Eastman

Products

Filter products by regional availability: 
43 Results Found - Showing 1 - 43
Cellulose Acetate - CA-398-3 
Eastman Cellulose Acetate CA-398-3 is one of the lower viscosity solution grades of cellulose acetate with an average ASTM viscosity of 3 seconds. Blended with appropriate solvents, plasticizers, and other modifying resins, it is used in coatings formulations for a variety of substrates. This multipurpose rheology enhancer provides high strength and good resistance to ultraviolet light, heat, oils and greases. It is useful in lacquers for glass, plastic, wire and release coatings.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate - CA-398-6 
Eastman Cellulose Acetate CA-398-6 is a low-viscosity solution grade cellulose acetate supplied in the form of fine, dry, free-flowing powder. Food additive regulations permit use of cellulose acetate in many film, packaging, and paper and paperboard food contact applications.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate - CA-398-30 
Eastman Cellulose Acetate CA-398-30 is a high-viscosity, high molecular weight cellulose acetate supplied as fine, dry, free-flowing powder. Its relatively uniform particle size permits good plasticizer distribution during blending and it offers good physical properties for molded and extruded articles.

Product availability by region: Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-171-15 
Eastman Cellulose Acetate Butyrate CAB-171-15 has the lowest butyryl content and the lowest degree of solubility in the Eastman cellulose ester product line. Films prepared with this ester offer superior toughness and hardness when compared with films prepared from other mixed esters.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-321-0.1 
Eastman Cellulose Acetate Butyrate CAB-321-0.1 is a cellulose ester with a low butyryl content (32.5%) and low molecular weight. Designed for use in automotive basecoats, it is resistant to attack and resistant to redisolve by solvents typical in clearcoats. It has a viscosity of 0.10 sec and 0.38 poise. CAB-321-0.1 is supplied as a fine white powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-0.1 
Eastman Cellulose Acetate Butyrate CAB-381-0.1 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels are needed. CAB-381-0.1 is used when lower viscosity for higher solids formulations and increased toughness with excellent surface hardness is desired. It is used in automotive basecoats for metallic flake control and is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-0.5 
Eastman Cellulose Acetate Butyrate CAB-381-0.5 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels is needed. It is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-2 
Eastman Cellulose Acetate Butyrate CAB-381-2 is a cellulose ester with medium butyryl content and high viscosity. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. It is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-2 BP 
Eastman Cellulose Acetate Butyrate CAB-381-2BP grade ester is a slight modification of the standard CAB-381-2 and has a higher hydroxyl and acetyl content and lower butyryl content. The BP grade was designed primarily to meet the needs of European formulators.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-20 
Eastman Cellulose Acetate Butyrate CAB-381-20 is a cellulose ester with medium butyryl content, very high ASTM(A) viscosity, and great rheological modification. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness and good film strength. It is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-20BP - 100% 
Eastman Cellulose Acetate Butyrate CAB-381-20BP grade ester is a lower hydroxyl content version of the standard CAB-381-20 and has a lower viscosity. The BP grade was designed primarily to meet the needs of European formulators.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-500-5 
Eastman Cellulose Acetate Butyrate CAB-500-5 is a cellulose ester with high butyryl content, low hydroxyl content and medium viscosity. It produces a relatively soft, flexible film requiring little or no plasticizer in many applications and offers a wide range of solubility and compatibility. It is useful in leather coatings and as a flow control additive in polyurethanes.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-531-1 
Eastman Cellulose Acetate Butyrate CAB-531-1 is a cellulose ester with a higher butyryl level than CAB-381 series esters. It offers improved compatibility, and due to its flexibility, it requires lower plasticizer modification. When combined with thermoplastic acrylic resins, it produces tough, weather and mar resistant films.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-551-0.01 
Eastman Cellulose Acetate Butyrate (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-551-0.2 
Eastman Cellulose Acetate Butyrate CAB-551-0.2 is a cellulose ester with high butyryl content and relatively low molecular weight. Its good compatibility with various resin systems and its solubility in a wide variety of solvents makes it useful as an additive in numerous coating compositions, including high-solids and thermoset coatings, and as a modifier for UV-curing systems.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-553-0.4 
Eastman Cellulose Acetate Butyrate CAB-553-0.4 is soluble in low molecular weight alcohols as well as other common organic solvents. It has alcohol solubility with excellent compatibility and pigment-wetting characteristics. High hydroxyl content allows a high level of crosslinking. It will produce colorless films with good ultraviolet stability and is supplied as dry, free-flowing powder, offering maximum formulating convenience and flexibility.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-482-0.5 
Eastman™ Cellulose Acetate Propionate CAP-482-0.5 is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-482-20 
Eastman Cellulose Acetate Propionate CAP-482-20 has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks, overprint varnishes, and nail lacquer topcoats.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-504-0.2 
Eastman Cellulose Acetate Propionate CAP-504-0.2 is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Chlorinated Polyolefin - 343-3 - 25% Solids in Xylene 
This product is a 25% solids solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 6-7. CP 343-3 has a good solvent tolerance for a wide range of solvents. The higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Eastar DN011 Copolyester 
Eastar™ DN011 copolyester is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar DN011 contains a mold release.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Provista Copolyester 
Eastman Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Solus 2100 Performance Additive 
Eastman Solus™ 2100 performance additive is designed as a rheology control additive for high solids 2K coatings. It is a dry, free-flowing powder that is convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tenite Butyrate 485E3720016 - Clear - Trsp 
Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel.

