Eastman

Architectural coatings

Whether the challenge is responding to regulatory legislation, retail requirements, or consumer preferences, Eastman’s premier coalescent technologies will suit all wants and needs.

Filter products by regional availability: 
63 Results Found - Showing 1 - 50
Acetic Acid - Glacial 
For applications in drugs, foods, or feeds, Eastman provides glacial acetic acid in grades appropriate for these regulated uses.

Product availability by region: Asia Pacific | Latin America | North America

Acetic Anhydride 
Acetic Anhydride is manufactured by Eastman and Sipchem and supplied in various grades.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

N-Butanol 
Eastman™ n-Butanol is a four carbon straight chain oxo alcohol. It is a medium-boiling liquid that is useful as a chemical intermediate and as a solvent for ambient dry and baking coatings.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Butyl Acetate 
Eastman™ Butyl Acetate is a medium-boiling ester solvent with an evaporation rate of 1.0 making it ideal for quick drying nitrocellulose lacquers. A colorless liquid with a fruity odor, it is an active solvent for film-formers.

Product availability by region: Latin America | North America

N-Butyl Propionate 
Eastman™ n-Butyl Propionate is a non-HAP, slow-evaporating, and urethane grade solvent with good solvent activity for most coating resins. It provides low volatility to coatings formulations.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

C-11 Ketone 
Eastman C-11 Ketone is a low-cost, slow-evaporating, low-density mixture of ketone solvents. It is useful as a retarder solvent for primers, coil coatings, maintenance coatings and high-solids enamels. In these coatings, it improves gloss and leveling, reduces orange peel, minimizes solvent popping, and helps reduce VOCs. In many coatings, it can be used alone or blended with other solvents to replace isophorone and dibasic esters. Eastman C-11 Ketone has good solvency for a wide range of resins including nitrocellulose, alkyds, polyesters, acrylics, epoxies, and some vinyl chloride/vinyl acetate copolymers. Compared with other solvents in the same evaporation range, C-11 Ketone often offers an economic advantage.

Product availability by region: Asia Pacific | Latin America | North America

Cellulose Acetate - CA-320S 
Eastman Cellulose Acetate CA-320S is a cellulose ester with a high hydroxyl content. It is supplied as pellets.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate - CA-394-60LF 
Eastman Cellulose Acetate CA-394-60LF is a very high-melting, low odor cellulose ester having limited solubility and compatibility. This multipurpose rheology enhancer, offers high strength and good resistance to ultraviolet light, heat, oils, and greases. It is useful in lacquers for glass, plastic, wire and release coatings and is available in unfiltered pellet form.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate - CA-398-3 
Eastman Cellulose Acetate CA-398-3 is one of the lower viscosity solution grades of cellulose acetate with an average ASTM viscosity of 3 seconds. Blended with appropriate solvents, plasticizers, and other modifying resins, it is used in coatings formulations for a variety of substrates. This multipurpose rheology enhancer provides high strength and good resistance to ultraviolet light, heat, oils and greases. Useful in lacquers for glass, plastic, wire and release coatings.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate - CA-398-6 
Eastman Cellulose Acetate CA-398-6 is a low-viscosity solution grade cellulose acetate supplied in the form of fine, dry, free-flowing powder. Food additive regulations permit use of cellulose acetate in many film, packaging, and paper and paperboard food contact applications.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate - CA-398-10 
Eastman Cellulose Acetate CA-398-10 is a low-viscosity solution grade of cellulose acetate. It is used in a variety of coatings applications, pressure-sensitive tapes, and wood sealers.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-171-15 
Eastman Cellulose Acetate Butyrate CAB-171-15 has the lowest butyryl content and the lowest degree of solubility in the Eastman cellulose ester product line. Films prepared with this ester offer superior toughness and hardness when compared with films prepared from other mixed esters.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-321-0.1 
Eastman Cellulose Acetate Butyrate CAB-321-0.1 is a cellulose ester with a low butyryl content (32.5%) and low molecular weight. Designed for use in automotive basecoats, it is resistant to attack and resistant to redisolve by solvents typical in clearcoats. It has a viscosity of 0.10 sec and 0.38 poise. CAB-321-0.1 is supplied as a fine white powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-0.1 
Eastman Cellulose Acetate Butyrate CAB-381-0.1 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels are needed. CAB-381-0.1 is used when lower viscosity for higher solids formulations and increased toughness with excellent surface hardness is desired. It is used in automotive basecoats for metallic flake control and is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-0.5 
Eastman Cellulose Acetate Butyrate CAB-381-0.5 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels is needed. It is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-2 
Eastman Cellulose Acetate Butyrate CAB-381-2 is a cellulose ester with medium butyryl content and high viscosity. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. It is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-381-20 
Eastman Cellulose Acetate Butyrate CAB-381-20 is a cellulose ester with medium butyryl content, very high ASTM(A) viscosity, and great rheological modification. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness and good film strength. It is supplied as a dry, free-flowing powder.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-500-5 
Eastman Cellulose Acetate Butyrate CAB-500-5 is a cellulose ester with high butyryl content, low hydroxyl content and medium viscosity. It produces a relatively soft, flexible film requiring little or no plasticizer in many applications and offers a wide range of solubility and compatibility. It is useful in leather coatings and as a flow control additive in polyurethanes.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-531-1 
Eastman Cellulose Acetate Butyrate CAB-531-1 is a cellulose ester with a higher butyryl level than CAB-381 series esters. It offers improved compatibility, and due to its flexibility, it requires lower plasticizer modification. When combined with thermoplastic acrylic resins, it produces tough, weather and mar resistant films.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-551-0.01 
Eastman Cellulose Acetate Butyrate (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-551-0.2 
Eastman Cellulose Acetate Butyrate CAB-551-0.2 is a cellulose ester with high butyryl content and relatively low molecular weight. Its good compatibility with various resin systems and its solubility in a wide variety of solvents makes it useful as an additive in numerous coating compositions, including high-solids and thermoset coatings, and as a modifier for UV-curing systems.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Butyrate - CAB-553-0.4 
Eastman Cellulose Acetate Butyrate CAB-553-0.4 is soluble in low molecular weight alcohols as well as other common organic solvents. It has alcohol solubility with excellent compatibility and pigment-wetting characteristics. High hydroxyl content allows a high level of crosslinking. It will produce colorless films with good ultraviolet stability and is supplied as dry, free-flowing powder, offering maximum formulating convenience and flexibility.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-482-0.5 
Eastman Cellulose Acetate Propionate CAP-482-0.5 is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats. It is compliant with FDA additive regulations for use in certain food-contact applications.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-482-20 
Eastman Cellulose Acetate Propionate CAP-482-20 has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks, overprint varnishes, and nail lacquer topcoats.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Cellulose Acetate Propionate - CAP-504-0.2 
Eastman Cellulose Acetate Propionate CAP-504-0.2 is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Chlorinated Polyolefin - 343-1 - 25% Solids in Xylene 
This product is a 50% solids solution of Chlorinated Polyolefin 343-1 in Xylene. It has an 18-23 wt % chlorine content and a Gardner color value of 8. Excellent adhesion to polypropylene based substrates. Also promotes adhesion to steel, galvanized steel, phosphated steel, wood and rigid PVC.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Chlorinated Polyolefin - 343-3 - 50% Solids in Xylene 
This product is a 50% solution of Chlorinated Polyolefin 343-3 in Xylene. It has a 26-32 wt % chlorine content and a Gardner color value of 11. CP 343-3 has a good solvent tolerance for a wide range of solvents. Higher chlorine content than CP343-1 gives improved compatibility with co-resins. Recommended as stir-in additive to promote adhesion to PP-based substrates.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

