for MCS 2809 process fluid include process media or solvents in many industries, including chemicals and petrochemicals.

MCS 2810

Applications for MCS 2810 process fluid include process media or solvents in many industries, including chemicals and petrochemicals.

MCS 352B

MCS-352B is a viscous assembly lubricant for components and equipment designed to use Skydrol aviation hydraulic fluids. This product is only supplied through distributors. North America region inquiries can be directed to TBM and Europe region inquiries to Boeing Distribution Services. Both distributors are authorized to repackage and distribute MCS-352B within their respective regions. Refer to the distributor listing on www.Eastman.com/Aviation for their contact information.

Therminol 55 Heat Transfer Fluid

Therminol 55 is a synthetic heat transfer fluid used in moderate-temperature applications. Therminol 55 fluid is designed for use in nonpressurized/low-pressure, indirect heating systems. It delivers efficient, dependable, uniform process heat with no need for high pressures.

Therminol 59 Heat Transfer Fluid

Therminol 59 is a synthetic heat transfer fluid with excellent low temperature pumping characteristics and thermal stability.

Therminol 62 Heat Transfer Fluid

Therminol 62 is a synthetic heat transfer fluid whose chemistry is custom contoured for high-performance, high-purity, low-pressure and exceptional thermal stability.

Therminol 66 Heat Transfer Fluid

Therminol 66 is the world’s most popular high temperature, liquid-phase heat transfer fluid. Therminol 66 is pumpable at low temperatures, and offers high-temperature thermal stability.

Therminol 68 Heat Transfer Fluid

Therminol 68 is a high temperature liquid phase heat transfer fluid with excellent thermal stability. Therminol 68 was developed for use at temperatures up to 360° C (680°F) in liquid phase heat transfer fluid systems. Therminol 68 has a boiling point of 308°C (586°F), but static pressure of about 2 bar should maintain the liquid phase at high temperatures.

Therminol 72 Heat Transfer Fluid

Therminol 72 is an ultra-high temperature liquid phase heat transfer fluid having excellent thermal stability. Therminol 72 was developed for use at temperatures up to 380°C (720°F) in liquid phase heat transfer systems.

Therminol 75 Heat Transfer Fluid

Therminol 75 synthetic heat transfer fluid is a ultra-high temperature liquid phase heat transfer fluid having excellent thermal stability.

Therminol ADX-10 Heat Transfer Fluid

Therminol ADX10 is a low viscosity, synthetic organic heat transfer fluid particularly recommended for indirect liquid phase process heating at medium temperatures.

Therminol D-12 Heat Transfer Fluid

Therminol D-12 is a synthetic, liquid phase heat transfer fluid with excellent heat transfer properties over a wide temperature range. This fluid is ideally suited for applications that require efficient cooling and heating.

Therminol FF (Flush Fluid)

Therminol FF is the first synthetic flushing fluid for liquid phase heat transfer systems. Deposits from oxidized, thermally degraded or contaminated fluid can foul interior surfaces, making it necessary to clean the system prior to charging with new fluid.

Therminol SP Heat Transfer Fluid

Therminol SP is a synthetic heat transfer fluid used in moderate-temperature applications. Therminol SP fluid is designed for use in nonpressurized/low-pressure, indirect heating systems. It delivers efficient, dependable, uniform process heat with no need for high pressures.

Therminol VP-1 Heat Transfer Fluid

Therminol VP-1 heat transfer fluid is an ultra-high temperature synthetic heat transfer fluid designed to meet the demanding requirements of vapor phase systems or liquid phase systems.

Therminol VP-3 Heat Transfer Fluid

Therminol VP3 heat transfer fluid is a synthetic heat transfer fluid that was specially developed to allow vapor phase heat transfer at lower temperatures than are practical with traditional diphenyl oxide (DPO)/biphenyl constituted fluids like Therminol VP-1.

Therminol XP Heat Transfer Fluid

Therminol XP heat transfer fluid is an extremely pure white mineral oil which provides reliable heat transfer.

MCS 2811

Applications for MCS 2811 process fluid include process media or solvents in many industries, including chemicals and petrochemicals.

MCS 2812

Applications for MCS 2812 include process media or solvents in many industries, including chemicals and petrochemicals.

Therminol LT Heat Transfer Fluid

Therminol LT is a synthetic aromatic heat transfer fluid. It can be used in both liquid and vapor phase, and has excellent heat transfer and fluid properties for low-temperature applications.

Eastman Cristal 400 copolyester

Cristal™ 400 copolyester is a high flow product. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal 401 copolyester

Cristal™ 401 copolyester is a high flow product that contains mold release for ease of ejection. It is designed and engineered specifically for cosmetics packaging applications.

Diphenyl Oxide

Applications for diphenyl oxide process fluid include process media, raw materials, or solvents in many industries, including chemicals, fragrances, and petrochemicals.

Eastman Eastalite MP007F copolyester

Eastalite™ Foamed Copolyester MP007F with nonporous Eastar™ Copolyester 6763 skins is an opaque, amorphous material with a closed foam structure useful for medical packaging.

Para-Terphenyl

<i>p</i>-Terphenyl is a specialty material and may be used in ionized radiation detectors, nonpolar laser dye, and single molecule optical probe of scanning near-field microscopy.

Turbo Oil 25

Eastman Turbo Oil 25™ is a high load-carrying gas turbine oil, for the most demanding gear applications.

Eastman Tritan LX500 copolyester

Eastman Tritan™ LX500 is an amorphous copolyester specifically developed for use in blow molding applications for the cosmetic, fragrance, and personal care markets.

Effusion Plasticizer

Eastman Effusion™ plasticizer is a high solvating non-phthalate plasticizer that provides lower plastisol viscosity, excellent low temperature flexibility and fusion rates similar to typical high solvating plasticizers in vinyl formulations.

Versafix Plasticizer

<table width=640><tr><td>Eastman Versafix™ is a plasticizer designed especially for water-based adhesives applications.</td></tr></table>

Acetic Acid - Glacial - Low Metals

Acetic Acid is a raw material used for the production of many downstream products.

Eastman Tritan MXF121 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MXF121 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Tritan MXF121 has been formulated for medical devices.

Turbo Oil 2197

Eastman Turbo Oil 2197™ is designed to exceed the demand of current and future turbine engines. With over 400 million hours of in-flight experience, it is by far the most widely used HTS fleet oil in the world. Turbo Oil 2197 is manufactured in our own facility so you can rely on consistently high quality wherever you are in the world.

Turbo Oil 2380

Eastman Turbo Oil 2380™ is still one of the most widely used turbine oils in the commercial aviation industry. It was one of the first turbine oils to be qualified and approved for Mil-PRF-23699 STD (Standard) class and subsequently SAE AS5780 SPC (Standard Performance Capability) class.

Turbo Oil 2389

Eastman Turbo Oil 2389™ is a low viscosity gas turbine oil, offering exceptional cold-start capability.

HALO 157

Eastman HALO 157™ is a clear amber colored fluid with a faintly aromatic odor reminiscent of turbine engine oils. It is based on selected polyol esters, the inherent characteristics of which are enhanced by additives. also fully compatible and miscible with other oils approved to speciifcations, MIL-PRF-23699 and MIL-PRF-7808.

Eastman Spectar Stratus C100 copolyester

Spectar Stratus copolyester was formulated specifically for the lighting market. Spectar Stratus brings your projects to light with excellent diffusion and high light transmission and superb processability with a low thermoforming temperature, no need to pre-dry before thermoforming, ease of cutting, and cold bending capability.

Films - Dyed and/or Metallized PET - With PS Adhesive

These products are PET-based solar control window films with a pressure sensitive mounting adhesive and a clear release liner intended for smooth glass surface applications.

Films - Dyed and/or Metallized PET - With CDF Adhesive

These products are PET-based solar control window films with a CDF (clear distortion-free) mounting adhesive and a clear release liner intended for smooth glass surface applications.

Films - Safety and Security (With Pressure-Sensitive Mounting Adhesive)

These products are heavy gauge (4-15 mil) PET-based control window films with an acrylic pressure sensitive mounting adhesive and a clear release liner intended for smooth glass surface applications.