Product availability by region: Asia Pacific | North America

Tenite Butyrate 576E3720010 - Clear - Trsp 
Tenite™ Butyrates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Butyrate 576-10 has a 10% plasticizer level and an odor mask.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tenite Propionate 375E4000012 - Clear - Trsp 
Tenite™ Propionates are noted for their excellent balance of mechanical properties that vary from product to product depending on the plasticizer level. Tenite™ Propionate 375-12 has a plasticizer level of 12%.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Treva Engineering Bioplastic GC6011 - Clear 
Eastman TREVA GC6011 is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Treva Engineering Bioplastic GC6021 - Clear 
Eastman TREVA GC6021 is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Treva Engineering Bioplastic TR6021NAT - Natural 
Eastman TREVA™ TR6021 is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Treva Renew Engineering Bioplastic TR6021-71 - Clear 
Eastman TREVA Renew Engineering Bioplastic TR6021-71 Clear is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Treva Renew Engineering Bioplastic TR6021NAT-71 - Natural 
Eastman TREVA™ Renew engineering bioplastic TR6021-71 Natural is a cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX1000 
Eastman Tritan TX1000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX1001 
Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX1501HF 
Eastman Tritan™ copolyester TX1501HF is a high flow grade of Eastman Tritan™. Eastman Tritan™ copolyester TX1501HF has viscosity reductions of 40-50% relative to Eastman Tritan™ copolyester TX1001.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TX2001 
Eastman Tritan(tm) TX2001 is an amorphous copolyester with excellent appearance and clarity. Tritan TX2001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next-generation copolyester can also be molded into various applications without incorporating high levels of residual stress.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Copolyester TXF1021 - Natural 
Eastman Tritan™ TXF1021 copolyester is an amorphous, opaque material offering UL-94 V2 performance with outstanding aesthetics and gloss.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Tritan Renew Copolyester TX1000-25 
Eastman Tritan™ Renew TX1000-25 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This next generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan™ Renew TX1000-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America

Tritan Renew Copolyester TX1000-50 
Eastman Tritan™ Renew TX1000-50 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Eastman Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1000-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1000-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America

Tritan Renew Copolyester TX1001-25 
Eastman Tritan™ Renew TX1001-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX1001-25 contains a mold release derived from vegetable based sources. This product's most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1001-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1001-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX1001-50 
Eastman Tritan™ Renew TX1001-50 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX1001-50 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan Renew TX1001-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1001-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX1501HF-25 
Eastman Tritan™ Renew TX1501HF-25 is a high flow grade of Eastman Tritan. Tritan Renew TX1501HF-25 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1001, as well as Tritan Renew TX1001-25 and TX1001-50. Eastman Tritan Renew TX1501HF-25 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TX1501HF-25 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1501HF-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX1501HF-50 
Eastman Tritan™ Renew TX1501HF-50 is a high flow grade of Eastman Tritan. Tritan Renew TX1501HF-50 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester TX1001, as well as Tritan Renew TX1001-25 and TX1001-50. Tritan Renew TX1501HF-50 contains a mold release derived from vegetable based sources. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan Renew TX1501HF-50 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan Renew TX1501HF-50 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

Tritan Renew Copolyester TX2001-25 
Eastman Tritan™ Renew TX2001-25 is an amorphous copolyester with excellent appearance and clarity. Tritan Renew TX2001-25 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan Renew TX2001-25 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa

1
Results per page: 25  50  100  500  all
© 2022 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.