DB Solvent (Diethylene Glycol Monobutyl Ether) 
Eastman™ DB Solvent (Diethylene Glycol Monobutyl Ether) improves the flow-out and gloss of baking enamels, is an effective coalescent in both architectural and industrial maintenance formulations, can be used in printing inks to increase dry times, and provides excellent coupling ability for the effective removal of contaminants in Industrial & Institutional and/or household cleaners.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

DB Solvent (Diethylene Glycol Monobutyl Ether) - Stabilized 
Eastman™ DB Solvent, Stabilized is a high-boiling glycol ether used in baking enamels, printing inks, textile dyeing, or as a coalescent in latex paints. This grade contains BHT antioxidant.

Product availability by region: North America

DE Solvent (Diethylene Glycol Monoethyl Ether) 
Eastman™ DE Solvent (Diethylene Glycol Monoethyl Ether) is a very polar, slow-evaporating, mild odor, water-miscible solvent useful in wood stains and as a coalescent in latex paints and floor polishes.

Product availability by region: Asia Pacific | Latin America | North America

DE-HG Solvent 
Eastman™ DE HG solvent is a blend of Eastman DE glycol ether and EG (70/30 wt. %). It is a colorless liquid, has very mild odor, and completely water miscible. It is used as a coalescent in latex paints and in floor polishes.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

DP Solvent (Diethylene Glycol Monopropyl Ether) 
Eastman DP Solvent (Diethylene Glycol Monopropyl Ether) is a slow-evaporating, water-miscible solvent useful in solution and water-based coatings. It is an active solvent for many coating materials and demonstrates very good coupling efficiency with resin systems in water-based coatings. Additionally, its low odor is advantageous in formulating printing inks and can be used in aqueous cleaners.