Films - With Proprietary IR Ceramic Coatings and Pressure-Sensitive Adhesive

These products are PET-based solar control window films with infrared absorbing or reflecting ceramic coatings, and a pressure sensitive mounting adhesive and a clear release liner intended for smooth glass surface applications.

Films - Urethane Paint Protection - With Pressure-Sensitive Adhesive

This product is an elastic and transparent urethane film, 6-8 mils in thickness, with a pressure sensitive mounting adhesive and a clear release liner intended for appropriate smooth surface applications as a removable and sacrificial surface protectant against sand, gravel, road debris, insects, etc.

Films - Decorative Vinyl W/ PS Adhesive

These products are vinyl-based decorative window films with a pressure sensitive mounting adhesive and a clear or paper release liner intended for smooth glass surface applications.

Eastman Tritan TXF1021 copolyester

Eastman Tritan™ TXF1021 copolyester is an amorphous, opaque material offering UL-94 V2 performance with outstanding aesthetics and gloss.

VersaBond Plasticizer

Eastman VersaBond™ is an efficient and easy replacement for phthalate-based plasticizers in polysulfide sealants for insulated glass. When compared with both phthalate and benzoate plasticizers, VersaBond has comparable or better performance for Shore A hardness, viscosity, and tensile strength.

2-Heptanol (Methyl Amyl Carbinol)

Eastman™ 2-Heptanol is a 7-carbon straight chain oxo alcohol with a slight odor and boiling point of 160°C. It is miscible with most common organic solvents and slightly soluble in water.

Eastman Tritan MP150 copolyester

Eastman Tritan copolyester MP150 is a high flow grade of Eastman Tritan. Eastman Tritan copolyester MP150 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester MP100. It is intended for use in extrusion coating processes or where high melt flow rate is desirable.

Eastman Tetrashield AC1001

Eastman Tetrashield™ protective resin AC1001 is a durable polyester resin system that improves the performance of both clearcoats and pigmented topcoats.

Methyl Isobutyl Carbinol (MIBC)

Eastman MIBC (Methyl Isobutyl Carbinol - 4-methyl-2-pentanol) is a colorless chemical compound primarily used in lube oil and mining applications.

Eastman Tritan MP200 copolyester

Eastman Tritan(TM) MP200 is an amorphous copolyester that combines excellent clarity and toughness with outstanding heat and chemical resistance.

Trimethylammonium Chloride 58% (TMA.HCl 58%)

Trimethylammonium Chloride 58% (TMA.HCl 58%) is a clear, colorless aqueous solution.

Choline Chloride - 70 Feed

Choline Chloride or (2-Hydroxyethyl) Trimethylammonium Chloride is an essential nutrient and finds its main application as a feed additive.

Taminizer CL

Taminizer™ CL (Choline Chloride 75% Feed) is produced synthetically from trimethylamine, manufactured in-house by Eastman. The complete production process is operated under strict conditions compliant with ISO 9000 and HACCP certification.

Monomethylamine 40% aqueous solution (MMA-40) - US

Monomethylamine 40% aqueous solution (MMA40) is a versatile building block that is used in a wide variety of applications.

Dimethylamine 40% aqueous solution (DMA-40) - US

Dimethylamine 40% aqueous solution (DMA40) is a versatile building block that is used in a wide variety of applications.

Dimethylamine 60% aqueous solution (DMA-60) - US

Dimethylamine 60% aqueous solution (DMA60) is a versatile building block that is used in a wide variety of applications.

Dimethylformamide (DMF)

Dimethylformamide (DMF) is a clear, colorless, hygroscopic liquid with a slight amine odor.

Chlormequat Chloride (CCC) - 64%

Chlormequat chloride 64% is a plant growth regulator inhibiting the action of the gibberellic acid, resulting in shortening and strengthening of stems in plants and reduced branching and foliage in certain species of shrubs and trees.

Chlormequat Chloride (CCC) - 66%

Chlormequat chloride 66% is a plant growth regulator inhibiting the action of the gibberellic acid, resulting in shortening and strengthening of stems in plants and reduced branching and foliage in certain species of shrubs and trees.

TMTD (Tetramethylthiuram Disulfide) C

TMTD C is widely used in rubber processing as an ultra accelerator for low-temperature cures, either alone or as an activator for other accelerators, chiefly the thiazoles

Thiram P

Thiram P (Thiram technical Phyto) is a fast-wetting phyto grade product for use in pesticide formulations.

TMTD (Tetramethylthiuram Disulfide) OT

TMTD OT is widely used in rubber processing as an ultra accelerator for low-temperature cures, either alone or as an activator for other accelerators, chiefly the thiazoles

Thiram 80 WG

Thiram 80 WG is formulated as water-dispersible granules using GRANUFLO® process.

Ziram P

Ziram P (Ziram Technical Phyto), is a fast-wetting phyto grade for use in plant protection product formulation.

ZDMC (Zinc Dimethyldithiocarbamate) OT

ZDMC (Zinc dimethyldithiocarbamate) is a creamy-white powder for use in the rubber industry.

Ziram WG

Ziram WG is formulated as water-dispersible granules using GRANUFLO&reg; process.

Metam Sodium

<b>Metam sodium is a “Restricted Use Pesticide” in the US.</b><br>Soil disinfectant for controlling nematodes, soil diseases, weeds and germinating weed seeds. The product works by fumigation. It is applied prior to seeding or planting, creating a favorable biotope that promotes healthy crop growth.

SDDC - Aqueous Solution

SDDC (Sodium Dimethyldithiocarbamate) is a yellowish aqueous solution and is used as a biocide and as a water treatment solution.

N-Methyl-2-Pyrrolidone (NMP)

N-Methyl-2-Pyrrolidone (NMP) has a good solvency for a wide range of organic and inorganic compounds and it is miscible with water at all temperatures and has a high chemical and thermal stability.

Dimethyldodecylamine (DIMLA) 1214

Dimla TM 1214 mainly contains alkyldimethylamines with chain length C12 and C14. The product is a clear to slighty yellow liquid at room temperature and has the characteristic odor of fatty amines.

Amietol - M21

Amietol™ M21 (DMAE) is a clear hygroscopic liquid with an amine-like odor. The freshly distilled product is colorless, but prolonged storage may cause a yellowish discoloration.

Dimethylacetamide (DMAc)

Dimethylacetamide (DMAc) is a colorless, high boiling, polar, hygroscopic liquid. DMAc is a good solvent for a wide range of organic and inorganic compounds and it is miscible with water, ethers, esters, ketones and aromatics compounds.

Amietol - M11

Amietol M11 (MMEA) is a clear hygroscopic liquid with an amine-like odor.

Amietol - M12

Amietol M12 (MDEA) is a clear hygroscopic liquid with an amine-like odor. The freshly distilled product is colorless, but prolonged storage may cause a yellowish discoloration.

Dimethylaminopropylamine (DMAPA)

DMAPA is a clear colorless liquid, free of suspended matter. DMAPA is completely miscible with water, alcohols, esters and ketones.

Dimethylformamide (DMF) - Peptide Grade

Dimethylformamide Peptide Grade is a clear, colorless, hygroscopic liquid.

Eastman Eastek 1000 polymer dispersion

Eastek™ 1000 polymer dispersion is a film forming polyester polymer supplied as an aqueous dispersion containing 30% polymer solids.

Dimethyl Terephthalate (DMT)

DMT is a solid at room temperature and also available in bulk molten form. It is used with glycols to make polyester and in the synthesis of polyethylene terephthalate (PET) for fiber, film, container plastics, or specialty plastics.

Dimethyl 1,4-Cyclohexanedicarboxylate (DMCD)

Eastman™ DMCD is a low-melting, cycloaliphatic diester used for the synthesis of polyester resins, polyamides, alkyds, and plasticizers in a wide variety of coatings applications. It is also used in unsaturated polyester resin gel coats for fiberglass-reinforced plastics.

