N-Butanol 
Eastman™ n-Butanol is a four carbon straight chain oxo alcohol. It is a medium-boiling liquid that is useful as a chemical intermediate and as a solvent for ambient dry and baking coatings.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Butyl Acetate
Eastman™ Butyl Acetate is a medium-boiling ester solvent with an evaporation rate of 1.0 making it ideal for quick drying nitrocellulose lacquers. A colorless liquid with a fruity odor, it is an active solvent for film-formers.
Product availability by region: Latin America | North America
|
N-Butyl Propionate
Eastman™ n-Butyl Propionate is a non-HAP, slow-evaporating, and urethane grade solvent with good solvent activity for most coating resins. It provides low volatility to coatings formulations.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
C-11 Ketone
Eastman C-11 Ketone is a low-cost, slow-evaporating, low-density mixture of ketone solvents. It is useful as a retarder solvent for primers, coil coatings, maintenance coatings and high-solids enamels. In these coatings, it improves gloss and leveling, reduces orange peel, minimizes solvent popping, and helps reduce VOCs. In many coatings, it can be used alone or blended with other solvents to replace isophorone and dibasic esters. Eastman C-11 Ketone has good solvency for a wide range of resins including nitrocellulose, alkyds, polyesters, acrylics, epoxies, and some vinyl chloride/vinyl acetate copolymers. Compared with other solvents in the same evaporation range, C-11 Ketone often offers an economic advantage.
Product availability by region: Asia Pacific | Latin America | North America
|
Cellulose Acetate - CA-394-60LF
Eastman Cellulose Acetate CA-394-60LF is a very high-melting, low odor cellulose ester having limited solubility and compatibility. This multipurpose rheology enhancer, offers high strength and good resistance to ultraviolet light, heat, oils, and greases. It is useful in lacquers for glass, plastic, wire and release coatings.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-381-0.5
Eastman Cellulose Acetate Butyrate CAB-381-0.5 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low application viscosities at relatively high solids levels is needed. It is supplied as a dry, free-flowing powder.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-381-2
Eastman Cellulose Acetate Butyrate CAB-381-2 is a cellulose ester with medium butyryl content and high viscosity. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength. It is supplied as a dry, free-flowing powder.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-381-20
Eastman Cellulose Acetate Butyrate CAB-381-20 is a cellulose ester with medium butyryl content, very high ASTM(A) viscosity, and great rheological modification. It offers a combination of solubility and compatibility, moisture resistance, excellent surface hardness and good film strength. It is supplied as a dry, free-flowing powder.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-381-20BP - 100%
Eastman Cellulose Acetate Butyrate CAB-381-20BP grade ester is a lower hydroxyl content version of the standard CAB-381-20 and has a lower viscosity. The BP grade was designed primarily to meet the needs of European formulators.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-500-5
Eastman Cellulose Acetate Butyrate CAB-500-5 is a cellulose ester with high butyryl content, low hydroxyl content and medium viscosity. It produces a relatively soft, flexible film requiring little or no plasticizer in many applications and offers a wide range of solubility and compatibility. It is useful in leather coatings and as a flow control additive in polyurethanes.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-531-1
Eastman Cellulose Acetate Butyrate CAB-531-1 is a cellulose ester with a higher butyryl level than CAB-381 series esters. It offers improved compatibility, and due to its flexibility, it requires lower plasticizer modification. When combined with thermoplastic acrylic resins, it produces tough, weather and mar resistant films.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-551-0.01
Eastman Cellulose Acetate Butyrate (CAB-551-0.01) has many unique attributes that will serve useful across many different coating application areas. It has the lowest Tg (glass transition temperature) of the CAB portfolio.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-551-0.2
Eastman Cellulose Acetate Butyrate CAB-551-0.2 is a cellulose ester with high butyryl content and relatively low molecular weight. Its good compatibility with various resin systems and its solubility in a wide variety of solvents makes it useful as an additive in numerous coating compositions, including high-solids and thermoset coatings, and as a modifier for UV-curing systems.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Butyrate - CAB-553-0.4
Eastman Cellulose Acetate Butyrate CAB-553-0.4 is soluble in low molecular weight alcohols as well as other common organic solvents. It has alcohol solubility with excellent compatibility and pigment-wetting characteristics. High hydroxyl content allows a high level of crosslinking. It will produce colorless films with good ultraviolet stability and is supplied as dry, free-flowing powder, offering maximum formulating convenience and flexibility.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Propionate - CAP-482-0.5
Eastman™ Cellulose Acetate Propionate CAP-482-0.5 is a low odor, free-flowing powder and is especially suitable for use in inks, overprint varnishes, and nail lacquer topcoats.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Propionate - CAP-482-20
Eastman Cellulose Acetate Propionate CAP-482-20 has similar characteristics to CAP-482-0.5, but with a higher viscosity. It is useful as a film former in inks, overprint varnishes, and nail lacquer topcoats.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Cellulose Acetate Propionate - CAP-504-0.2
Eastman Cellulose Acetate Propionate CAP-504-0.2 is a free-flowing powder with low odor, low color, and high hydroxyl content. It has a low viscosity (0.2 seconds) and an approximate propionyl content of 42.5 wt %. CAP-504-0.2 is compatible with many ink resins and solvents.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
DB Solvent (Diethylene Glycol Monobutyl Ether)
Eastman DB Solvent (Diethylene Glycol Monobutyl Ether) improves the flow-out and gloss of baking enamels, is an effective coalescent in both architectural and industrial maintenance formulations, can be used in printing inks to increase dry times, and provides excellent coupling ability for the effective removal of contaminants in Industrial & Institutional and/or household cleaners.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
DB Solvent (Diethylene Glycol Monobutyl Ether) - Stabilized
Eastman™ DB Solvent, Stabilized is a high-boiling glycol ether used in baking enamels, printing inks, textile dyeing, or as a coalescent in latex paints. This grade contains BHT antioxidant.