Product availability by region: Latin America | North America

EB Solvent (Ethylene Glycol Monobutyl Ether) 
Eastman™ EB Solvent (Ethylene Glycol Monobutyl Ether) offers numerous benefits in coating, ink, and cleaner applications. It is an excellent solvent for many coatings resin types, including alkyd, phenolic, maleic, epoxy, and nitrocellulose resins. Its unique combination of properties enables the effective removal of contaminants when used in Industrial & Institutional and/or household cleaners.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

EEH Solvent (Ethylene Glycol 2-Ethylhexyl Ether) 
Eastman EEH solvent (Ethylene Glycol 2-Ethylhexyl Ether) has long been used in performance specialty coatings applications. It offers an excellent balance of performance properties when used as a coalescent in architectural and industrial maintenance coatings.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

EEP Solvent (Ethyl 3-Ethoxypropionate) 
Eastman™ EEP (Ethyl 3-Ethoxypropionate) is slow evaporating with excellent activity for a wide range of coating polymers. It has moderate odor, low surface tension, and high electrical resistance. Its unique structure provides a variety of desirable properties not found in other solvents.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

EP Solvent (Ethylene Glycol Monopropyl Ether) 
Eastman™ EP Solvent (Ethylene Glycol Monopropyl Ether) is colorless and water-miscible over a wide range of temperatures with a slow evaporation rate. It is used in coatings and inks where a milder, less detectable odor is required and provides good viscosity control and high flash point. It can also be used to develop customized aqueous cleaners.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Ethyl Acetate - Urethane Grade 
Eastman™ Ethyl Acetate, Urethane Grade is a low-boiling, fast-evaporating solvent with a mild, pleasant odor. It is widely used in formulating printing inks, adhesives, and lacquers. Ethyl acetate is miscible with most organic solvents and can be used in cleaner blends fo the removal of oils, grease, and soils.

Product availability by region: Latin America | North America

2-Ethylhexanol 
This eight-carbon branched chain oxo alcohol with a high boiling point and slow evaporation rate features excellent reactivity as a chemical intermediate. It serves as a chain terminator in synthesizing condensation polymers and as an intermediate for plasticizers.

Product availability by region: Latin America | North America

Isobutyl Isobutyrate (IBIB) 
Eastman™ IBIB is a slow-evaporating, economical retarder solvent used in nitrocellulose lacquers, coatings for plastic substrates, and high solids coatings. It exhibits high electrical resistance and low surface tension.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Isobutanol 
Eastman™ Isobutanol is a medium-boiling, slow-evaporating, colorless liquid that is useful in organic synthesis, as a chemical intermediate, and as a solvent in coating applications.

Product availability by region: Latin America | North America

Isobutyl Acetate 
Eastman™ Isobutyl Acetate is a medium-boiling solvent with a typical mild, fruity, ester odor. Its combination of good solvent activity, desirable evaporation rate, and pleasant odor enables it to be used in a wide range of coating applications.

Product availability by region: Asia Pacific | Latin America | North America

Isophthalic Acid 
Eastman™ Isophthalic Acid is a high-melting, white powder that offers excellent performance characteristics to many types of high-quality industrial coatings and unsaturated polyester resins. PIA imparts excellent hardness, corrosion and stain resistance, thermal and hydrolytic stability, and low resin color.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Isopropyl Acetate 
Eastman™ Isopropyl Acetate is a urethane grade, fast-evaporating, mild odor solvent that is miscible with most common organic solvents and has properties intermediate between ethyl and butyl acetates. It is an active solvent for many types of synthetic resins.

Product availability by region: Asia Pacific | Latin America | North America

Methyl Acetate 
Eastman™ Methyl Acetate is an active, fast evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.

Product availability by region: Latin America | North America

Methyl Acetate - High Purity 
Eastman™ Methyl Acetate - High Purity is an active, urethane grade, fast-evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in polyurethane coatings and in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate, HP is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.

Product availability by region: Latin America | North America

Methyl Isobutyl Ketone 
Eastman™ Methyl Isobutyl Ketone (MIBK) is a medium-evaporating, low density, highly active solvent for use in inks, coatings, and adhesives. It is also used in a wide variety of other applications and markets.

Product availability by region: Latin America | North America

Methyl N-Propyl Ketone (MPK) 
Eastman™ MPK (Methyl n-Propyl Ketone) is a medium evaporating, urethane-grade solvent. It is an active solvent for most synthetic resins including acrylics, polyesters, cellulosics, epoxies, vinyls, and alkyds. Its high solvency, low density, and medium evaporation rate make it attractive as a letdown solvent for high-solids resins used in formulating coatings with low VOC content. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Neopentyl Glycol (NPG) - Glycol Platelets 
Eastman NPG™ is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. The platelet form is supplied in bags that exhibit excellent caking stability on storage.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Neopentyl Glycol (NPG) 90 
Eastman NPG™ 90 is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. This product is 90 parts NPG™ and 10 parts water, a liquid at or above 38°C, and delivered in bulk.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America

Optifilm Additive OT 1200 
Eastman Optifilm™ additive OT1200 uniquely improves the application properties of your paint through improved workability and longer open time over a range of application conditions.

Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America

1 2
Results per page: 25  50  100  500  all
© 2019 Eastman Chemical Company or its subsidiaries. All rights reserved.
As used herein, ® denotes registered trademark status in the U.S. only.