1,4-Cyclohexanedimethanol (CHDM-D)

Eastman CHDM-D is a symmetrical, high molecular weight cycloaliphatic glycol used to make saturated and unsaturated polyester resins. It has also found use as a glycol modifier for resins containing Eastman NPG™ glycol. Good chemical, stain, humidity, and corrosion resistance is achieved when using CHDM-D in polyester-melamine baking enamels for appliance, general metal, and automotive coatings.

1,4-Cyclohexanedimethanol (CHDM-D90)

Eastman™ CHDM-D90 is a 90/10 weight % solution of CHDM-D in water. It is a liquid at room temperature for easier handling. This symmetrical, high molecular weight cycloaliphatic glycol is used to make saturated and unsaturated polyester resins. It is commonly used as a glycol modifier for resins containing Eastman NPG™ glycol. The 10 weight % water is removed during heating of the resin reaction mixture. Good chemical, stain, humidity, and corrosion resistance is achieved when using CHDM-D90 in polyester-melamine baking enamels for appliance, general metal, and automotive coatings. It delivers good hydrolytic stability to waterborne polyester resins.

Purified Terephthalic Acid (PTA)

Eastman™ Purified Terephthalic Acid (PTA) is a high-melting, white powder. It is used in making polyester resins for high-quality industrial coatings or unsaturated polyesters for the fiberglass-reinforced plastics industry with excellent performance characteristics.

Eastman Ecdel 9967 elastomer

<i>Ecdel™ 9967 elastomer meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Ecdel elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance for flexible packaging including medical and pharmaceutical applications. Ecdel 9967 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. Ecdel 9967's high inherent viscosity may be helpful where good melt strength is required (blown film or profile extrusion).

Eastman Ecdel 9966 elastomer

<i>Ecdel™ 9966 elastomer meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Ecdel elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. Ecdel 9966's medium inherent viscosity makes it a good general purpose elastomer. Ecdel 9966 may be injection molded or extruded.

AQ - 38S Polymer

Eastman AQ™ 38S polymer offers superior water resistance with the following characteristics: ultrafine dispersions, excellent film formation properties, water phase dispersion, emulsifier function for organic materials such as organic UV absorbers with no neutralization needed. Because of its low Tg, it forms flexible films on the skin; imparts a smooth feel to creams, lotions, and sprays; and adheres to the skin. It provides excellent water resistance in sunscreen products.

AQ - 55S Polymer

Eastman AQ™ 55S polymer is a water-dispersible sulfopolyester that has good film integrity when combined with other cosmetic ingredients. It is the preferred AQ polymer to improve water and smudge resistance of water-based makeup and mascaras, and in hairstyling products, it provides excellent hold under high-humidity conditions and tunable firmness. It has a Tg of about 55° C. The "S" indicates the product is supplied as solid pellets.

AQ - 48 Ultra Polymer

Eastman AQ™ Ultra polymer is a sulfopolyester that disperses directly in a mixture of ethanol and water at room temperature or in warm water without the assistance of surfactants or other additives. It is designed specifically for use as a hair fixative in low-VOC (<55%) hair spray. AQ 48 can also be used to formulate clear styling gels.

Tenite Acetate 105E1R26033 - Clear - Trsp

Tenite™ Acetates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Acetate 105-33 is heat stabilized and has a plasticizer level of 33%.

Tenite Acetate 105E4T62328 - Natural - Trsp

Tenite™ Acetates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Acetate 105-28 is heat stabilized and has a plasticizer level of 28%.

Tenite Butyrate 264A3720013 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 264-13 has a plasticizer level of 13%.

Tenite Butyrate 264E2R30008 - Natural - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel.

Tenite Butyrate 264E4861310 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite Butyrate 264-10 has a plasticizer level of 10%.

Tenite Butyrate 285A3720010 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 285-10 has a 10% plasticizer level and an odor mask.

Tenite Butyrate 485A2R30016 - Natural

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 485-16 has a 16% plasticizer level, an odor mask, and ultraviolet inhibitor.

Tenite Butyrate 485E2R30010 - Natural - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 485-10 has a 10% plasticizer level, an odor mask, and ultraviolet inhibitor.

Tenite Butyrate 485E3720013 - Clear - Trsp

Tenite™ Cellulose Acetate Butyrate 485-13 contains an odor mask and an ultra-violet inhibitor (UVI). It has a plasticizer level of 13%.

Tenite Butyrate 485E3720016 - Clear - Trsp

Tenite™ Cellulose Acetate Butyrate 485-16 contains an odor mask and an ultra-violet inhibitor (UVI). It has a plasticizer level of 13%.

Tenite Butyrate 530E3720005 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 530-05 has a 5% plasticizer level and an odor mask.

Tenite Butyrate 530E3720010 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 530-10 has a 10% plasticizer level and an odor mask.

Tenite Butyrate 575E3720010 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 575-10 has a 10% plasticizer level and an odor mask.

Tenite Butyrate 576E3720010 - Clear - Trsp

Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 576-10 has a 10% plasticizer level and an odor mask.

Tenite Propionate 307A4000015 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 307-15 has a 15% plasticizer level.

Tenite Propionate 307E4000022 - Clear - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties if Tenite™ cellulosic plastics differ with plasticizer levels.

Tenite Propionate 350E0096914 - Natural - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary depending on the plasticizer level. This Tenite™ Propionate 350-14 has a natural, transparent color and a 14% plasticizer level.

Tenite Propionate 358A4000018 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 358-18 has a plasticizer level of 18%.

Tenite Propionate 360A4000012 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary depending on the plasticizer level. Tenite™ Propionate 360-12 is clear and has a 12% plasticizer level.

Tenite Propionate 360A4861307 - Clear - Trsp

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR> Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. Tenite Propionate 360-07 is clear, transparent, and has a plasticizer level of 7%. This product does not contain a mold release.

Tenite Propionate 360E0096914 - Natural - Trsp

Tenite™ Cellulosic Acetate Propionate 360-14 has a plasticizer level of 14%.

Tenite Propionate 360E4861312 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary depending on the plasticizer level. Tenite Propionate 360-12 is clear, resistant to high temperatures, and has a 12% plasticizer level.

Tenite Propionate 360E4861316 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary depending on the plasticizer level.

Tenite Propionate 371A2R30009 - Natural - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 371-09 has a 9% plasticizer level and mold release.

Tenite Propionate 371A4000012 - Clear - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 371-12 contains a mold release and has a plasticizer level of 12%.

Tenite Propionate 375E4000012 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 375-12 has a plasticizer level of 12%.

Tenite Propionate 376E4000012 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 376-12 has a 12% plasticizer level and an ultraviolet inhibitor.

Tenite Propionate 377E4861312 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite cellulose acetate propionate 377-12 has a plasticizer level of 12%.

Tenite Propionate 380A4000010 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary in each product depending on the plasticizer level. Tenite™ Propionate 380-10 has a 10% plasticizer level and is resistant to high temperatures.

Tenite Propionate 380A4000015 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary in each product depending on the plasticizer level. Tenite™ Propionate 380-15 has a 15% plasticizer level and is resistant to high processing temperatures.

Tenite Propionate 380A4000018 - Clear - Trsp

Tenite™ Cellulose Acetate Propionate 380-18 has a plasticizer level of 18%. It is resistant to high processing temperatures.

Tenite Propionate 383A2R30009 - Natural - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 383-09 has a 9% plasticizer level, high temperature resistance, and mold release.

Tenite Propionate 383A2R30010 - Natural - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. Tenite™ Cellulose Acetate Propionate 383-10 contains a mold release and has a plasticizer level of 10%.

Tenite Propionate 383A4000011 - Clear - Trsp

Tenite™ Cellulose Acetate Propionate 383-11 contains a mold release and has a plasticizer level of 11%.

Tenite Propionate 384A4000016 - Clear - Trsp

Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 384-16 has a 16% plasticizer level, high temperature resistance, and an ultraviolet inhibitor.

Eastar DN003 Copolyester - Natural

Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN003 contains a mold release.

Eastar DN004 Copolyester - Natural

Eastar™ DN004 copolyesters are brilliantly clear polymers and our toughest materials for the cosmetics and personal care packaging applications. It's very shatter resistant and offers excellent chemical resistance. DN004 contains a mold release.