Product availability by region: North America
|
DP Solvent (Diethylene Glycol Monopropyl Ether)
Eastman DP Solvent (Diethylene Glycol Monopropyl Ether) is a slow-evaporating, water-miscible solvent useful in solution and water-based coatings. It is an active solvent for many coating materials and demonstrates very good coupling efficiency with resin systems in water-based coatings. Additionally, its low odor is advantageous in formulating printing inks and can be used in aqueous cleaners.
Product availability by region: Latin America | North America
|
EB Solvent (Ethylene Glycol Monobutyl Ether)
Eastman EB Solvent (Ethylene Glycol Monobutyl Ether) offers numerous benefits in coating, ink, and cleaner applications. It is an excellent solvent for many coatings resin types, including alkyd, phenolic, maleic, epoxy, and nitrocellulose resins. Its unique combination of properties enables the effective removal of contaminants when used in Industrial & Institutional and/or household cleaners.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
EEH Solvent (Ethylene Glycol 2-Ethylhexyl Ether)
Eastman EEH solvent (Ethylene Glycol 2-Ethylhexyl Ether) has long been used in performance specialty coatings applications. It offers an excellent balance of performance properties when used as a coalescent in architectural and industrial maintenance coatings.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
EEP Solvent (Ethyl 3-Ethoxypropionate)
Eastman™ EEP (Ethyl 3-Ethoxypropionate) is slow evaporating with excellent activity for a wide range of coating polymers. It has moderate odor, low surface tension, and high electrical resistance. Its unique structure provides a variety of desirable properties not found in other solvents.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
EP Solvent (Ethylene Glycol Monopropyl Ether)
Eastman™ EP Solvent (Ethylene Glycol Monopropyl Ether) is colorless and water-miscible over a wide range of temperatures with a slow evaporation rate. It is used in coatings and inks where a milder, less detectable odor is required and provides good viscosity control and high flash point. It can also be used to develop customized aqueous cleaners.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
EP Solvent (Ethylene Glycol Monopropyl Ether) - Stabilized
Eastman™ EP Solvent is colorless and water-miscible over a wide range of temperatures with a slow evaporation rate. It is used in coatings where a milder, less detectable odor is required. This product is stabilized with BHT.
Product availability by region: Asia Pacific | North America
|
Ethyl Acetate - Urethane Grade
Eastman™ Ethyl Acetate, Urethane Grade is a low-boiling, fast-evaporating solvent with a mild, pleasant odor. It is widely used in formulating printing inks, adhesives, and lacquers. Ethyl acetate is miscible with most organic solvents and can be used in cleaner blends fo the removal of oils, grease, and soils.
Product availability by region: Latin America | North America
|
2-Ethylhexanol
This eight-carbon branched chain oxo alcohol with a high boiling point and slow evaporation rate features excellent reactivity as a chemical intermediate. It serves as a chain terminator in synthesizing condensation polymers and as an intermediate for plasticizers.
Product availability by region: Latin America | North America
|
Isobutyl Isobutyrate (IBIB)
Eastman™ IBIB is a slow-evaporating, economical retarder solvent used in nitrocellulose lacquers, coatings for plastic substrates, and high solids coatings. It exhibits high electrical resistance and low surface tension.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Isobutyl Acetate
Eastman™ Isobutyl Acetate is a medium-boiling solvent with a typical mild, fruity, ester odor. Its combination of good solvent activity, desirable evaporation rate, and pleasant odor enables it to be used in a wide range of coating applications.