Eastar BR003 Copolyester - Natural

Eastar™ BR003 copolyester contains an additive that provides optimum molding efficiency. It has excellent appearance and is nearly water clear. With superior chemical resistance, it maintains its physical properties and appearance when exposed to aromatic oils. BR003 is specifically formulated to provide the optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes. It also offers greater design flexibility and can work for virtually any toothbrush configuration; as a result, brands can offer unique models that are tough to replicate—and launch them quicker. With BR003, molders can also consolidate resins versus having single resins for single designs.

Eastman C-A-P cellulose ester NF (powder)

Eastman™ C-A-P enteric coating material is a pH-sensitive cellulose derivative designed for coating pharmaceutical tablets, capsules or granules. It may also be used as a matrix material in solid dose forms. It will withstand prolonged contact with acidic gastric fluids.

Acetic Acid - 65% Diluted

Acetic Acid is supplied by Eastman in several dilution strengths. Many users prefer a diluted form of the product to avoid the expense of heated storage tanks. This product is 65% dilution strength.

Tenite Propionate 350A4861313 - Clear - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel.

DOA Plasticizer - Kosher

Eastman™ DOA plasticizer (Bis(2-Ethylhexyl) Adipate), Kosher is a light colored, oily liquid generally used as a plasticizer for PVC. Eastman™ DOA plasticizer is used to produce clear films for food packaging applications.

Sustane SAIB CO (Sucrose Acetate Isobutyrate) - Food Grade - Kosher

Eastman Sustane™ SAIB CO Food Grade is a free-flowing liquid with a viscosity of less than 4,000 cP at room temperature.

Eastman Eastobond 19412 copolyester

Eastman Eastobond™ Copolyester 19412 is a plastic lidding film resin designed to adhere directly to monolayer PET food trays, rendering them recyclable.

Eastman cellulose acetate butyrate (CAB-171-15)

Eastman Cellulose Acetate Butyrate CAB-171-15 has the lowest butyryl content and the lowest degree of solubility in the Eastman cellulose ester product line.

Propionic Acid - Food Grade

Propionic Acid is a colorless, oily liquid that is miscible in water. This product is used when a food grade product is required in the food industry to produce esters, salts, and other derivatives.

Propionic Acid - Feed Grade

Eastman Propionic Acid Feed Grade is required for animal feed use, and can be used as a mold inhibitor for formula feed.

Acetic Acid - Glacial - Feed Grade

This product is offered for animal feed use. It can be used as a mold inhibitor for formula feed.

Acetaldehyde - Kosher

Eastman™ Acetaldehyde, Kosher is a highly reactive, flammable, colorless liquid. Acetaldehyde undergoes the general reactions of aldehydes and is important for numerous condensation, addition, and polymerization reactions.

Eastalloy Polymer DA003-8999K - Clear

Eastalloy™ DA003-8999K is a clear copolyester/polycarbonate alloy. This product has good impact strength, chemical resistance, dimensional stability and low shrinkage rates.

Acetic Acid - Glacial - USP

This grade of acetic acid meets the requirements of the U. S. Pharmacopeia (USP) and is produced under appropriate current good manufacturing practices (cGMP) for use in the production of pharmaceuticals.

Acetic Acid - Glacial - Food Grade - Kosher

This grade of glacial acetic acid meets the requirements of the Food Chemical Codex and is produced under appropriate current good manufacturing practices (cGMP) for use as a food additive.

MCHM - Crude

MCHM is a co-product that is used as an industrial chemical in coal floatation.

Propionic Anhydride - Kosher

Propionic Anhydride is a colorless liquid having a pungent odor and high boiling point. It is soluble in alcohol, ether, chloroform, and alkalies, but decomposes in water. This product is the Kosher grade offered by Eastman.

Eastman Cristal Renew 401-15 copolyester

Cristal™ Renew 401-15 copolyester is a high flow product that contains mold release for ease of ejection. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Eastek 4500 polymer

Eastman Eastek™ 4500 polymer is a high-performance polyester resin for polyurethane hot melt adhesive applications. Eastman Eastek 4500 polymer is designed to reduce viscosity, increase Tg, enhance UV resistance, and improve formulation compatibility to enable greater productivity, application consistency, and long-term durability of the bonded structure.

Tenite Butyrate 572E3720008 - Clear - Trsp

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel.

Eastman BioExtend 30 antioxidant solution

With superior performance at low concentrations, Eastman BioExtend™ 30 antioxidant solution slows down the oxidation process to prolong the shelf life of your biodiesel.

N-Butyric Acid - High Purity

Eastman™ Butyric acid (C<sub>3</sub>H<sub>7</sub>COOH) is a clear, colorless liquid, with a strong pungent odor. Esters and salts of butyric acid are used in a variety of applications including perfumes, flavorings, and animal feeds. Eastman offers a variety of grades of butyric acid appropriate for these various end uses.

Eastar GN120 Copolyester

Eastar™ GN120 Copolyester is a high flow product and contains a mold release. Other outstanding features of Eastar™ GN120 are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing.

Eastman cellulose acetate butyrate (CAB-171-15NF)

Eastman™ Cellulose Acetate Butyrate (CAB-171-15NF) can be used as coating material as the semi-permeable membrane for osmotic drug delivery.

Drystar 0831 Copolyester

Drystar™ 0831 Copolyester is a high flow product and contains a mold release. Other outstanding features of Drystar™ 0831 are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing.

Eastman Tritan TX2000 copolyester

Eastman Tritan TX2000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Eastman Tritan TX1000 copolyester

Eastman Tritan TX1000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Eastman Tritan TX1500HF copolyester

Eastman Tritan™ TX1500HF copolyester is a high flow grade of Eastman Tritan. Tritan TX1500HF has viscosity reductions of 40-50% relative to Tritan TX1000.

GSP01 Copolyester

GSP01 is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques including film and sheet extrusion.

Eastar EN058 Copolyester - Natural

Eastar™ EN058 Copolyester is a copolymer PET. It is crystallized and has an lntrinsic Viscosity of 0.58. Eastar™ EN058 copolyester is tailored to meet the need of the injection-molded cosmetics and personal care market. Eastar™ EN058 is crystallized to allow faster, high-temperature drying. Its high-flow characteristics allow faster cycle times.

Eastman Embrace copolyester

Eastman Embrace™ copolyester is a high shrink-rate solution that offers clarity to showcase graphics and excellent printability for maximum shelf appeal.

Eastman Embrace LV copolyester

Eastman Embrace™ LV copolyester is the one resin solution that enables differentiated labeling wrapped around highly contoured, complex and thin-walled containers requiring high ultimate shrinkage and optimal MD growth for less film usage.

Eastar MN058 Copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release.

Eastar MN059 Copolyester - Natural

Eastar™ Copolyester MN059 Natural is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates.

Eastar EN059 Copolyester - Natural

Eastar™ EN059 copolyester is an Eastman Specialty Plastics product for specific customer accounts only.

Eastman Tritan EX401 copolyester

Tritan EX401, specifically developed for the Infant Care market, is an amorphous copolyester with excellent appearance and clarity.

Eastman Tritan GX100 copolyester

Tritan GX100 can be found in a variety of heavy-gauge sheet end uses, including sneeze guards, separation barriers, outdoor signs, displays/in-store fixtures, and heat-sensitive applications in hospitals, office buildings, schools, and retailers. It has glasslike clarity and is free of materials of concern, including BPA.

Eastman Tritan FX100 copolyester

Eastman Tritan™ FX100 is a copolyester resin for extruded film applications where enhanced heat resistance and toughness are required. It works great in hot fill packaging for food, transaction and identification cards, and protective laminates.

Eastman Tritan FX200 copolyester

Eastman Tritan™ FX200 is a copolyester resin for calendered and extruded film applications where enhanced heat resistance and toughness are required. It works great in hot fill packaging for food, transaction and identification cards, and protective laminates.

Eastman Tritan VX301 copolyester

Tritan VX301 is an amorphous copolyester with excellent clarity and impact resistance. The outstanding chemical resistance, hydrolytic stability, and ease of processing make Tritan VX301 an ideal candidate for optical applications such as eyewear frames.

Eastman Tritan VX401 copolyester

Eastman Tritan(tm) copolyester VX401 is an amorphous copolyester with excellent clarity and impact resistance. The outstanding chemical resistance, hydrolytic stability, and ease of processing make Tritan VX401 an ideal candidate for a broad spectrum of optical applications

EastaPure - EB Solvent (EGBE or Ethylene glycol monobutyl ether)

Eastman EastaPure™ EB solvent is a high flash point, water miscible, colorless solvent providing slow evaporation rate and good viscosity control for a broad range of polymers, resins and coatings.

Eastman Tritan LX101 copolyester

Tritan LX101 is an amorphous copolyester with excellent appearance and clarity. Tritan LX101 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

EastaPure - EP Solvent

Eastman EastaPure™ EP solvent is a high flash point, water miscible, colorless solvent providing slow evaporation rates and good viscosity control for a broad range of polymers, resins and coatings.

2-Ethylhexanoic Acid - Europe

Eastman™ 2-Ethylhexanoic Acid, Europe is a colorless, high-boiling liquid having a mild odor. The metallic salts of Eastman™ 2-ethylhexanoic acid are used as driers for odorless paints, inks, varnishes, and enamels.

Eastman Tritan LX150HF copolyester

Eastman Tritan™ LX150HF copolyester is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Eastman Tritan™ LX150HF has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan™.

Eastman Tritan LX151HF copolyester

Eastman Tritan™ LX151HF is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Eastman Tritan™ LX151HF has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan™.

Eastman Tritan VX351HF copolyester

Tritan VX351HF is an amorphous copolyester with excellent clarity and impact resistance. The outstanding chemical resistance, hydrolytic stability, and ease of processing make Tritan™ VX351HF an ideal candidate for a broad spectrum of optical applications.

Eastman Tritan MX710 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><br>Eastman Tritan™ MX710 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Tritan MX710 has been formulated for medical devices.

Eastman BioExtend 30HP antioxidant solution

For those planning to sell their biodiesel in European markets and need an antioxidant additive to protect fuel stability, Eastman BioExtend™ 30 HP high-performance additive is the ideal choice.

Eastman Tritan MX711 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX711 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Tritan MX711 has been formulated for medical devices.

Eastman Tritan LX100 copolyester

Tritan LX100 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance.

Eastman Tritan LX201 copolyester

Eastman Tritan™ LX201 is an amorphous copolyester with excellent appearance and clarity. It was developed for the cosmetic, fragrance, and personal care markets.

Eastman Tritan TX1001 copolyester

Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Eastman Tritan TX2001 copolyester

Eastman Tritan(tm) TX2001 is an amorphous copolyester with excellent appearance and clarity. Tritan TX2001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Eastman Tritan TX1501HF copolyester

Eastman Tritan™ copolyester TX1501HF is a high flow grade of Eastman Tritan™. Eastman Tritan™ copolyester TX1501HF has viscosity reductions of 40-50% relative to Eastman Tritan™ copolyester TX1001.

Eastman Tritan LX200 copolyester

Eastman Tritan™ LX200 is an amorphous copolyester with excellent appearance and clarity.

Eastman Tritan MX731 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><br>Eastman Tritan™ Copolyester MX731 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX731 is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ Copolyester MX711.

Eastman Tritan MX730 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><br>Eastman Tritan™ MX730 copolyester is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ MX710 copolyester. Tritan MX730 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability.

Eastman Tritan MP100 copolyester

Eastman Tritan™ MP100 copolyester is suitable for use with most forms of sterilization including radiation and ethylene oxide. It is NOT suitable for autoclave/steam sterilization.

Eastman Tritan TX1800 copolyester

Eastman Tritan™ TX 1800 copolyester is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications.

Eastman Spectar 14471 copolyester

Eastman Spectar™ 14471 copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar 14471 is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.

Acetic Acid - Glacial - Water Grade

Contact an Eastman representative for additional information.

Eastman 168 SG (Sensitive Grade) Non-Phthalate Plasticizer

Eastman 168™ SG non-phthalate plasticizer is an enhanced grade of the industry-leading Eastman 168™ non-phthalate plasticizer, specifically targeted at more demanding applications such as medical devices, toys, childcare articles, and food contact applications.

Eastman Tritan TX1801 copolyester

Eastman Tritan™ TX1801 copolyester is an amorphous copolyester specifically developed for use in blow molding applications.

Benzoflex - 2-45 Plasticizer

Benzoflex™ 2-45 is industrially known for its excellent compatibility with polyvinyl acetate homopolymer and copolymer emulsions.

Benzoflex - 9-88 Plasticizer

Benzoflex™ 9-88 is a high solvating benzoate ester plasticizer that can be used in a wide variety of polymer systems and applications. Its diverse uses include resilient flooring, adhesives, caulks, and sealants.

Benzoflex - 9-88 SG Plasticizer

Benzoflex™ 9-88 SG is recommended for cast urethane applications that require minimum cure interference and maximum compatibility. It offers excellent inert filler acceptance, contributes improved tear strength, better rebound and reduce swell with certain solvents. It is adaptable to both metering and hand batch urethane mix systems.

Benzoflex - 50 Plasticizer

Benzoflex™50 is a versatile benzoate ester plasticizer providing exceptional utility in polyvinyl acetate adhesives, efficiency in acrylic latex caulks, and excellent solvating characteristics in plastisol and dry blended vinyl formulations.

Benzoflex - 131 Plasticizer

Benzoflex™ 131 is a clear, low viscosity organic liquid that is useful as a specialty plasticizer.

Benzoflex - 284 Plasticizer

Benzoflex™ 284 is an effective high solvating plasticizer especially suited for polyvinyl chloride applications requiring low temperature processing and/or high stain resistance.

Benzoflex - 352 Plasticizer

Benzoflex™ 352 is a solid modifier with a very high melt point for use in hot melt adhesives and powder coatings to improve processing characteristics and physical properties. As a processing aid for plastics, Benzoflex™ 352 improves the flow of vinyls.

Benzoflex - 354 Plasticizer

Benzoflex™ 354 is compatible with a wide range of synthetic resinous materials and imparts a softening and flexibilizing effect to these resins. It is suggested for use as a resin plasticizer/modifier in the formulation of specialty coatings and adhesives and polyvinyl chloride plastisols. It is also a non-bleeding plasticizer for vinyl plastisol printing inks used to decorate T-shirts.

Benzoflex - 1046 Plasticizer

Benzoflex™ 1046 imparts the highest stain resistance of any plasticizer used in PVC or in PVC acetate copolymers. Its high resin solvation at elevated temperatures, coupled with its tolerance for fillers, makes it the plasticizer of choice for wall coverings and for sheet vinyl floor coverings.

Benzoflex - LA-705 Plasticizer

Benzoflex™ LA-705 is a benzoate ester plasticizer formulated specifically for use in latex adhesives. It provides a unique combination of high performance, broad food contact approvals, and reduced EU labeling requirements.

Benzoflex - LC-531 Plasticizer

Benzoflex™ LC-531 plasticizer is formulated specifically for latex caulks. It was designed to pass the stringent performance requirements for caulk outlined in ASTM C- 920 and ASTM C-834. It meets all of these performance requirements and is more environmentally friendly than other plasticizers for this application.

Benzoflex - PS-502 Plasticizer

Benzoflex™ PS-502 is a non-phthalate plasticizer designed for the B-component of two-component polysulfide sealants.

Benzoflex - RF-532 Plasticizer

Benzoflex™ RF-532 is a benzoate ester specifically designed for resilient vinyl flooring applications. Benzoflex™ RF-532 is a high solvating plasticizer that may be used in foam, clear or wear layers. Incorporation into the wear or clear layers of a construct imparts excellent stain and UV resistance. Foam layers produced with Benzoflex™ RF-532 are of superior quality.

Benzoflex - VP-953 Plasticizer

Benzoflex™ VP-953 is a benzoate ester specifically designed for vinyl plastisol applications. Benzoflex™ VP-953 is an excellent alternative to high solvating phthalate plasticizers.