Product availability by region: Asia Pacific | Latin America | North America
|
Isopropyl Acetate
Eastman™ Isopropyl Acetate is a urethane grade, fast-evaporating, mild odor solvent that is miscible with most common organic solvents and has properties intermediate between ethyl and butyl acetates. It is an active solvent for many types of synthetic resins.
Product availability by region: Asia Pacific | Latin America | North America
|
Methyl Acetate
Eastman Methyl Acetate is an active, fast evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.
Product availability by region: Latin America | North America
|
Methyl Acetate - High Purity
Eastman™ Methyl Acetate - High Purity is an active, urethane grade, fast-evaporating, mild odor solvent for a broad range of coating and ink resins. It is useful in polyurethane coatings and in applications where fast solvent release and quick dry-to-touch times are required. Methyl acetate, HP is a VOC-exempt, non-HAP, non-ODS, readily biodegradable solvent that can be used in blends to develop environmentally friendly cleaners.
Product availability by region: Latin America | North America
|
Methyl Isobutyl Ketone
Eastman™ Methyl Isobutyl Ketone (MIBK) is a medium-evaporating, low density, highly active solvent for use in inks, coatings, and adhesives. It is also used in a wide variety of other applications and markets.
Product availability by region: Latin America | North America
|
Methyl Propyl Ketone (MPK)
Eastman™ MPK (Methyl n-Propyl Ketone) is a medium evaporating, urethane-grade solvent. It is an active solvent for most synthetic resins including acrylics, polyesters, cellulosics, epoxies, vinyls, and alkyds. Its high solvency, low density, and medium evaporation rate make it attractive as a letdown solvent for high-solids resins used in formulating coatings with low VOC content. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Methyl Propyl Ketone (MPK) - Ultra High Purity
Eastman™ MPK, UHP (Ultra High Purity) is a medium-evaporating, urethane grade, highly active solvent for most synthetic resins. It is ideal as a letdown solvent for high solids, air-dry resins used in low VOC alkyd and polyester/urethane coatings. It is used in gravure printing inks and also provides excellent performance for a wide range of cleaning and surface preparation applications for the transportation industry.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Optifilm Enhancer 300
Eastman Optifilm™ enhancer 300 is a low odor, coalescent that is safe, efficient and nonyellowing. Used in a variety of latex types, it is also compatible with solvent borne resins, improving the rheology, flexibility, and adhesion of coatings based on these resins. Eastman Optifilm™ enhancer 300 is VOC-exempt under the European Union Decopaint directive and Solvent Emissions Directive, the Australian Paint Approval Scheme.
Useful for preparing low viscosity weatherable PVC coil coatings. Coalescing aid with low volatility and excellent application properties. Excellent properties with associative thickeners.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
Optifilm Enhancer 400
Eastman Optifilm™ enhancer 400 is a low odor coalescent that is compatible with a variety of latex types, and it does not significantly contribute to the VOC content of paints.
Product availability by region: Asia Pacific | Europe, Middle East, & Africa | Latin America | North America
|
PM Acetate (Propylene Glycol Monomethyl Ether Acetate )
Eastman™ PM Acetate is a slow evaporating solvent with both ether and ester functional groups. It is a colorless liquid with a mild odor used as an effective retarder solvent as well as being an excellent solvent for many coating polymers.
Product availability by region: Latin America | North America
|
PM Solvent (Propylene Glycol Monomethyl Ether)
Eastman™ PM Solvent, a medium-boiling glycol ether, is an active solvent for cellulose acetate butyrate, nitrocellulose, epoxy, phenolic, acrylic, and alkyd resins. It is used in a variety of coating, printing ink, and cleaning applications.
Product availability by region: Latin America | North America
|
N-Propyl Alcohol (N-Propanol)
Eastman™ n-Propanol, a three-carbon straight chain oxo alcohol, is a medium-boiling, colorless liquid that is widely used in flexographic and other printing ink applications. It has a very mild odor, similar to that of ethanol and is completely soluble in water.
Product availability by region: Asia Pacific | Latin America | North America
|
N-Propyl Propionate
Eastman™ n-Propyl Propionate is a non-HAP, medium evaporating, urethane grade solvent with good activity for most coating resins.
Product availability by region: Europe, Middle East, & Africa | Latin America | North America
|
|
|
Results per page: 25
50
100
500
all
|
|