Velate 375 Coalescent

Velate™ 375 is a non-phthalate, low VOC coalescent for waterborne coatings applications. This product is a very good alternative to conventional coalescents for formulating paints with very low VOC content without sacrificing surface appearance and durability.

Velate 262 Coalescent

Velate 262 is a clear organic liquid which is useful as a coalescing aid for water borne coatings. It is useful as a specialty plasticizer in some coatings applications.

DOM Plasticizer

Eastman™ Dioctyl Maleate is a co-monomer normally used in polymerization with vinyl acetate, vinyl chloride, styrene and derivatives of acrylic and methacrylic acids. It can be used in applications such as latex paints and textiles as well as a specialty plasticizer.

Benzoic Acid - Technical Grade - Flake

Eastman Benzoic acid is a mono-functional, aromatic acid, which is widely used as a building block for the synthesis of alkyd resins.

Benzoflex - 2088 Plasticizer

Benzoflex™ 2088 is a high solvating plasticizer known for its exceptional performance in PVC, polyvinyl acetate and water-based adhesive systems.

Benzoflex - TPU-405 Plasticizer

Benzoflex™ TPU-405 is recommended as a plasticizer for Thermoplastic Urethane (TPU) applications that require an extension of the durometer range commonly attributed to TPUs

Benzoflex - PS-507 Plasticizer

Benzoflex™ PS-507 is specifically formulated for use in single pack and 2K Polysulfide Sealants. When properly formulated, this product can be used to replace the plasticizers currently utilized in the A-Side of 2K formulations.

Provista GP Copolymer

Eastman Provista™ GP Copolymer is a clear, amorphous material created for the profile extrusion market.

Probenz SG Sodium Benzoate - Food Grade - Kosher

Eastman Probenz™ sodium benzoate is an established food preservative. It is primarily used as a preservative in the food and beverage industries as well as in personal care applications.

Probenz SP Powder Sodium Benzoate - Food Grade - Kosher

Probenz™ SP Powder sodium benzoate is an established food preservative. It is primarily used as a preservative in the food and beverage industries as well as in personal care applications. It is also used as a preservative in pharmaceutical and other applications where a powder form is preferred.

DE Solvent (Diethylene Glycol Monoethyl Ether)

Eastman DE Solvent (Diethylene Glycol Monoethyl Ether) is a very polar, slow-evaporating, mild odor, water-miscible solvent useful in wood stains and as a coalescent in latex paints and floor polishes.

Eastman Optifilm OT1200 additive

Eastman Optifilm™ additive OT1200 uniquely improves the application properties of your paint through improved workability and longer open time over a range of application conditions.

Admex - 523 Polymeric Plasticizer

Admex™ 523 is a low molecular weight, polymeric plasticizer. It is characterized by a mild ester odor and very light color. It imparts excellent processability to PVC compositions and is compatible with a wide variety of other polymers.

Admex - 760 Polymeric Plasticizer

Admex™ 760 is an ultra-high molecular weight, polymeric adipate. It possesses maximum resistance to extraction, migration and volatility.

Eastman Tritan MX810 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX810 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Eastman Tritan MX811 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Admex - 6187 Polymeric Plasticizer

Admex™ 6187 is a medium-to-high molecular weight, polymeric plasticizer. It is characterized by a mild ester odor and very light color. It possesses excellent permanence and allows for maximum physical property development.

Isopropyl Acetate

Eastman™ Isopropyl Acetate is a urethane grade, fast-evaporating, mild odor solvent that is miscible with most common organic solvents and has properties intermediate between ethyl and butyl acetates. It is an active solvent for many types of synthetic resins.

Probenz SP Extra Dry Sodium Benzoate - Food Grade - Kosher

Sodium benzoate extra dry is for use as a tableting lubricant for pharmaceutical and other applications. This fine powder form of sodium benzoate is engineered to achieve extremely low moisture content.

Eastman Spectar FR1000 copolyester

Eastman Spectar™ FR1000 copolyester concentrate can be added to Spectar, and other Eastman copolyesters to produce extruded sheet and profiles which meet ASTM E-84 requirements for a Class A flammability rating for interior finish applications.

Admex - 334F Polymeric Plasticizer

Admex™ 334F is recommended for critical uses where the PVC compound must be innocuous to foods.

Admex - 770 Polymeric Plasticizer

Admex™ 770 is a medium molecular weight, polymeric adipate. It is characterized by a mild ester odor and very light color. It possesses excellent extraction resistance and weatherability.

Admex - 525 Polymeric Plasticizer

<table width=640><tr><td>Admex™ 525 is a low molecular weight, polymeric plasticizer. </td></tr></table>

Admex - 6995 Polymeric Plasticizer

Admex™ 6995 is a medium molecular weight, light colored, polymeric adipate with a mild ester odor.

AQ - 65S Polymer

Aqueous dispersions of Eastman AQ™ 65S polymer provide excellent water resistance, alcohol resistance, fast drying rates, low odor, and a consistently low coefficient of friction.

Eastman 168 Non-Phthalate Plasticizer

Eastman 168 non-phthalate plasticizer is an excellent general purpose non-orthophtalate plasticizer with performance equal or better than most <i>ortho</i>-phthalate plasticizers. It offers good performance properties, excellent low temperature flexibility, resistance to extraction by soapy water, and excellent non-migration properties.

Eastar MN021 Copolyester - Natural

Eastman Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. <i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>

Skydrol 5

Skydrol 5 offers higher temperature capability than Type IV fluids, the lowest density, and better paint compatibility.

Skydrol 500B-4

Skydrol™ 500B-4 is the most worker friendly of the aviation phosphate esters; it is least irritating to skin and less prone to form mists which can be irritating to the respiratory tract .

Skydrol LD-4

Skydrol LD-4 features low density, excellent thermal stability, valve erosion prevention, and deposit control.

Skydrol PE-5

Skydrol PE-5 was developed to meet and exceed the more demanding Type V fluid requirements. It features the longest fluid life of any commercially available fluid, low density and low viscosity at low temperature.

Skykleen 1000

SkyKleen 1000 is an aviation solvent that combines excellent cleaning performance with environmentally friendly characteristics.

Skykleen 2000

Skykleen 2000 is an aviation cleaner that combines excellent cleaning performance with environmentally friendly characteristics.

Biphenyl

Applications for biphenyl process fluid include process media or solvents in many industries, including chemicals and petrochemicals.

Eastman Scandinol DOM

Eastman Scandinol™ DOM is a co-monomer normally used in polymerization with vinyl acetate, vinyl chloride, styrene and derivatives of acrylic and methacrylic acids. It can be used in applications such as latex paints and textiles as well as a specialty plasticizer.

Duralink HTS

<p>Chemical name:Hexamethylene-1,6-bis(thiosulphate),disodium salt, dihydrate</p><p>Molecular weight: 390</p><p>Duralink™ HTS is used in sulfur-based vulcanization systems to generate hybrid crosslinks which provide increased retention of physical and dynamic properties when exposed to anaerobic conditions at elevated temperatures such as those experienced during overcure, when using high curing temperatures or during product service life.</p>

4-ADPA

4-ADPA is used as a chemical intermediate.

Eastman Cristal Renew DN500MR-30 copolyester

Eastman Cristal™ Renew DN500MR-30 is copolyester is a high flow product designed and engineered for many different applications.

Eastman Tritan MXF121-17054X copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ MXF121 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Tritan MXF121 has been formulated for medical devices.

Eastman Embrace Encore Renew 50 copolyester

The world's leading shrink film just got better with the introduction of Eastman Embrace™ Encore Renew-50 to the Eastman Embrace™ family of resins.

Eastman Cristal Renew EN076-100 copolyester

Eastman Cristal™ Renew copolyester EN076-100 is a copolyester designed to be fully compatible with the PET recycling stream. Thus, it enables brand owners to achieve recyclable cosmetics packaging with a combination of good color and high clarity for molded parts with an RIC1 resin.

Eastman Cristal Renew EB062-99.8 copolyester

Eastman Cristal™ Renew EB062-99.8 copolyester is a resin specifically developed for extrusion blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Cristal EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications.

Eastman Cristal Renew EN067-100 copolyester

Eastman Cristal™ Renew copolyester EN067-100 is a copolyester designed to be fully compatible with the PET recycling stream.

Eastman Cristal DN500MR copolyester

Eastman Cristal™ DN500MR copolyester is a high flow product designed and engineered for many different applications.

Eastman Cristal Renew DN500MR-50 copolyester

Eastman Cristal™ Renew DN500MR-50 is copolyester is a high flow product designed and engineered for many different applications.

Eastman Cristal Renew DN500MR-99 copolyester

Eastman Cristal™ Renew DN500MR-99 is copolyester is a high flow product designed and engineered for many different applications.

Eastman Cristal Renew 400-100 copolyester

Eastman Cristal™ 400-100 Renew copolyester is a high flow product. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew 401-99.9 copolyester

Eastman Cristal™ Renew 401-99.9 copolyester is a high flow product that contains mold release for ease of ejection. It is designed and engineered specifically for cosmetics packaging applications.

Eastman Cristal Renew DN500MR-10 copolyester

Eastman Cristal™ Renew DN500MR-10 copolyester is a high flow product designed and engineered for many different applications.

Benzoflex - 172 Plasticizer

Benzoflex™ 172 is an alkyl benzoate ester with low odor, low color, low viscosity and excellent compatibility with PVC. Benzoflex™ 172’s principal use is as viscosity reducer and plasticizer for PVC plastisols applications. Benzoflex™ 172 may also be used in other applications that require a low viscosity, high solvating plasticizer. These include polyurethane and lubricating oil formulations.

AIV - 2000 NC

AIV 2000 NC is a formic acid based product recommended for pre-wilted silage, and crimping applications.

Eastar copolyester 6763 Renew-25

Eastar™ Renew copolyester 6763-25 meets ISO 10993 and/or USP Class VI biocompatibility requirement.

Eastman Spectar Renew 14471-15 copolyester

Eastman Spectar™ Renew 14471-15 copolyester is a sparkling, clear plastic material that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards. Spectar™ 14471-15 is an ideal solution for displays/in-store fixtures. For these applications, Spectar is a proven alternative to polycarbonate and acrylic.

Eastman Tritan Renew MX711-50 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Eastman Tritan™ Renew MX711-50 copolyester has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Tritan MX711 has been formulated for medical devices.

Eastman Tritan Renew MX731-50 copolyester

<i>Meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><br>Eastman Tritan™ Renew MX731-50 Copolyester is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX731 is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ Renew MX711-50 Copolyester.

Eastman Tritan HX100 copolyester

Eastman Tritan™ HX100 is a copolyester resin for extruded film applications where enhanced heat resistance and toughness are required. It works great in hot fill packaging for food.

Eastar Renew DN011-50 copolyester

Eastar™ Renew DN011-50 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN011 contains a mold release.

Eastman Cristal One E Lux

Eastman Cristal™ One E Lux is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Embrace Encore Renew 35 copolyester

The world's leading shrink film just got better with the introduction of Eastman Embrace™ Encore Renew-35 to the Eastman Embrace™ family of resins.

Eastman Embrace LV Renew 35 copolyester

Eastman Embrace™ LV Renew-35 copolyester is the one resin solution that enables differentiated labeling wrapped around highly contoured, complex and thin-walled containers requiring high ultimate shrinkage and optimal MD growth for less film usage.

Eastar Renew GN001-50 Copolyester

Eastar(TM) Renew GN001-50 copolyester is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques.

Eastman Tritan Renew EX401-50 copolyester

Tritan™ Renew copolyester EX401-50, specifically developed for the Infant Care market, is an amorphous copolyester with excellent appearance and clarity.

Eastar Renew Copolyester GN001-50 01

Eastar(TM) Renew GN001-50 copolyester is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques.

Eastman Cristal One E Lux Renew 30

Eastman Cristal(TM) One E Lux Renew-30 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Cristal One E Lux Renew 50

Eastman Cristal(TM) One E Lux Renew-50 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Embrace LV Renew 50 copolyester

Eastman Embrace™ LV Renew-50 copolyester is the one resin solution that enables differentiated labeling wrapped around highly contoured, complex and thin-walled containers requiring high ultimate shrinkage and optimal MD growth for less film usage.

Eastman Cristal One E Lux Renew 100

Eastman Cristal(TM) One E Lux Renew-100 is a copolyester designed for to be fully compatible with the PET recycling stream for extrusion-blown molded bottles for the skincare, personal care and color cosmetics markets.

Eastman Ecdel 9966 Renew 50 elastomer

<i>Eastman Ecdel™ elastomer 9966 Renew-50 meets ISO 10993 and/or USP Class VI biocompatibility requirement</i><BR>Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. Eastman Ecdel™ elastomer 9966 Renew-50 medium inherent viscosity makes it a good general purpose elastomer. Ecdel 9966 may be injection molded or extruded.

Eastman AQ 6000 polymer

Eastman AQ(TM) 6000 polymer is a sulfopolyester that disperses directly in hot water without the assistance of surfactants or other additives. Eastman AQ 6000 polymer aids the dispersion of many hydrophobic ingredients in water-based products and forms clear films at room temperature from aqueous dispersions.

Eastman AQ 6100 polymer

Eastman AQ(TM) 6100 polyester is a polyester supplied as pellets. Aqueous dispersions of Eastman AQ 6100 provide excellent water resistance, alcohol resistance, fast drying rates, low odor, and a consistently low coefficient of friction.

Eastman Tetrashield PC4050 protective resin

Eastman Tetrashield™ PC4050 is a durable TMCD-based resin system designed for protective and industrial coatings.

DuraStar Renew DS1910HF-50 copolyester

DuraStar™ Renew DS1910HF-50 copolyester, Natural polymer contains a mold release. It has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. Easy to process, it flows readily, fills intricate molds, and is well suited for thick-wall applications.

Eastman Solus 2300 performance additive

Eastman Solus™ 2300 performance additive enables high solids coatings with optimized appearance that contribute to achieving VOC and productivity targets. Solus™ 2300 is a dry, free-flowing powder that is convenient to handle.

Eastman Solus™ 7150, food contact

Eastman Solus™ 7150, Food Contact, is a cellulose ester based additive masterbatch suitable for blending with polybutylene succinate (PBS) resin for extrusion coating on paper.

Eastman Solus 7250 food contact

Solus™ 7250, Food Contact is a cellulose ester based additive masterbatch suitable for blending with polybutylene succinate (PBS) resin for extrusion coating on paper.

EastaPure - Isopropyl alcohol

Eastman EastaPure™ isopropyl alcohol is a high-purity solvent for use in demanding semiconductor manufacturing operations.

Esmeri cellulose ester micropowder (CC1N10)

Naturally derived, non-microplastic biodegradable<sup>1</sup>, and non-nano<sup>2</sup> cellulose ester micropowder. When added to cosmetic and personal care products Eastman Esmeri™ CC1N10 provides long-lasting soft focus properties and leaves a matte skin finish while improving texture and sensorial experience.</br></br></br></br> <sup>1</sup>In compliance with (EU) 2023/2055 "Synthetic Polymer Microparticles"</br></br></br> <sup>2</sup> According to EC recommendation of (2022/C 229/01)

Eastman Solus™ 1175 Performance Additive

Eastman Solus™ 1175 performance additive is a low-odor, free-flowing powder for use in printing inks and clear overprint varnishes. Properties include wide solubility in ink solvents and UV monomers, compatibility with other resins used in printing inks, and high melting point.

Eastman Solus™ 6500 Performance Additive

Eastman Solus™ 6500 performance additive is a low-odor, free-flowing powder for packaging.

Eastman Solus™ 5375 performance additive

In wood coatings, Eastman Solus™ 5375 gives clear films, reduces surface tack and mottling, minimizes cratering, improves flow and thermal reflow, and provides inter coat adhesion and good UV stability.

Eastman Solus™ 5250 performance additive

Eastman Solus™ 5250 performance additive is designed to provide high-performance for wood coatings.

Eastman Solus™ 5175 performance additive

Eastman Solus™ 5175 performance additive is designed to provide high-performance for wood coatings.

Eastman Solus™ 5150 performance additive

Eastman Solus™ 5150 performance additive is designed to provide high-performance for wood coatings.

Eastman Solus™ 6130 performance additive

Eastman Solus™ 6130 performance additive is a cellulose-based resin for film-free metallized packaging.

Eastman Solus™ 6450 performance additive

Eastman Solus™ 6450 performance additive is a cellulose-based resin for film-free metallized packaging

Eastman Solus™ 6905 performance additive

Eastman Solus™ 6905 performance additive is used in film-free metallized packaging.

Eastman Solus™ 6959 performance additive

Eastman Solus™ 6959 performance additive is designed for film-free metallized packaging.

Eastman Solus™ 1000 performance additive

Eastman Solus™ 1000 performance additive is designed to deliver on the high performance expectations required of ink formulations.

Eastman Solus™ 1100 performance additive

Eastman Solus™ 1100 performance additive is designed to deliver on the high performance expectations required of ink formulations. The robust properties of this distinctive material provide reduced surface tack, improved flow, and good UV stability.

Eastman Solus™ 1250 performance additive

Eastman Solus™ 1250 performance additive is designed to deliver on the high performance expectations required of ink formulations.

Eastman Solus™ 8050 performance additive

Eastman Solus™ 8050 performance additive is a cellulose ester with medium butyryl content and high viscosity.

Eastman Solus™ 8075 performance additive

Eastman Solus™ 8075 performance additive is a cellulose ester with medium butyryl content and medium viscosity.

Eastman Solus™ 9142 performance additive

Eastman Solus™ 9142 performance additive is a cellulose ester that is designed to perform well in demanding applications. The unique attributes of this product enable clear non-yellowing films, good UV stability, minimized cratering and strong inter-coat adhesion. With a low Tg (glass transition temperature) and low M(n), it is compatible with many other coating components and numerous cross-linking resins, offers low solution viscosity in a wide range of solvents & solvent combinations, and improves flow & thermal reflow. Supplied in pellet form to facilitate flexibility & ease of handling, Solus™ 9142 forms a clear colorless solution when dissolved.</br>

Eastman Solus™ 1100 ES-65 performance additive

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1100 ES-65 performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. The robust properties of this distinctive material provide reduced surface tack, improved flow, and good UV stability.</br></br></br> </br></br></br> This cellulose ester enables lower solution viscosities with the lowest glass transition temperature (Tg) in the cellulose acetate butyrate portfolio. The relatively low molecular weight (M(n)) of Solus™ 1100 ES-65 (as compared to other cellulose esters) supports compatibility with other formulation components, including a wide range of cross-linking resins and curing resin systems. Solus™ 1100 ES-65 is available in pellet form.

Eastman Solus™ 5350 performance additive

Eastman Solus™ 5350 performance additive is designed to provide high-performance in building and construction coatings. This cellulose ester enables coatings to exhibit UV stability & non-yellowing, excellent inter-coat adhesion, clear films, and superior avoidance of surface defects via flow & leveling properties. Production benefits include reduced surface tack, improved thermal reflow, broad compatibility with curing resins & other coating components, low solution viscosity and solubility in a wide range of solvents & solvent combinations. When dissolved in appropriate solvents, a clear colorless solution is produced. Solus™ 5350 is supplied in pellet form, offering formulation convenience, ease of handling and maximum formulating flexibility. </br></br></br> Eastman Solus™ 5350 is based on cellulose, one of the most abundant natural renewable resources.</br></br></br> For applications that require food contact compliance, please discuss requirements with your Eastman technical expert.

Eastman Solus™ 5850 performance additive

Brands today are seeking to differentiate in a crowded market, and coatings that are eye-catching, high-quality and durable under a wide range of situations can help these brands to stand out. Eastman Solus™ 5850 performance additive is designed to provide high-performance in consumer products. This Solus™ product is useful for lacquers for glass, plastic and wire, and it enables coatings with a clear non-yellowing film, strong avoidance of surface defects as a result of flow and levelling properties, minimized cratering, good UV stability and superior inter-coat adhesion. Further, efficient production is facilitated by reduced surface tack, improved thermal reflow, low solution viscosity, broad compatibility with curing resins & other coating components, and solubility in a wide range of solvents and solvent combinations. A clear, colorless solution will result when this product is dissolved in appropriate solvents. Solus™ 5850 is supplied in pellet form to support maximum formulating flexibility and ease of handling. </br>

Eastman Solus™ 5875 performance additive

Brands today are seeking to differentiate in a crowded market, and coatings that are eye-catching, high-quality and durable under a wide range of situations can help these brands to stand out. Eastman Solus™ 5875 performance additive is designed to provide high-performance in consumer products. </br>

Eastman Solus™ 3450 performance additive

Today's industrial products face high market expectations for performance, durability & appearance, as well as manufacturers' need for efficient production. Eastman Solus™ 3450 performance additive is designed to provide this high performance based on good UV stability, superior inter-coat adhesion, minimized cratering, and a clear film.</br>

Eastman Solus™ 3475 performance additive

Today's industrial products face high market expectations for performance, durability & appearance, as well as manufacturers' need for efficient production. Eastman Solus™ 3475 performance additive is designed to provide this high performance thanks to strong compatability with numerous cross-linking resins while maintaining a lower solution viscosity.

Eastman Solus™ 1200 performance additive

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1200 performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. </br>

Eastman Solus™ 3600 performance additive

Today's industrial products face high market expectations for performance, durability & appearance, as well as manufacturers' need for efficient production. Eastman Solus™ 3600 performance additive is designed to provide this high performance with strong reactivity, good UV stability that maintains film color over long periods of time, superior adhesion and improved pigment dispersion.

Eastman Solus™ 5900 performance additive

Brands today are seeking to differentiate in a crowded market, and coatings that are eye-catching, high-quality and durable under a wide range of situations help these brands to stand out. Eastman Solus™ 5900 performance additive is designed to provide high-performance in consumer products, electronics and plastic coatings. </br>

Eastman Solus™ 1475 performance additive

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1475 performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. </br>

Eastman cellulose acetate (CA-398-30)

Eastman Cellulose Acetate CA-398-30 is a high-viscosity, high molecular weight cellulose acetate supplied as fine, dry, free-flowing powder. Its relatively uniform particle size permits good plasticizer distribution during blending and it offers good physical properties for molded and extruded articles.

Eastman Solus™ 1150 performance additive

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1150 performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. </br>

Eastman Solus™ 1300 performance additive

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1300 performance additive is designed to deliver on the high performance expectations required of ink and metal packaging formulations. </br>

Eastman Solus™ 1150 performance additive, food contact

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1150 performance additive, food contact is designed to deliver on the high performance expectations required of ink and metal packaging formulations. </br>

Eastman Solus™ 1200 performance additive, food contact

Modern packaging formulations are expected to deliver stunning colors, high print throughput, flawless finishes, and durable graphics, all while protecting the safety of end-users. Eastman Solus™ 1200 performance additive, food contact is designed to deliver on the high performance expectations required of ink and metal packaging formulations. </br>

Eastman Solus™ 5700 performance additive

Modern consumer and industrial products must deliver on both high consumer-expectations for performance & appearance, as well as manufacturers' need for efficient production. Eastman Solus™ 5700 performance additive is designed to provide this high-performance in demanding consumer & industrial products, distinguished as a result of excellent surface hardness, moisture resistance and good film strength. This medium viscosity cellulose ester offers a combination of compatibility and solubility, and when dissolved in appropriate solvents a clear, colorless solution is produced. This product is supplied as a dry free-flowing powder, enabling production efficiencies due to ease of handling and storage. </br></br></br> Eastman Solus™ 5700 performance additve is based on cellulose, one of the most abundant natural renewable resources. </br></br></br> For applications that require food contact compliance, please refer to Eastman Solus™ 5700 performance addtive, food contact and discuss requirements with your Eastman technical representative.